! Started logfile: J0324-2918_X_2005_05_12_yyk_uvs.log on Sat Oct 8 16:53:29 2005 obs J0324-2918_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0324-2918_X_2005_05_12_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.638384 visibilities/baseline/integration-bin. ! Found source: J0324-2918 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 1264 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0324-2918_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.14003 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6388 mas, bmaj=1.767 mas, bpa=-3.69 degrees ! Estimated noise=2.67924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675975 Jy ! Component: 100 - total flux cleaned = 0.0840353 Jy ! Total flux subtracted in 100 components = 0.0840353 Jy ! Clean residual min=-0.012948 max=0.019795 Jy/beam ! Clean residual mean=-0.000025 rms=0.003788 Jy/beam ! Combined flux in latest and established models = 0.0840353 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0840353 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.116196Jy sigma=1.323925 ! Fit after self-cal, rms=0.110020Jy sigma=1.250925 ! Inverting map and beam ! Estimated beam: bmin=0.6388 mas, bmaj=1.767 mas, bpa=-3.69 degrees ! Estimated noise=2.67924 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8419 mas, bmaj=2.269 mas, bpa=-6.384 degrees ! Estimated noise=1.69929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270641 Jy ! Component: 100 - total flux cleaned = 0.0349934 Jy ! Component: 150 - total flux cleaned = 0.0366396 Jy ! Component: 200 - total flux cleaned = 0.0370176 Jy ! Total flux subtracted in 200 components = 0.0370176 Jy ! Clean residual min=-0.009280 max=0.010271 Jy/beam ! Clean residual mean=-0.000045 rms=0.002744 Jy/beam ! Combined flux in latest and established models = 0.121053 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.121053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109798Jy sigma=1.174188 ! Fit after self-cal, rms=0.109952Jy sigma=1.173980 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8419 x 2.269 at -6.384 degrees (North through East) ! Clean map min=-0.0082847 max=0.098862 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.109952Jy sigma=1.173980 ! Fit after self-cal, rms=0.109952Jy sigma=1.173980 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109952Jy sigma=1.173980 ! Fit after self-cal, rms=0.109949Jy sigma=1.173951 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8419 mas, bmaj=2.269 mas, bpa=-6.384 degrees ! Estimated noise=1.69929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000586495 Jy ! Component: 100 - total flux cleaned = 0.000659561 Jy ! Component: 150 - total flux cleaned = 0.000725207 Jy ! Component: 200 - total flux cleaned = 0.000787038 Jy ! Total flux subtracted in 200 components = 0.000787038 Jy ! Clean residual min=-0.009087 max=0.009990 Jy/beam ! Clean residual mean=-0.000044 rms=0.002717 Jy/beam ! Combined flux in latest and established models = 0.12184 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.12184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109987Jy sigma=1.172931 ! Fit after self-cal, rms=0.109989Jy sigma=1.172853 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109989Jy sigma=1.172853 ! Fit after self-cal, rms=0.098166Jy sigma=1.031111 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00629559 Jy ! Component: 100 - total flux cleaned = 0.00648601 Jy ! Component: 150 - total flux cleaned = 0.00663488 Jy ! Component: 200 - total flux cleaned = 0.00669858 Jy ! Total flux subtracted in 200 components = 0.00669858 Jy ! Clean residual min=-0.008391 max=0.008647 Jy/beam ! Clean residual mean=-0.000033 rms=0.002405 Jy/beam ! Combined flux in latest and established models = 0.128539 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.128539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098550Jy sigma=1.024720 ! Fit after self-cal, rms=0.096631Jy sigma=1.011242 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8419 x 2.269 at -6.384 degrees (North through East) ! Clean map min=-0.0075893 max=0.10625 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096631Jy sigma=1.011242 ! Fit after self-cal, rms=0.096631Jy sigma=1.011242 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096631Jy sigma=1.011242 ! Fit after self-cal, rms=0.096258Jy sigma=1.009673 ! Inverting map and beam ! Estimated beam: bmin=0.8419 mas, bmaj=2.269 mas, bpa=-6.384 degrees ! Estimated noise=1.69929 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051078 Jy ! Component: 100 - total flux cleaned = 0.000618461 Jy ! Component: 150 - total flux cleaned = 0.000664894 Jy ! Component: 200 - total flux cleaned = 0.000714589 Jy ! Total flux subtracted in 200 components = 0.000714589 Jy ! Clean residual min=-0.008135 max=0.008293 Jy/beam ! Clean residual mean=-0.000033 rms=0.002355 Jy/beam ! Combined flux in latest and established models = 0.129253 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.129253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096299Jy sigma=1.008955 ! Fit after self-cal, rms=0.096222Jy sigma=1.008690 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096222Jy sigma=1.008690 ! Fit after self-cal, rms=0.096222Jy sigma=1.008690 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096222Jy sigma=1.008690 ! Fit after self-cal, rms=0.096215Jy sigma=1.008633 ! Inverting map and beam ! Estimated beam: bmin=0.8419 mas, bmaj=2.269 mas, bpa=-6.384 degrees ! Estimated noise=1.69929 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.30035e-05 Jy ! Component: 100 - total flux cleaned = 6.15891e-06 Jy ! Component: 150 - total flux cleaned = 4.22264e-05 Jy ! Component: 200 - total flux cleaned = 7.2906e-05 Jy ! Total flux subtracted in 200 components = 7.2906e-05 Jy ! Clean residual min=-0.008071 max=0.008154 Jy/beam ! Clean residual mean=-0.000033 rms=0.002346 Jy/beam ! Combined flux in latest and established models = 0.129326 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.129326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096215Jy sigma=1.008289 ! Fit after self-cal, rms=0.096226Jy sigma=1.008251 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=6.079 mas, bpa=4.844 degrees ! Estimated noise=2.18715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316432 Jy ! Component: 100 - total flux cleaned = 0.00322407 Jy ! Component: 150 - total flux cleaned = 0.00327773 Jy ! Component: 200 - total flux cleaned = 0.00333111 Jy ! Total flux subtracted in 200 components = 0.00333111 Jy ! Clean residual min=-0.009845 max=0.008866 Jy/beam ! Clean residual mean=-0.000045 rms=0.003126 Jy/beam ! Combined flux in latest and established models = 0.132657 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.132657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096498Jy sigma=1.009593 ! Fit after self-cal, rms=0.096491Jy sigma=1.009460 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6388 mas, bmaj=1.767 mas, bpa=-3.69 degrees ! Estimated noise=2.67924 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0849941 Jy ! Component: 100 - total flux cleaned = 0.108253 Jy ! Component: 150 - total flux cleaned = 0.114088 Jy ! Component: 200 - total flux cleaned = 0.11675 Jy ! Total flux subtracted in 200 components = 0.11675 Jy ! Clean residual min=-0.010756 max=0.010133 Jy/beam ! Clean residual mean=-0.000021 rms=0.002782 Jy/beam ! Combined flux in latest and established models = 0.11675 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.11675 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8419 mas, bmaj=2.269 mas, bpa=-6.384 degrees ! Estimated noise=1.69929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.6, -19.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137048 Jy ! Component: 100 - total flux cleaned = 0.0184292 Jy ! Component: 150 - total flux cleaned = 0.0189714 Jy ! Component: 200 - total flux cleaned = 0.0194476 Jy ! Total flux subtracted in 200 components = 0.0194476 Jy ! Clean residual min=-0.008002 max=0.007178 Jy/beam ! Clean residual mean=-0.000019 rms=0.002185 Jy/beam ! Combined flux in latest and established models = 0.136197 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.136197 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=6.079 mas, bpa=4.844 degrees ! Estimated noise=2.18715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281208 Jy ! Component: 100 - total flux cleaned = 0.00307343 Jy ! Component: 150 - total flux cleaned = 0.00325073 Jy ! Component: 200 - total flux cleaned = 0.00356349 Jy ! Total flux subtracted in 200 components = 0.00356349 Jy ! Clean residual min=-0.009960 max=0.008563 Jy/beam ! Clean residual mean=-0.000015 rms=0.002901 Jy/beam ! Combined flux in latest and established models = 0.139761 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.139761 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8419 mas, bmaj=2.269 mas, bpa=-6.384 degrees ! Estimated noise=1.69929 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000795786 Jy ! Component: 100 - total flux cleaned = -0.000651655 Jy ! Component: 150 - total flux cleaned = -0.00077405 Jy ! Component: 200 - total flux cleaned = -0.000878963 Jy ! Total flux subtracted in 200 components = -0.000878963 Jy ! Clean residual min=-0.008062 max=0.007025 Jy/beam ! Clean residual mean=-0.000014 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 0.138882 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 0.138882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094946Jy sigma=0.990188 ! Fit after self-cal, rms=0.094822Jy sigma=0.987120 wmodel J0324-2918_X_2005_05_12_yyk\_map.mod ! Writing 52 model components to file: J0324-2918_X_2005_05_12_yyk_map.mod wobs J0324-2918_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0324-2918_X_2005_05_12_yyk_uvs.fits wwins J0324-2918_X_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J0324-2918_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156931 Jy ! Component: 100 - total flux cleaned = -0.00120618 Jy ! Component: 150 - total flux cleaned = -0.0011014 Jy ! Component: 200 - total flux cleaned = -0.00110249 Jy ! Component: 250 - total flux cleaned = -0.00180926 Jy ! Component: 300 - total flux cleaned = -0.00287533 Jy ! Component: 350 - total flux cleaned = -0.00334494 Jy ! Component: 400 - total flux cleaned = -0.00397533 Jy ! Component: 450 - total flux cleaned = -0.00441264 Jy ! Component: 500 - total flux cleaned = -0.00483233 Jy ! Component: 550 - total flux cleaned = -0.00556992 Jy ! Component: 600 - total flux cleaned = -0.0062057 Jy ! Component: 650 - total flux cleaned = -0.00682432 Jy ! Component: 700 - total flux cleaned = -0.00772584 Jy ! Component: 750 - total flux cleaned = -0.00816536 Jy ! Component: 800 - total flux cleaned = -0.00866536 Jy ! Component: 850 - total flux cleaned = -0.00908564 Jy ! Component: 900 - total flux cleaned = -0.00970309 Jy ! Component: 950 - total flux cleaned = -0.0103082 Jy ! Component: 1000 - total flux cleaned = -0.0107042 Jy ! Component: 1050 - total flux cleaned = -0.0110947 Jy ! Component: 1100 - total flux cleaned = -0.0115404 Jy ! Component: 1150 - total flux cleaned = -0.0119157 Jy ! Component: 1200 - total flux cleaned = -0.0122236 Jy ! Component: 1250 - total flux cleaned = -0.0127101 Jy ! Component: 1300 - total flux cleaned = -0.0133076 Jy ! Component: 1350 - total flux cleaned = -0.0136601 Jy ! Component: 1400 - total flux cleaned = -0.0138921 Jy ! Component: 1450 - total flux cleaned = -0.0141784 Jy ! Component: 1500 - total flux cleaned = -0.0144042 Jy ! Component: 1550 - total flux cleaned = -0.0146266 Jy ! Component: 1600 - total flux cleaned = -0.0146815 Jy ! Component: 1650 - total flux cleaned = -0.0148997 Jy ! Component: 1700 - total flux cleaned = -0.0151684 Jy ! Component: 1750 - total flux cleaned = -0.0152753 Jy ! Component: 1800 - total flux cleaned = -0.0155912 Jy ! Component: 1850 - total flux cleaned = -0.0157991 Jy ! Component: 1900 - total flux cleaned = -0.0159026 Jy ! Component: 1950 - total flux cleaned = -0.0161572 Jy ! Component: 2000 - total flux cleaned = -0.0162584 Jy ! Total flux subtracted in 2048 components = -0.0164087 Jy ! Clean residual min=-0.003028 max=0.002595 Jy/beam ! Clean residual mean=-0.000012 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.122473 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 183 components and 0.122473 Jy ![Exited script file: muppet] wmap "J0324-2918_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8419 x 2.269 at -6.384 degrees (North through East) ! Clean map min=-0.0066355 max=0.10219 Jy/beam ! Writing clean map to FITS file: J0324-2918_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102193 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000974368 device "J0324-2918_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0324-2918_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.86038 2.86038 5.72075 11.4415 22.883 45.766 91.532 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8419 x 2.269 at -6.384 degrees (North through East) ! Clean map min=-0.0066355 max=0.10219 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0324-2918_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0324-2918_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0324-2918_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:53:33 2005