! Started logfile: J0055-1217_X_2005_06_30_yyk_uvs.log on Sat Oct 8 16:47:27 2005 obs J0055-1217_X_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0055-1217_X_2005_06_30_yyk_uve.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959064 visibilities/baseline/integration-bin. ! Found source: J0055-1217 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1460 lines of history. ! ! Reading 3280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0055-1217_X_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.211291 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6563 mas, bmaj=1.767 mas, bpa=-2.637 degrees ! Estimated noise=0.972831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.1679 Jy ! Component: 100 - total flux cleaned = 0.197592 Jy ! Total flux subtracted in 100 components = 0.197592 Jy ! Clean residual min=-0.005701 max=0.008646 Jy/beam ! Clean residual mean=-0.000007 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.197592 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.197592 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.062300Jy sigma=1.144507 ! Fit after self-cal, rms=0.062220Jy sigma=1.142525 ! Inverting map and beam ! Estimated beam: bmin=0.6563 mas, bmaj=1.767 mas, bpa=-2.637 degrees ! Estimated noise=0.972831 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=2.143 mas, bpa=-1.656 degrees ! Estimated noise=0.617632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182976 Jy ! Component: 100 - total flux cleaned = 0.0269296 Jy ! Component: 150 - total flux cleaned = 0.0318115 Jy ! Component: 200 - total flux cleaned = 0.0339125 Jy ! Total flux subtracted in 200 components = 0.0339125 Jy ! Clean residual min=-0.003256 max=0.003718 Jy/beam ! Clean residual mean=-0.000003 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.231505 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 44 components and 0.231505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058714Jy sigma=1.058813 ! Fit after self-cal, rms=0.058650Jy sigma=1.057604 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8688 x 2.143 at -1.656 degrees (North through East) ! Clean map min=-0.0030625 max=0.19726 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00408 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.04 KP 0.95 ! LA 1.02 MK 1.01 NL 1.00 OV 1.03 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01831 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.01 KP 0.92 ! LA 0.97 MK 0.97 NL 1.01 OV 1.01 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02108 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.92 KP 0.86 ! LA 1.01 MK 1.02 NL 0.96 OV 1.02 ! PT 1.03 SC 0.92 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.058650Jy sigma=1.057604 ! Fit after self-cal, rms=0.057477Jy sigma=1.039315 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057477Jy sigma=1.039315 ! Fit after self-cal, rms=0.057474Jy sigma=1.039306 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8682 mas, bmaj=2.137 mas, bpa=-1.043 degrees ! Estimated noise=0.617096 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214391 Jy ! Component: 100 - total flux cleaned = 0.0024857 Jy ! Component: 150 - total flux cleaned = 0.00266533 Jy ! Component: 200 - total flux cleaned = 0.00270289 Jy ! Total flux subtracted in 200 components = 0.00270289 Jy ! Clean residual min=-0.002610 max=0.003044 Jy/beam ! Clean residual mean=-0.000001 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.234208 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.234208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057371Jy sigma=1.037226 ! Fit after self-cal, rms=0.057358Jy sigma=1.037119 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057358Jy sigma=1.037119 ! Fit after self-cal, rms=0.055131Jy sigma=0.995426 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568795 Jy ! Component: 100 - total flux cleaned = 0.000533257 Jy ! Component: 150 - total flux cleaned = 0.000533725 Jy ! Component: 200 - total flux cleaned = 0.000534563 Jy ! Total flux subtracted in 200 components = 0.000534563 Jy ! Clean residual min=-0.002546 max=0.003003 Jy/beam ! Clean residual mean=-0.000001 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.234742 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.234742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055098Jy sigma=0.994754 ! Fit after self-cal, rms=0.054981Jy sigma=0.992155 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8682 x 2.137 at -1.043 degrees (North through East) ! Clean map min=-0.0025127 max=0.19772 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054981Jy sigma=0.992155 ! Fit after self-cal, rms=0.053676Jy sigma=0.975922 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053676Jy sigma=0.975922 ! Fit after self-cal, rms=0.053678Jy sigma=0.975607 ! Inverting map and beam ! Estimated beam: bmin=0.8651 mas, bmaj=2.123 mas, bpa=-0.8606 degrees ! Estimated noise=0.609005 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161668 Jy ! Component: 100 - total flux cleaned = -0.00176315 Jy ! Component: 150 - total flux cleaned = -0.00182379 Jy ! Component: 200 - total flux cleaned = -0.00185145 Jy ! Total flux subtracted in 200 components = -0.00185145 Jy ! Clean residual min=-0.002392 max=0.002698 Jy/beam ! Clean residual mean=-0.000004 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.232891 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.232891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053608Jy sigma=0.974276 ! Fit after self-cal, rms=0.053613Jy sigma=0.974200 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053613Jy sigma=0.974200 ! Fit after self-cal, rms=0.052792Jy sigma=0.946557 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052792Jy sigma=0.946557 ! Fit after self-cal, rms=0.052795Jy sigma=0.946501 ! Inverting map and beam ! Estimated beam: bmin=0.8663 mas, bmaj=2.123 mas, bpa=-0.8913 degrees ! Estimated noise=0.607861 mJy/beam. ! Added new window around map position (3.6, -4.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278371 Jy ! Component: 100 - total flux cleaned = 0.00377803 Jy ! Component: 150 - total flux cleaned = 0.0038558 Jy ! Component: 200 - total flux cleaned = 0.00392407 Jy ! Total flux subtracted in 200 components = 0.00392407 Jy ! Clean residual min=-0.001940 max=0.002020 Jy/beam ! Clean residual mean=-0.000000 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.236815 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 103 components and 0.236815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052673Jy sigma=0.943936 ! Fit after self-cal, rms=0.052663Jy sigma=0.943713 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.218 mas, bmaj=4.169 mas, bpa=2.039 degrees ! Estimated noise=0.788529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017895 Jy ! Component: 100 - total flux cleaned = -1.17933e-05 Jy ! Component: 150 - total flux cleaned = 8.95309e-05 Jy ! Component: 200 - total flux cleaned = 0.000173938 Jy ! Total flux subtracted in 200 components = 0.000173938 Jy ! Clean residual min=-0.001952 max=0.002223 Jy/beam ! Clean residual mean=-0.000001 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.236989 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 0.236989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052647Jy sigma=0.943544 ! Fit after self-cal, rms=0.052641Jy sigma=0.943457 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6561 mas, bmaj=1.759 mas, bpa=-2.149 degrees ! Estimated noise=0.956231 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.16567 Jy ! Component: 100 - total flux cleaned = 0.196515 Jy ! Component: 150 - total flux cleaned = 0.208786 Jy ! Component: 200 - total flux cleaned = 0.216354 Jy ! Total flux subtracted in 200 components = 0.216354 Jy ! Clean residual min=-0.003408 max=0.003464 Jy/beam ! Clean residual mean=-0.000002 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.216353 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.216353 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8663 mas, bmaj=2.123 mas, bpa=-0.8913 degrees ! Estimated noise=0.607861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00824979 Jy ! Component: 100 - total flux cleaned = 0.0128851 Jy ! Component: 150 - total flux cleaned = 0.0159313 Jy ! Component: 200 - total flux cleaned = 0.0180212 Jy ! Total flux subtracted in 200 components = 0.0180212 Jy ! Clean residual min=-0.002103 max=0.002022 Jy/beam ! Clean residual mean=-0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.234375 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 58 components and 0.234375 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.218 mas, bmaj=4.169 mas, bpa=2.039 degrees ! Estimated noise=0.788529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140196 Jy ! Component: 100 - total flux cleaned = 0.00190115 Jy ! Component: 150 - total flux cleaned = 0.00231503 Jy ! Component: 200 - total flux cleaned = 0.00256805 Jy ! Total flux subtracted in 200 components = 0.00256805 Jy ! Clean residual min=-0.002051 max=0.002155 Jy/beam ! Clean residual mean=-0.000001 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.236943 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.236943 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8663 mas, bmaj=2.123 mas, bpa=-0.8913 degrees ! Estimated noise=0.607861 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378034 Jy ! Component: 100 - total flux cleaned = -0.000119911 Jy ! Component: 150 - total flux cleaned = -4.47651e-05 Jy ! Component: 200 - total flux cleaned = 1.9893e-05 Jy ! Total flux subtracted in 200 components = 1.9893e-05 Jy ! Clean residual min=-0.002023 max=0.001946 Jy/beam ! Clean residual mean=0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.236963 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.236963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052653Jy sigma=0.943494 ! Fit after self-cal, rms=0.052642Jy sigma=0.943247 wmodel J0055-1217_X_2005_06_30_yyk\_map.mod ! Writing 98 model components to file: J0055-1217_X_2005_06_30_yyk_map.mod wobs J0055-1217_X_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0055-1217_X_2005_06_30_yyk_uvs.fits wwins J0055-1217_X_2005_06_30_yyk\_map.win ! wwins: Wrote 3 windows to J0055-1217_X_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195414 Jy ! Component: 100 - total flux cleaned = -0.000260907 Jy ! Component: 150 - total flux cleaned = -0.000355942 Jy ! Component: 200 - total flux cleaned = -0.00044775 Jy ! Component: 250 - total flux cleaned = -0.000417989 Jy ! Component: 300 - total flux cleaned = -0.000360209 Jy ! Component: 350 - total flux cleaned = -0.000415648 Jy ! Component: 400 - total flux cleaned = -0.00033435 Jy ! Component: 450 - total flux cleaned = -0.000254937 Jy ! Component: 500 - total flux cleaned = -0.000281006 Jy ! Component: 550 - total flux cleaned = -0.000281243 Jy ! Component: 600 - total flux cleaned = -0.00028164 Jy ! Component: 650 - total flux cleaned = -0.000379905 Jy ! Component: 700 - total flux cleaned = -0.000427996 Jy ! Component: 750 - total flux cleaned = -0.000451667 Jy ! Component: 800 - total flux cleaned = -0.000428651 Jy ! Component: 850 - total flux cleaned = -0.000405905 Jy ! Component: 900 - total flux cleaned = -0.000405714 Jy ! Component: 950 - total flux cleaned = -0.000339083 Jy ! Component: 1000 - total flux cleaned = -0.000273877 Jy ! Component: 1050 - total flux cleaned = -0.000210043 Jy ! Component: 1100 - total flux cleaned = -0.000252046 Jy ! Component: 1150 - total flux cleaned = -0.000210285 Jy ! Component: 1200 - total flux cleaned = -0.000168783 Jy ! Component: 1250 - total flux cleaned = -2.74091e-05 Jy ! Component: 1300 - total flux cleaned = 7.17882e-05 Jy ! Component: 1350 - total flux cleaned = 0.000170001 Jy ! Component: 1400 - total flux cleaned = 0.00024744 Jy ! Component: 1450 - total flux cleaned = 0.000324234 Jy ! Component: 1500 - total flux cleaned = 0.000381039 Jy ! Component: 1550 - total flux cleaned = 0.000474737 Jy ! Component: 1600 - total flux cleaned = 0.000437774 Jy ! Component: 1650 - total flux cleaned = 0.000529194 Jy ! Component: 1700 - total flux cleaned = 0.000511262 Jy ! Component: 1750 - total flux cleaned = 0.000547358 Jy ! Component: 1800 - total flux cleaned = 0.000689003 Jy ! Component: 1850 - total flux cleaned = 0.000636301 Jy ! Component: 1900 - total flux cleaned = 0.000706048 Jy ! Component: 1950 - total flux cleaned = 0.000723473 Jy ! Component: 2000 - total flux cleaned = 0.000791419 Jy ! Total flux subtracted in 2048 components = 0.000842064 Jy ! Clean residual min=-0.000935 max=0.001105 Jy/beam ! Clean residual mean=0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.237805 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 231 components and 0.237805 Jy ![Exited script file: muppet] wmap "J0055-1217_X_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8663 x 2.123 at -0.8913 degrees (North through East) ! Clean map min=-0.0015571 max=0.19429 Jy/beam ! Writing clean map to FITS file: J0055-1217_X_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.194287 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000312179 device "J0055-1217_X_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0055-1217_X_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.482037 0.482037 0.964074 1.92815 3.85629 7.71259 15.4252 30.8504 61.7007 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.194 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8663 x 2.123 at -0.8913 degrees (North through East) ! Clean map min=-0.0015571 max=0.19429 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0055-1217_X_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0055-1217_X_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0055-1217_X_2005_06_30_yyk_uvs.log closed on Sat Oct 8 16:47:31 2005