! Started logfile: J0121-2806_S_2005_05_12_yyk_uvs.log on Sat Oct 8 16:49:07 2005 obs J0121-2806_S_2005_05_12_yyk_uve.fits ! Reading UV FITS file: J0121-2806_S_2005_05_12_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.935185 visibilities/baseline/integration-bin. ! Found source: J0121-2806 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1443 lines of history. ! ! Reading 2020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0121-2806_S_2005_05_12_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.168938 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=6.52 mas, bpa=-0.9548 degrees ! Estimated noise=1.88371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0825978 Jy ! Component: 100 - total flux cleaned = 0.0980889 Jy ! Total flux subtracted in 100 components = 0.0980889 Jy ! Clean residual min=-0.011877 max=0.013287 Jy/beam ! Clean residual mean=-0.000070 rms=0.003277 Jy/beam ! Combined flux in latest and established models = 0.0980889 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0980889 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.138879Jy sigma=1.396864 ! Fit after self-cal, rms=0.136877Jy sigma=1.275885 ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=6.52 mas, bpa=-0.9548 degrees ! Estimated noise=1.88371 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.14 mas, bpa=-6.285 degrees ! Estimated noise=1.13716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197147 Jy ! Component: 100 - total flux cleaned = 0.0269048 Jy ! Component: 150 - total flux cleaned = 0.0299726 Jy ! Component: 200 - total flux cleaned = 0.0303904 Jy ! Total flux subtracted in 200 components = 0.0303904 Jy ! Clean residual min=-0.009798 max=0.013494 Jy/beam ! Clean residual mean=-0.000183 rms=0.002799 Jy/beam ! Combined flux in latest and established models = 0.128479 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.128479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136791Jy sigma=1.235060 ! Fit after self-cal, rms=0.136613Jy sigma=1.234662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 8.14 at -6.285 degrees (North through East) ! Clean map min=-0.0093241 max=0.097603 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.136613Jy sigma=1.234662 ! Fit after self-cal, rms=0.136613Jy sigma=1.234662 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136613Jy sigma=1.234662 ! Fit after self-cal, rms=0.136593Jy sigma=1.234494 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.14 mas, bpa=-6.285 degrees ! Estimated noise=1.13716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770408 Jy ! Component: 100 - total flux cleaned = 0.000779788 Jy ! Component: 150 - total flux cleaned = 0.000840775 Jy ! Component: 200 - total flux cleaned = 0.000891112 Jy ! Total flux subtracted in 200 components = 0.000891112 Jy ! Clean residual min=-0.009717 max=0.013482 Jy/beam ! Clean residual mean=-0.000181 rms=0.002801 Jy/beam ! Combined flux in latest and established models = 0.12937 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.12937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136586Jy sigma=1.233281 ! Fit after self-cal, rms=0.136516Jy sigma=1.232935 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136516Jy sigma=1.232935 ! Fit after self-cal, rms=0.129803Jy sigma=1.123009 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 2.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013889 Jy ! Component: 100 - total flux cleaned = 0.0202757 Jy ! Component: 150 - total flux cleaned = 0.0235249 Jy ! Component: 200 - total flux cleaned = 0.0241009 Jy ! Total flux subtracted in 200 components = 0.0241009 Jy ! Clean residual min=-0.007386 max=0.005669 Jy/beam ! Clean residual mean=-0.000209 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.153471 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 53 components and 0.153471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129208Jy sigma=1.097377 ! Fit after self-cal, rms=0.128679Jy sigma=1.086985 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 8.14 at -6.285 degrees (North through East) ! Clean map min=-0.006376 max=0.10327 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128679Jy sigma=1.086985 ! Fit after self-cal, rms=0.128679Jy sigma=1.086985 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128679Jy sigma=1.086985 ! Fit after self-cal, rms=0.128658Jy sigma=1.085797 ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.14 mas, bpa=-6.285 degrees ! Estimated noise=1.13716 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420582 Jy ! Component: 100 - total flux cleaned = 0.00462891 Jy ! Component: 150 - total flux cleaned = 0.00490353 Jy ! Component: 200 - total flux cleaned = 0.00515236 Jy ! Total flux subtracted in 200 components = 0.00515236 Jy ! Clean residual min=-0.006455 max=0.006028 Jy/beam ! Clean residual mean=-0.000205 rms=0.001722 Jy/beam ! Combined flux in latest and established models = 0.158624 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 0.158624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128453Jy sigma=1.082398 ! Fit after self-cal, rms=0.128539Jy sigma=1.081747 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128539Jy sigma=1.081747 ! Fit after self-cal, rms=0.128539Jy sigma=1.081747 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128539Jy sigma=1.081747 ! Fit after self-cal, rms=0.128580Jy sigma=1.081694 ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.14 mas, bpa=-6.285 degrees ! Estimated noise=1.13716 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113881 Jy ! Component: 100 - total flux cleaned = 0.00129997 Jy ! Component: 150 - total flux cleaned = 0.00129851 Jy ! Component: 200 - total flux cleaned = 0.00136333 Jy ! Total flux subtracted in 200 components = 0.00136333 Jy ! Clean residual min=-0.006479 max=0.006211 Jy/beam ! Clean residual mean=-0.000204 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.159987 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.159987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128436Jy sigma=1.080158 ! Fit after self-cal, rms=0.128490Jy sigma=1.080010 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.361 mas, bmaj=20.75 mas, bpa=3.141 degrees ! Estimated noise=1.50391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316524 Jy ! Component: 100 - total flux cleaned = 0.000450167 Jy ! Component: 150 - total flux cleaned = 0.000555996 Jy ! Component: 200 - total flux cleaned = 0.000512251 Jy ! Total flux subtracted in 200 components = 0.000512251 Jy ! Clean residual min=-0.008128 max=0.006007 Jy/beam ! Clean residual mean=-0.000408 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 0.160499 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 93 components and 0.160499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128480Jy sigma=1.080119 ! Fit after self-cal, rms=0.128303Jy sigma=1.079847 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=6.52 mas, bpa=-0.9548 degrees ! Estimated noise=1.88371 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.094626 Jy ! Component: 100 - total flux cleaned = 0.115507 Jy ! Component: 150 - total flux cleaned = 0.129174 Jy ! Component: 200 - total flux cleaned = 0.138812 Jy ! Total flux subtracted in 200 components = 0.138812 Jy ! Clean residual min=-0.010263 max=0.009137 Jy/beam ! Clean residual mean=-0.000078 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 0.138812 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.138812 Jy ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.14 mas, bpa=-6.285 degrees ! Estimated noise=1.13716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106574 Jy ! Component: 100 - total flux cleaned = 0.0157698 Jy ! Component: 150 - total flux cleaned = 0.0187069 Jy ! Component: 200 - total flux cleaned = 0.0192513 Jy ! Total flux subtracted in 200 components = 0.0192513 Jy ! Clean residual min=-0.006543 max=0.006075 Jy/beam ! Clean residual mean=-0.000211 rms=0.001713 Jy/beam ! Combined flux in latest and established models = 0.158063 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 56 components and 0.158063 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.361 mas, bmaj=20.75 mas, bpa=3.141 degrees ! Estimated noise=1.50391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177489 Jy ! Component: 100 - total flux cleaned = 0.00177792 Jy ! Component: 150 - total flux cleaned = 0.00177652 Jy ! Component: 200 - total flux cleaned = 0.00177585 Jy ! Total flux subtracted in 200 components = 0.00177585 Jy ! Clean residual min=-0.008149 max=0.005993 Jy/beam ! Clean residual mean=-0.000415 rms=0.002513 Jy/beam ! Combined flux in latest and established models = 0.159839 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.159839 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=8.14 mas, bpa=-6.285 degrees ! Estimated noise=1.13716 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106549 Jy ! Component: 100 - total flux cleaned = -0.0011416 Jy ! Component: 150 - total flux cleaned = -0.00114175 Jy ! Component: 200 - total flux cleaned = -0.00114403 Jy ! Total flux subtracted in 200 components = -0.00114403 Jy ! Clean residual min=-0.006555 max=0.006303 Jy/beam ! Clean residual mean=-0.000210 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 0.158695 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.158695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128444Jy sigma=1.078942 ! Fit after self-cal, rms=0.129188Jy sigma=1.078528 wmodel J0121-2806_S_2005_05_12_yyk\_map.mod ! Writing 79 model components to file: J0121-2806_S_2005_05_12_yyk_map.mod wobs J0121-2806_S_2005_05_12_yyk\_uvs.fits ! Writing UV FITS file: J0121-2806_S_2005_05_12_yyk_uvs.fits wwins J0121-2806_S_2005_05_12_yyk\_map.win ! wwins: Wrote 2 windows to J0121-2806_S_2005_05_12_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102119 Jy ! Component: 100 - total flux cleaned = -0.00237552 Jy ! Component: 150 - total flux cleaned = -0.00307875 Jy ! Component: 200 - total flux cleaned = -0.00407045 Jy ! Component: 250 - total flux cleaned = -0.00500685 Jy ! Component: 300 - total flux cleaned = -0.0058192 Jy ! Component: 350 - total flux cleaned = -0.00645424 Jy ! Component: 400 - total flux cleaned = -0.00679319 Jy ! Component: 450 - total flux cleaned = -0.00712089 Jy ! Component: 500 - total flux cleaned = -0.00712281 Jy ! Component: 550 - total flux cleaned = -0.00712274 Jy ! Component: 600 - total flux cleaned = -0.00682348 Jy ! Component: 650 - total flux cleaned = -0.00682395 Jy ! Component: 700 - total flux cleaned = -0.00653672 Jy ! Component: 750 - total flux cleaned = -0.00636986 Jy ! Component: 800 - total flux cleaned = -0.00626023 Jy ! Component: 850 - total flux cleaned = -0.00625978 Jy ! Component: 900 - total flux cleaned = -0.00604539 Jy ! Component: 950 - total flux cleaned = -0.00604445 Jy ! Component: 1000 - total flux cleaned = -0.00588923 Jy ! Component: 1050 - total flux cleaned = -0.00558589 Jy ! Component: 1100 - total flux cleaned = -0.00573557 Jy ! Component: 1150 - total flux cleaned = -0.00548942 Jy ! Component: 1200 - total flux cleaned = -0.00539357 Jy ! Component: 1250 - total flux cleaned = -0.00539437 Jy ! Component: 1300 - total flux cleaned = -0.00520479 Jy ! Component: 1350 - total flux cleaned = -0.00525158 Jy ! Component: 1400 - total flux cleaned = -0.00506637 Jy ! Component: 1450 - total flux cleaned = -0.00492909 Jy ! Component: 1500 - total flux cleaned = -0.00474931 Jy ! Component: 1550 - total flux cleaned = -0.00457155 Jy ! Component: 1600 - total flux cleaned = -0.00457194 Jy ! Component: 1650 - total flux cleaned = -0.00435488 Jy ! Component: 1700 - total flux cleaned = -0.00439794 Jy ! Component: 1750 - total flux cleaned = -0.00426985 Jy ! Component: 1800 - total flux cleaned = -0.00414346 Jy ! Component: 1850 - total flux cleaned = -0.00401874 Jy ! Component: 1900 - total flux cleaned = -0.00401912 Jy ! Component: 1950 - total flux cleaned = -0.00381469 Jy ! Component: 2000 - total flux cleaned = -0.00361249 Jy ! Total flux subtracted in 2048 components = -0.00353209 Jy ! Clean residual min=-0.002238 max=0.002816 Jy/beam ! Clean residual mean=-0.000073 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.155163 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 229 components and 0.155163 Jy ![Exited script file: muppet] wmap "J0121-2806_S_2005_05_12_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 8.14 at -6.285 degrees (North through East) ! Clean map min=-0.0041892 max=0.10954 Jy/beam ! Writing clean map to FITS file: J0121-2806_S_2005_05_12_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10954 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000826849 device "J0121-2806_S_2005_05_12_yyk\_map.eps/VPS" ! Attempting to open device: 'J0121-2806_S_2005_05_12_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.26451 2.26451 4.52902 9.05803 18.1161 36.2321 72.4642 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.984 x 8.14 at -6.285 degrees (North through East) ! Clean map min=-0.0041892 max=0.10954 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0121-2806_S_2005_05_12_yyk\_map.gif/gif" ! Attempting to open device: 'J0121-2806_S_2005_05_12_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0121-2806_S_2005_05_12_yyk_uvs.log closed on Sat Oct 8 16:49:11 2005