! Started logfile: J0210-1444_X_2005_05_12_yyk_uvs.log on Sat Oct 8 16:50:24 2005 obs J0210-1444_X_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0210-1444_X_2005_05_12_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98 visibilities/baseline/integration-bin. ! Found source: J0210-1444 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1439 lines of history. ! ! Reading 1764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0210-1444_X_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.145649 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6665 mas, bmaj=1.72 mas, bpa=-1.499 degrees ! Estimated noise=1.49006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102734 Jy ! Component: 100 - total flux cleaned = 0.118715 Jy ! Total flux subtracted in 100 components = 0.118715 Jy ! Clean residual min=-0.007972 max=0.011110 Jy/beam ! Clean residual mean=-0.000027 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 0.118715 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.118715 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.083287Jy sigma=1.184752 ! Fit after self-cal, rms=0.080439Jy sigma=1.154910 ! Inverting map and beam ! Estimated beam: bmin=0.6665 mas, bmaj=1.72 mas, bpa=-1.499 degrees ! Estimated noise=1.49006 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8035 mas, bmaj=2.066 mas, bpa=0.2376 degrees ! Estimated noise=1.10278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144096 Jy ! Component: 100 - total flux cleaned = 0.0201639 Jy ! Component: 150 - total flux cleaned = 0.0232172 Jy ! Component: 200 - total flux cleaned = 0.0248587 Jy ! Total flux subtracted in 200 components = 0.0248587 Jy ! Clean residual min=-0.005596 max=0.006266 Jy/beam ! Clean residual mean=-0.000017 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.143573 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.143573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080023Jy sigma=1.118953 ! Fit after self-cal, rms=0.080024Jy sigma=1.118763 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8035 x 2.066 at 0.2376 degrees (North through East) ! Clean map min=-0.0051106 max=0.12489 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01995 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.13 KP 0.87 ! LA 1.00* MK 0.99 NL 0.97 OV 1.04 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.983604 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.91 KP 0.85 ! LA 1.00* MK 1.03 NL 1.18 OV 1.07 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.080024Jy sigma=1.118763 ! Fit after self-cal, rms=0.079780Jy sigma=1.105101 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079780Jy sigma=1.105101 ! Fit after self-cal, rms=0.079788Jy sigma=1.105059 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8093 mas, bmaj=2.083 mas, bpa=0.5363 degrees ! Estimated noise=1.08982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148888 Jy ! Component: 100 - total flux cleaned = -0.00159255 Jy ! Component: 150 - total flux cleaned = -0.0015923 Jy ! Component: 200 - total flux cleaned = -0.00159129 Jy ! Total flux subtracted in 200 components = -0.00159129 Jy ! Clean residual min=-0.004783 max=0.005424 Jy/beam ! Clean residual mean=-0.000007 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.141982 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.141982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079658Jy sigma=1.104394 ! Fit after self-cal, rms=0.079655Jy sigma=1.104353 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079655Jy sigma=1.104353 ! Fit after self-cal, rms=0.074839Jy sigma=1.049232 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125605 Jy ! Component: 100 - total flux cleaned = 0.00138291 Jy ! Component: 150 - total flux cleaned = 0.00138364 Jy ! Component: 200 - total flux cleaned = 0.00140788 Jy ! Total flux subtracted in 200 components = 0.00140788 Jy ! Clean residual min=-0.004709 max=0.005025 Jy/beam ! Clean residual mean=-0.000006 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.14339 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.14339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074881Jy sigma=1.048678 ! Fit after self-cal, rms=0.074701Jy sigma=1.045794 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8093 x 2.083 at 0.5363 degrees (North through East) ! Clean map min=-0.0043067 max=0.12505 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074701Jy sigma=1.045794 ! Fit after self-cal, rms=0.073868Jy sigma=1.031639 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073868Jy sigma=1.031639 ! Fit after self-cal, rms=0.073893Jy sigma=1.031363 ! Inverting map and beam ! Estimated beam: bmin=0.8055 mas, bmaj=2.068 mas, bpa=0.87 degrees ! Estimated noise=1.05692 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00281281 Jy ! Component: 100 - total flux cleaned = -0.00328384 Jy ! Component: 150 - total flux cleaned = -0.00337144 Jy ! Component: 200 - total flux cleaned = -0.00337122 Jy ! Total flux subtracted in 200 components = -0.00337122 Jy ! Clean residual min=-0.004327 max=0.004235 Jy/beam ! Clean residual mean=-0.000009 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.140019 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.140019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073658Jy sigma=1.029630 ! Fit after self-cal, rms=0.073671Jy sigma=1.029577 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073671Jy sigma=1.029577 ! Fit after self-cal, rms=0.073502Jy sigma=1.028863 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073502Jy sigma=1.028863 ! Fit after self-cal, rms=0.073511Jy sigma=1.028799 ! Inverting map and beam ! Estimated beam: bmin=0.8087 mas, bmaj=2.064 mas, bpa=1.333 degrees ! Estimated noise=1.04595 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135977 Jy ! Component: 100 - total flux cleaned = -0.00142792 Jy ! Component: 150 - total flux cleaned = -0.00142951 Jy ! Component: 200 - total flux cleaned = -0.00142946 Jy ! Total flux subtracted in 200 components = -0.00142946 Jy ! Clean residual min=-0.004048 max=0.004466 Jy/beam ! Clean residual mean=-0.000011 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.138589 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.138589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073417Jy sigma=1.028156 ! Fit after self-cal, rms=0.073419Jy sigma=1.028128 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=4.234 mas, bpa=8.972 degrees ! Estimated noise=1.40078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201379 Jy ! Component: 100 - total flux cleaned = 0.00210405 Jy ! Component: 150 - total flux cleaned = 0.00223152 Jy ! Component: 200 - total flux cleaned = 0.00234921 Jy ! Total flux subtracted in 200 components = 0.00234921 Jy ! Clean residual min=-0.005492 max=0.004972 Jy/beam ! Clean residual mean=-0.000016 rms=0.001696 Jy/beam ! Combined flux in latest and established models = 0.140939 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 47 components and 0.140939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073461Jy sigma=1.028400 ! Fit after self-cal, rms=0.073451Jy sigma=1.028029 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6671 mas, bmaj=1.713 mas, bpa=-0.8937 degrees ! Estimated noise=1.43642 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102478 Jy ! Component: 100 - total flux cleaned = 0.11794 Jy ! Component: 150 - total flux cleaned = 0.124213 Jy ! Component: 200 - total flux cleaned = 0.126495 Jy ! Total flux subtracted in 200 components = 0.126495 Jy ! Clean residual min=-0.005630 max=0.006925 Jy/beam ! Clean residual mean=-0.000019 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.126496 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.126496 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8087 mas, bmaj=2.064 mas, bpa=1.333 degrees ! Estimated noise=1.04595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 1.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792006 Jy ! Component: 100 - total flux cleaned = 0.0118778 Jy ! Component: 150 - total flux cleaned = 0.0143578 Jy ! Component: 200 - total flux cleaned = 0.0158816 Jy ! Total flux subtracted in 200 components = 0.0158816 Jy ! Clean residual min=-0.004298 max=0.004026 Jy/beam ! Clean residual mean=-0.000008 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.142377 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 45 components and 0.142377 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=4.234 mas, bpa=8.972 degrees ! Estimated noise=1.40078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211321 Jy ! Component: 100 - total flux cleaned = 0.00284275 Jy ! Component: 150 - total flux cleaned = 0.00296757 Jy ! Component: 200 - total flux cleaned = 0.00305831 Jy ! Total flux subtracted in 200 components = 0.00305831 Jy ! Clean residual min=-0.005616 max=0.004902 Jy/beam ! Clean residual mean=-0.000008 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.145435 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.145435 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8087 mas, bmaj=2.064 mas, bpa=1.333 degrees ! Estimated noise=1.04595 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000956743 Jy ! Component: 100 - total flux cleaned = -0.00100186 Jy ! Component: 150 - total flux cleaned = -0.00100243 Jy ! Component: 200 - total flux cleaned = -0.00100173 Jy ! Total flux subtracted in 200 components = -0.00100173 Jy ! Clean residual min=-0.004126 max=0.003981 Jy/beam ! Clean residual mean=-0.000005 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.144434 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.144434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073125Jy sigma=1.023945 ! Fit after self-cal, rms=0.073072Jy sigma=1.023203 wmodel J0210-1444_X_2005_05_12_yyk\_map.mod ! Writing 57 model components to file: J0210-1444_X_2005_05_12_yyk_map.mod wobs J0210-1444_X_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0210-1444_X_2005_05_12_yyk_uvs.fits wwins J0210-1444_X_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J0210-1444_X_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136324 Jy ! Component: 100 - total flux cleaned = -0.000205724 Jy ! Component: 150 - total flux cleaned = -0.000467417 Jy ! Component: 200 - total flux cleaned = -0.000591606 Jy ! Component: 250 - total flux cleaned = -0.000710916 Jy ! Component: 300 - total flux cleaned = -0.000826702 Jy ! Component: 350 - total flux cleaned = -0.000827175 Jy ! Component: 400 - total flux cleaned = -0.000717907 Jy ! Component: 450 - total flux cleaned = -0.000612015 Jy ! Component: 500 - total flux cleaned = -0.000509166 Jy ! Component: 550 - total flux cleaned = -0.000458732 Jy ! Component: 600 - total flux cleaned = -0.000166645 Jy ! Component: 650 - total flux cleaned = -0.00012078 Jy ! Component: 700 - total flux cleaned = 1.80712e-05 Jy ! Component: 750 - total flux cleaned = 0.000108406 Jy ! Component: 800 - total flux cleaned = 0.000109895 Jy ! Component: 850 - total flux cleaned = 0.000414134 Jy ! Component: 900 - total flux cleaned = 0.000456469 Jy ! Component: 950 - total flux cleaned = 0.000623604 Jy ! Component: 1000 - total flux cleaned = 0.00078795 Jy ! Component: 1050 - total flux cleaned = 0.0010291 Jy ! Component: 1100 - total flux cleaned = 0.0011092 Jy ! Component: 1150 - total flux cleaned = 0.00141984 Jy ! Component: 1200 - total flux cleaned = 0.00149647 Jy ! Component: 1250 - total flux cleaned = 0.00179831 Jy ! Component: 1300 - total flux cleaned = 0.00183532 Jy ! Component: 1350 - total flux cleaned = 0.00187221 Jy ! Component: 1400 - total flux cleaned = 0.00198024 Jy ! Component: 1450 - total flux cleaned = 0.0019802 Jy ! Component: 1500 - total flux cleaned = 0.00198017 Jy ! Component: 1550 - total flux cleaned = 0.00204944 Jy ! Component: 1600 - total flux cleaned = 0.00211743 Jy ! Component: 1650 - total flux cleaned = 0.00221867 Jy ! Component: 1700 - total flux cleaned = 0.00238483 Jy ! Component: 1750 - total flux cleaned = 0.00231883 Jy ! Component: 1800 - total flux cleaned = 0.00238436 Jy ! Component: 1850 - total flux cleaned = 0.00244861 Jy ! Component: 1900 - total flux cleaned = 0.00244843 Jy ! Component: 1950 - total flux cleaned = 0.00244855 Jy ! Component: 2000 - total flux cleaned = 0.0024795 Jy ! Total flux subtracted in 2048 components = 0.00244806 Jy ! Clean residual min=-0.002011 max=0.002390 Jy/beam ! Clean residual mean=0.000000 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.146882 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 191 components and 0.146882 Jy ![Exited script file: muppet] wmap "J0210-1444_X_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8087 x 2.064 at 1.333 degrees (North through East) ! Clean map min=-0.0034849 max=0.11967 Jy/beam ! Writing clean map to FITS file: J0210-1444_X_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.119671 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000583577 device "J0210-1444_X_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0210-1444_X_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.46296 1.46296 2.92591 5.85182 11.7036 23.4073 46.8146 93.6292 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.119 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8087 x 2.064 at 1.333 degrees (North through East) ! Clean map min=-0.0034849 max=0.11967 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0210-1444_X_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0210-1444_X_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0210-1444_X_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:50:28 2005