! Started logfile: J0150-0725_S_2005_06_01_yyk_uvs.log on Sat Oct 8 16:49:33 2005 obs J0150-0725_S_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0150-0725_S_2005_06_01_yyk_uve.fits ! AN table 1: 21 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.89418 visibilities/baseline/integration-bin. ! Found source: J0150-0725 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1802 lines of history. ! ! Reading 3380 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0150-0725_S_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.163746 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=6.671 mas, bpa=-3.49 degrees ! Estimated noise=1.00302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115941 Jy ! Component: 100 - total flux cleaned = 0.150614 Jy ! Total flux subtracted in 100 components = 0.150614 Jy ! Clean residual min=-0.007085 max=0.016030 Jy/beam ! Clean residual mean=0.000022 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 0.150614 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.150614 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.072932Jy sigma=1.297313 ! Fit after self-cal, rms=0.072821Jy sigma=1.293876 ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=6.671 mas, bpa=-3.49 degrees ! Estimated noise=1.00302 mJy/beam. ! Added new window around map position (-8.5, -8.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201663 Jy ! Component: 100 - total flux cleaned = 0.0326799 Jy ! Total flux subtracted in 100 components = 0.0326799 Jy ! Clean residual min=-0.005536 max=0.009339 Jy/beam ! Clean residual mean=0.000015 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.183294 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.183294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066662Jy sigma=1.168062 ! Fit after self-cal, rms=0.066341Jy sigma=1.161652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.117 mas, bpa=-4.212 degrees ! Estimated noise=0.619385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -2.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122975 Jy ! Component: 100 - total flux cleaned = 0.0181958 Jy ! Component: 150 - total flux cleaned = 0.0207494 Jy ! Component: 200 - total flux cleaned = 0.0218889 Jy ! Total flux subtracted in 200 components = 0.0218889 Jy ! Clean residual min=-0.003548 max=0.003868 Jy/beam ! Clean residual mean=-0.000033 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.205183 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 66 components and 0.205183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064082Jy sigma=1.124776 ! Fit after self-cal, rms=0.063923Jy sigma=1.121427 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.193 x 8.117 at -4.212 degrees (North through East) ! Clean map min=-0.0030507 max=0.13127 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03359 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 0.95 KP 0.91 ! LA 1.12 MK 1.03 NL 0.94 OV 0.90 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988766 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.07 KP 0.98 ! LA 1.09 MK 1.00 NL 0.97 OV 1.00 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.063923Jy sigma=1.121427 ! Fit after self-cal, rms=0.063206Jy sigma=1.106797 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063206Jy sigma=1.106797 ! Fit after self-cal, rms=0.063205Jy sigma=1.106783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.047 mas, bpa=-3.71 degrees ! Estimated noise=0.619037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410005 Jy ! Component: 100 - total flux cleaned = 0.00614937 Jy ! Component: 150 - total flux cleaned = 0.00695277 Jy ! Component: 200 - total flux cleaned = 0.00756045 Jy ! Total flux subtracted in 200 components = 0.00756045 Jy ! Clean residual min=-0.004642 max=0.003534 Jy/beam ! Clean residual mean=0.000032 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.212743 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 88 components and 0.212743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062872Jy sigma=1.101816 ! Fit after self-cal, rms=0.062841Jy sigma=1.101091 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062841Jy sigma=1.101091 ! Fit after self-cal, rms=0.061196Jy sigma=1.065376 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195606 Jy ! Component: 100 - total flux cleaned = 0.00236843 Jy ! Component: 150 - total flux cleaned = 0.00252865 Jy ! Component: 200 - total flux cleaned = 0.00263889 Jy ! Total flux subtracted in 200 components = 0.00263889 Jy ! Clean residual min=-0.004511 max=0.003634 Jy/beam ! Clean residual mean=0.000025 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.215382 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 105 components and 0.215382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061084Jy sigma=1.063963 ! Fit after self-cal, rms=0.061025Jy sigma=1.061860 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 8.047 at -3.71 degrees (North through East) ! Clean map min=-0.0043177 max=0.13041 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061025Jy sigma=1.061860 ! Fit after self-cal, rms=0.061150Jy sigma=1.059633 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061150Jy sigma=1.059633 ! Fit after self-cal, rms=0.061148Jy sigma=1.059413 ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=8.017 mas, bpa=-3.657 degrees ! Estimated noise=0.623053 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204138 Jy ! Component: 100 - total flux cleaned = 0.00308893 Jy ! Component: 150 - total flux cleaned = 0.00331727 Jy ! Component: 200 - total flux cleaned = 0.00338356 Jy ! Total flux subtracted in 200 components = 0.00338356 Jy ! Clean residual min=-0.004650 max=0.003548 Jy/beam ! Clean residual mean=0.000021 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.218766 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 125 components and 0.218766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060982Jy sigma=1.058067 ! Fit after self-cal, rms=0.060977Jy sigma=1.057894 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060977Jy sigma=1.057894 ! Fit after self-cal, rms=0.060840Jy sigma=1.055210 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060840Jy sigma=1.055210 ! Fit after self-cal, rms=0.060837Jy sigma=1.055174 ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=8.007 mas, bpa=-3.876 degrees ! Estimated noise=0.62149 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525884 Jy ! Component: 100 - total flux cleaned = 0.000600509 Jy ! Component: 150 - total flux cleaned = 0.000668256 Jy ! Component: 200 - total flux cleaned = 0.000699507 Jy ! Total flux subtracted in 200 components = 0.000699507 Jy ! Clean residual min=-0.004455 max=0.003518 Jy/beam ! Clean residual mean=0.000021 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.219465 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 139 components and 0.219465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060814Jy sigma=1.054547 ! Fit after self-cal, rms=0.060812Jy sigma=1.054470 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.825 mas, bmaj=13.71 mas, bpa=-0.131 degrees ! Estimated noise=0.795271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189311 Jy ! Component: 100 - total flux cleaned = -0.000222121 Jy ! Component: 150 - total flux cleaned = -0.000222442 Jy ! Component: 200 - total flux cleaned = -0.000222622 Jy ! Total flux subtracted in 200 components = -0.000222622 Jy ! Clean residual min=-0.004538 max=0.005040 Jy/beam ! Clean residual mean=0.000046 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.219243 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 149 components and 0.219243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060783Jy sigma=1.054280 ! Fit after self-cal, rms=0.060780Jy sigma=1.054211 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.519 mas, bmaj=6.658 mas, bpa=-3.4 degrees ! Estimated noise=0.999223 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115387 Jy ! Component: 100 - total flux cleaned = 0.153024 Jy ! Component: 150 - total flux cleaned = 0.175034 Jy ! Component: 200 - total flux cleaned = 0.189043 Jy ! Total flux subtracted in 200 components = 0.189043 Jy ! Clean residual min=-0.005309 max=0.005867 Jy/beam ! Clean residual mean=0.000028 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.189043 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.189043 Jy ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=8.007 mas, bpa=-3.876 degrees ! Estimated noise=0.62149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120995 Jy ! Component: 100 - total flux cleaned = 0.0188186 Jy ! Component: 150 - total flux cleaned = 0.0230445 Jy ! Component: 200 - total flux cleaned = 0.0258501 Jy ! Total flux subtracted in 200 components = 0.0258501 Jy ! Clean residual min=-0.004190 max=0.003901 Jy/beam ! Clean residual mean=0.000033 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.214893 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 79 components and 0.214893 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.825 mas, bmaj=13.71 mas, bpa=-0.131 degrees ! Estimated noise=0.795271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238759 Jy ! Component: 100 - total flux cleaned = 0.00301531 Jy ! Component: 150 - total flux cleaned = 0.00320906 Jy ! Component: 200 - total flux cleaned = 0.00337492 Jy ! Total flux subtracted in 200 components = 0.00337492 Jy ! Clean residual min=-0.004512 max=0.005048 Jy/beam ! Clean residual mean=0.000052 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.218268 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 0.218268 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=8.007 mas, bpa=-3.876 degrees ! Estimated noise=0.62149 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000486797 Jy ! Component: 100 - total flux cleaned = 0.000534591 Jy ! Component: 150 - total flux cleaned = 0.00061443 Jy ! Component: 200 - total flux cleaned = 0.000652182 Jy ! Total flux subtracted in 200 components = 0.000652182 Jy ! Clean residual min=-0.004363 max=0.003666 Jy/beam ! Clean residual mean=0.000022 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.21892 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.21892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060776Jy sigma=1.054308 ! Fit after self-cal, rms=0.060772Jy sigma=1.054055 wmodel J0150-0725_S_2005_06_01_yyk\_map.mod ! Writing 125 model components to file: J0150-0725_S_2005_06_01_yyk_map.mod wobs J0150-0725_S_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0150-0725_S_2005_06_01_yyk_uvs.fits wwins J0150-0725_S_2005_06_01_yyk\_map.win ! wwins: Wrote 3 windows to J0150-0725_S_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000776524 Jy ! Component: 100 - total flux cleaned = -0.00103499 Jy ! Component: 150 - total flux cleaned = -0.00125505 Jy ! Component: 200 - total flux cleaned = -0.00141152 Jy ! Component: 250 - total flux cleaned = -0.0012645 Jy ! Component: 300 - total flux cleaned = -0.00117212 Jy ! Component: 350 - total flux cleaned = -0.00108238 Jy ! Component: 400 - total flux cleaned = -0.000908852 Jy ! Component: 450 - total flux cleaned = -0.000867521 Jy ! Component: 500 - total flux cleaned = -0.000867138 Jy ! Component: 550 - total flux cleaned = -0.000866636 Jy ! Component: 600 - total flux cleaned = -0.000866178 Jy ! Component: 650 - total flux cleaned = -0.000941661 Jy ! Component: 700 - total flux cleaned = -0.00109081 Jy ! Component: 750 - total flux cleaned = -0.00116342 Jy ! Component: 800 - total flux cleaned = -0.00130604 Jy ! Component: 850 - total flux cleaned = -0.00137616 Jy ! Component: 900 - total flux cleaned = -0.00137731 Jy ! Component: 950 - total flux cleaned = -0.00164803 Jy ! Component: 1000 - total flux cleaned = -0.00171468 Jy ! Component: 1050 - total flux cleaned = -0.00184614 Jy ! Component: 1100 - total flux cleaned = -0.00194296 Jy ! Component: 1150 - total flux cleaned = -0.00210069 Jy ! Component: 1200 - total flux cleaned = -0.00206953 Jy ! Component: 1250 - total flux cleaned = -0.00213085 Jy ! Component: 1300 - total flux cleaned = -0.00222115 Jy ! Component: 1350 - total flux cleaned = -0.00222109 Jy ! Component: 1400 - total flux cleaned = -0.00227992 Jy ! Component: 1450 - total flux cleaned = -0.00230894 Jy ! Component: 1500 - total flux cleaned = -0.00242276 Jy ! Component: 1550 - total flux cleaned = -0.00236637 Jy ! Component: 1600 - total flux cleaned = -0.00242229 Jy ! Component: 1650 - total flux cleaned = -0.00244954 Jy ! Component: 1700 - total flux cleaned = -0.00255749 Jy ! Component: 1750 - total flux cleaned = -0.00253078 Jy ! Component: 1800 - total flux cleaned = -0.00253097 Jy ! Component: 1850 - total flux cleaned = -0.00255758 Jy ! Component: 1900 - total flux cleaned = -0.00258366 Jy ! Component: 1950 - total flux cleaned = -0.00266036 Jy ! Component: 2000 - total flux cleaned = -0.00273575 Jy ! Total flux subtracted in 2048 components = -0.00273539 Jy ! Clean residual min=-0.001352 max=0.001752 Jy/beam ! Clean residual mean=-0.000000 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.216185 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 269 components and 0.216185 Jy ![Exited script file: muppet] wmap "J0150-0725_S_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.178 x 8.007 at -3.876 degrees (North through East) ! Clean map min=-0.0034059 max=0.13084 Jy/beam ! Writing clean map to FITS file: J0150-0725_S_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000498019 device "J0150-0725_S_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0150-0725_S_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14191 1.14191 2.28381 4.56762 9.13525 18.2705 36.541 73.082 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.178 x 8.007 at -3.876 degrees (North through East) ! Clean map min=-0.0034059 max=0.13084 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0150-0725_S_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0150-0725_S_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0150-0725_S_2005_06_01_yyk_uvs.log closed on Sat Oct 8 16:49:37 2005