! Started logfile: J0301-1608_S_2005_06_30_yyk_uvs.log on Sat Oct  8 22:55:22 2005
obs J0301-1608_S_2005_06_30_yyk_uve.fits
! Reading UV FITS file: J0301-1608_S_2005_06_30_yyk_uve.fits
! AN table 1: 19 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.555556 visibilities/baseline/integration-bin.
! Found source: J0301-1608
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1477 lines of history.
! 
! Reading 1900 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0301-1608_S_2005_06_30_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 2.00x2.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.116011 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.232 mas, bmaj=17.56 mas, bpa=18.04 degrees
! Estimated noise=2.30178 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0566234 Jy
! Component: 100  -  total flux cleaned = 0.0671072 Jy
! Total flux subtracted in 100 components = 0.0671072 Jy
! Clean residual min=-0.010949 max=0.017361 Jy/beam
! Clean residual mean=0.000002 rms=0.003936 Jy/beam
! Combined flux in latest and established models = 0.0671072 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0671072 Jy
! 
! Correcting IF 1.
!  A total of 127 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 114 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.092617Jy  sigma=1.387241
! Fit after  self-cal, rms=0.087457Jy  sigma=1.275456
! Inverting map and beam 
! Estimated beam: bmin=8.232 mas, bmaj=17.56 mas, bpa=18.04 degrees
! Estimated noise=2.30178 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.804 mas, bmaj=20.55 mas, bpa=22.83 degrees
! Estimated noise=1.52342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158967 Jy
! Component: 100  -  total flux cleaned = 0.019214 Jy
! Component: 150  -  total flux cleaned = 0.0200869 Jy
! Component: 200  -  total flux cleaned = 0.0204288 Jy
! Total flux subtracted in 200 components = 0.0204288 Jy
! Clean residual min=-0.008940 max=0.019422 Jy/beam
! Clean residual mean=-0.000011 rms=0.003771 Jy/beam
! Combined flux in latest and established models = 0.087536 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 20 components and 0.087536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084813Jy  sigma=1.233257
! Fit after  self-cal, rms=0.082392Jy  sigma=1.187380
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.804 x 20.55 at 22.83 degrees (North through East)
! Clean map  min=-0.010131  max=0.074574 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.082392Jy  sigma=1.187380
! Fit after  self-cal, rms=0.082636Jy  sigma=1.189265
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082636Jy  sigma=1.189265
! Fit after  self-cal, rms=0.082578Jy  sigma=1.188087
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.748 mas, bmaj=20.34 mas, bpa=22.87 degrees
! Estimated noise=1.54095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172459 Jy
! Component: 100  -  total flux cleaned = 0.00216209 Jy
! Component: 150  -  total flux cleaned = 0.00191799 Jy
! Component: 200  -  total flux cleaned = 0.00181222 Jy
! Total flux subtracted in 200 components = 0.00181222 Jy
! Clean residual min=-0.010127 max=0.017381 Jy/beam
! Clean residual mean=-0.000015 rms=0.003670 Jy/beam
! Combined flux in latest and established models = 0.0893483 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.0893483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082088Jy  sigma=1.181132
! Fit after  self-cal, rms=0.082059Jy  sigma=1.180492
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082059Jy  sigma=1.180492
! Fit after  self-cal, rms=0.075150Jy  sigma=1.072634
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-26, -14).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200111 Jy
! Component: 100  -  total flux cleaned = 0.0295391 Jy
! Component: 150  -  total flux cleaned = 0.0330782 Jy
! Component: 200  -  total flux cleaned = 0.0346318 Jy
! Total flux subtracted in 200 components = 0.0346318 Jy
! Clean residual min=-0.005880 max=0.007121 Jy/beam
! Clean residual mean=0.000005 rms=0.001850 Jy/beam
! Combined flux in latest and established models = 0.12398 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 53 components and 0.12398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070415Jy  sigma=0.992732
! Fit after  self-cal, rms=0.069375Jy  sigma=0.976334
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.748 x 20.34 at 22.87 degrees (North through East)
! Clean map  min=-0.0058247  max=0.081756 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.88 mas, bmaj=22.1 mas, bpa=23.88 degrees
! Estimated noise=1.56642 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00561708 Jy
! Component: 100  -  total flux cleaned = 0.00824179 Jy
! Component: 150  -  total flux cleaned = 0.0103843 Jy
! Component: 200  -  total flux cleaned = 0.0112478 Jy
! Total flux subtracted in 200 components = 0.0112478 Jy
! Clean residual min=-0.004548 max=0.005510 Jy/beam
! Clean residual mean=0.000011 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 0.135228 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 67 components and 0.135228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068710Jy  sigma=0.966079
! Fit after  self-cal, rms=0.068599Jy  sigma=0.963828
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.228 mas, bmaj=17.57 mas, bpa=18.04 degrees
! Estimated noise=2.3152 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0707444 Jy
! Component: 100  -  total flux cleaned = 0.0972276 Jy
! Component: 150  -  total flux cleaned = 0.113408 Jy
! Component: 200  -  total flux cleaned = 0.124223 Jy
! Total flux subtracted in 200 components = 0.124223 Jy
! Clean residual min=-0.008616 max=0.008322 Jy/beam
! Clean residual mean=0.000014 rms=0.002453 Jy/beam
! Combined flux in latest and established models = 0.124223 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.124223 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.748 mas, bmaj=20.34 mas, bpa=22.87 degrees
! Estimated noise=1.54095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0067851 Jy
! Component: 100  -  total flux cleaned = 0.00957342 Jy
! Component: 150  -  total flux cleaned = 0.0122502 Jy
! Component: 200  -  total flux cleaned = 0.0134329 Jy
! Total flux subtracted in 200 components = 0.0134329 Jy
! Clean residual min=-0.005235 max=0.006226 Jy/beam
! Clean residual mean=0.000016 rms=0.001701 Jy/beam
! Combined flux in latest and established models = 0.137656 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 49 components and 0.137656 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.88 mas, bmaj=22.1 mas, bpa=23.88 degrees
! Estimated noise=1.56642 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169392 Jy
! Component: 100  -  total flux cleaned = 0.0024885 Jy
! Component: 150  -  total flux cleaned = 0.00328602 Jy
! Component: 200  -  total flux cleaned = 0.00398056 Jy
! Total flux subtracted in 200 components = 0.00398056 Jy
! Clean residual min=-0.004826 max=0.005423 Jy/beam
! Clean residual mean=0.000019 rms=0.001577 Jy/beam
! Combined flux in latest and established models = 0.141636 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 0.141636 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.748 mas, bmaj=20.34 mas, bpa=22.87 degrees
! Estimated noise=1.54095 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000807495 Jy
! Component: 100  -  total flux cleaned = 0.00116504 Jy
! Component: 150  -  total flux cleaned = 0.00142729 Jy
! Component: 200  -  total flux cleaned = 0.00167668 Jy
! Total flux subtracted in 200 components = 0.00167668 Jy
! Clean residual min=-0.005106 max=0.005274 Jy/beam
! Clean residual mean=0.000019 rms=0.001540 Jy/beam
! Combined flux in latest and established models = 0.143313 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 78 components and 0.143313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068266Jy  sigma=0.959821
! Fit after  self-cal, rms=0.068204Jy  sigma=0.958465
wmodel J0301-1608_S_2005_06_30_yyk\_map.mod
! Writing 78 model components to file: J0301-1608_S_2005_06_30_yyk_map.mod
wobs J0301-1608_S_2005_06_30_yyk\_uvs.fits
! Writing UV FITS file: J0301-1608_S_2005_06_30_yyk_uvs.fits
wwins J0301-1608_S_2005_06_30_yyk\_map.win
! wwins: Wrote 2 windows to J0301-1608_S_2005_06_30_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.65959e-05 Jy
! Component: 100  -  total flux cleaned = -0.000391007 Jy
! Component: 150  -  total flux cleaned = -0.000609636 Jy
! Component: 200  -  total flux cleaned = -0.000540459 Jy
! Component: 250  -  total flux cleaned = -0.000862598 Jy
! Component: 300  -  total flux cleaned = -0.00141369 Jy
! Component: 350  -  total flux cleaned = -0.00164842 Jy
! Component: 400  -  total flux cleaned = -0.00215824 Jy
! Component: 450  -  total flux cleaned = -0.00253962 Jy
! Component: 500  -  total flux cleaned = -0.00280233 Jy
! Component: 550  -  total flux cleaned = -0.00315524 Jy
! Component: 600  -  total flux cleaned = -0.00344791 Jy
! Component: 650  -  total flux cleaned = -0.00386987 Jy
! Component: 700  -  total flux cleaned = -0.00418457 Jy
! Component: 750  -  total flux cleaned = -0.0045773 Jy
! Component: 800  -  total flux cleaned = -0.00474631 Jy
! Component: 850  -  total flux cleaned = -0.00474714 Jy
! Component: 900  -  total flux cleaned = -0.00490772 Jy
! Component: 950  -  total flux cleaned = -0.00502558 Jy
! Component: 1000  -  total flux cleaned = -0.00510316 Jy
! Total flux subtracted in 1024 components = -0.00525394 Jy
! Clean residual min=-0.002354 max=0.002168 Jy/beam
! Clean residual mean=0.000011 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.138059 Jy
keep
! Adding 70 model components to the UV plane model.
! The established model now contains 148 components and 0.138059 Jy
![Exited script file: muppet]
wmap "J0301-1608_S_2005_06_30_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.748 x 20.34 at 22.87 degrees (North through East)
! Clean map  min=-0.003531  max=0.081394 Jy/beam
! Writing clean map to FITS file: J0301-1608_S_2005_06_30_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.081394 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000776837 
device "J0301-1608_S_2005_06_30_yyk\_map.eps/VPS"
! Attempting to open device: 'J0301-1608_S_2005_06_30_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.86325 2.86325 5.72649 11.453 22.906 45.812 91.6239
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0023 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.081 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.748 x 20.34 at 22.87 degrees (North through East)
! Clean map  min=-0.003531  max=0.081394 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0301-1608_S_2005_06_30_yyk\_map.gif/gif"
! Attempting to open device: 'J0301-1608_S_2005_06_30_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0301-1608_S_2005_06_30_yyk_uvs.log closed on Sat Oct  8 22:55:23 2005