! Started logfile: J0055-1217_S_2005_06_30_yyk_uvs.log on Sat Oct 8 16:47:22 2005 obs J0055-1217_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0055-1217_S_2005_06_30_yyk_uve.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959064 visibilities/baseline/integration-bin. ! Found source: J0055-1217 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1469 lines of history. ! ! Reading 3280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0055-1217_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.188321 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.556 mas, bpa=-4.175 degrees ! Estimated noise=1.01604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.146411 Jy ! Component: 100 - total flux cleaned = 0.172512 Jy ! Total flux subtracted in 100 components = 0.172512 Jy ! Clean residual min=-0.006232 max=0.007970 Jy/beam ! Clean residual mean=0.000117 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.172512 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.172512 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.067385Jy sigma=1.159342 ! Fit after self-cal, rms=0.067214Jy sigma=1.156558 ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.556 mas, bpa=-4.175 degrees ! Estimated noise=1.01604 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=7.914 mas, bpa=-4.118 degrees ! Estimated noise=0.647981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.012298 Jy ! Component: 100 - total flux cleaned = 0.0177313 Jy ! Component: 150 - total flux cleaned = 0.0198564 Jy ! Component: 200 - total flux cleaned = 0.0203291 Jy ! Total flux subtracted in 200 components = 0.0203291 Jy ! Clean residual min=-0.004924 max=0.007468 Jy/beam ! Clean residual mean=0.000140 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.192841 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 38 components and 0.192841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065097Jy sigma=1.124566 ! Fit after self-cal, rms=0.065063Jy sigma=1.124216 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.176 x 7.914 at -4.118 degrees (North through East) ! Clean map min=-0.0047039 max=0.16673 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0029 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.07 KP 0.97 ! LA 1.01 MK 0.92 NL 0.94 OV 1.02 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993584 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.06 KP 1.02 ! LA 0.98 MK 0.98 NL 0.98 OV 1.01 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.065063Jy sigma=1.124216 ! Fit after self-cal, rms=0.064768Jy sigma=1.117207 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064768Jy sigma=1.117207 ! Fit after self-cal, rms=0.064768Jy sigma=1.117194 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=7.794 mas, bpa=-3.961 degrees ! Estimated noise=0.648362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286634 Jy ! Component: 100 - total flux cleaned = 0.00325759 Jy ! Component: 150 - total flux cleaned = 0.00362035 Jy ! Component: 200 - total flux cleaned = 0.00396429 Jy ! Total flux subtracted in 200 components = 0.00396429 Jy ! Clean residual min=-0.004339 max=0.006865 Jy/beam ! Clean residual mean=0.000144 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.196805 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.196805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064553Jy sigma=1.114052 ! Fit after self-cal, rms=0.064534Jy sigma=1.113896 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064534Jy sigma=1.113896 ! Fit after self-cal, rms=0.062812Jy sigma=1.080011 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114107 Jy ! Component: 100 - total flux cleaned = 0.0012366 Jy ! Component: 150 - total flux cleaned = 0.00131887 Jy ! Component: 200 - total flux cleaned = 0.0013962 Jy ! Total flux subtracted in 200 components = 0.0013962 Jy ! Clean residual min=-0.004302 max=0.006601 Jy/beam ! Clean residual mean=0.000142 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.198201 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.198201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062764Jy sigma=1.079425 ! Fit after self-cal, rms=0.062657Jy sigma=1.077406 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.123 x 7.794 at -3.961 degrees (North through East) ! Clean map min=-0.0041811 max=0.16594 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062657Jy sigma=1.077406 ! Fit after self-cal, rms=0.062551Jy sigma=1.068104 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062551Jy sigma=1.068104 ! Fit after self-cal, rms=0.062545Jy sigma=1.067873 ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=7.709 mas, bpa=-3.816 degrees ! Estimated noise=0.652129 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268147 Jy ! Component: 100 - total flux cleaned = 0.00388048 Jy ! Component: 150 - total flux cleaned = 0.00414315 Jy ! Component: 200 - total flux cleaned = 0.00431111 Jy ! Total flux subtracted in 200 components = 0.00431111 Jy ! Clean residual min=-0.003962 max=0.006363 Jy/beam ! Clean residual mean=0.000139 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.202512 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.202512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062338Jy sigma=1.066199 ! Fit after self-cal, rms=0.062333Jy sigma=1.066116 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062333Jy sigma=1.066116 ! Fit after self-cal, rms=0.061979Jy sigma=1.052228 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061979Jy sigma=1.052228 ! Fit after self-cal, rms=0.061990Jy sigma=1.052190 ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=7.639 mas, bpa=-3.763 degrees ! Estimated noise=0.65462 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204928 Jy ! Component: 100 - total flux cleaned = 0.00294366 Jy ! Component: 150 - total flux cleaned = 0.00311802 Jy ! Component: 200 - total flux cleaned = 0.00317472 Jy ! Total flux subtracted in 200 components = 0.00317472 Jy ! Clean residual min=-0.004045 max=0.006358 Jy/beam ! Clean residual mean=0.000140 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.205687 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.205687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061850Jy sigma=1.051216 ! Fit after self-cal, rms=0.061849Jy sigma=1.051178 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.716 mas, bmaj=14.35 mas, bpa=2.385 degrees ! Estimated noise=0.858565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224112 Jy ! Component: 100 - total flux cleaned = 0.00222563 Jy ! Component: 150 - total flux cleaned = 0.00222125 Jy ! Component: 200 - total flux cleaned = 0.0022191 Jy ! Total flux subtracted in 200 components = 0.0022191 Jy ! Clean residual min=-0.005582 max=0.009482 Jy/beam ! Clean residual mean=0.000287 rms=0.002659 Jy/beam ! Combined flux in latest and established models = 0.207906 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.207906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062068Jy sigma=1.054821 ! Fit after self-cal, rms=0.061928Jy sigma=1.052884 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=6.467 mas, bpa=-3.965 degrees ! Estimated noise=1.01106 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.146402 Jy ! Component: 100 - total flux cleaned = 0.175652 Jy ! Component: 150 - total flux cleaned = 0.188671 Jy ! Component: 200 - total flux cleaned = 0.195448 Jy ! Total flux subtracted in 200 components = 0.195448 Jy ! Clean residual min=-0.006075 max=0.005499 Jy/beam ! Clean residual mean=0.000099 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.195448 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.195448 Jy ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=7.639 mas, bpa=-3.763 degrees ! Estimated noise=0.65462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -2.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00945633 Jy ! Component: 100 - total flux cleaned = 0.0135261 Jy ! Component: 150 - total flux cleaned = 0.0151547 Jy ! Component: 200 - total flux cleaned = 0.016442 Jy ! Total flux subtracted in 200 components = 0.016442 Jy ! Clean residual min=-0.003910 max=0.004785 Jy/beam ! Clean residual mean=0.000115 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.21189 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 63 components and 0.21189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.716 mas, bmaj=14.35 mas, bpa=2.385 degrees ! Estimated noise=0.858565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288896 Jy ! Component: 100 - total flux cleaned = 0.00330839 Jy ! Component: 150 - total flux cleaned = 0.003494 Jy ! Component: 200 - total flux cleaned = 0.00353452 Jy ! Total flux subtracted in 200 components = 0.00353452 Jy ! Clean residual min=-0.005721 max=0.007630 Jy/beam ! Clean residual mean=0.000222 rms=0.002254 Jy/beam ! Combined flux in latest and established models = 0.215424 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.215424 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=7.639 mas, bpa=-3.763 degrees ! Estimated noise=0.65462 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000963763 Jy ! Component: 100 - total flux cleaned = -0.000960084 Jy ! Component: 150 - total flux cleaned = -0.000958066 Jy ! Component: 200 - total flux cleaned = -0.000995764 Jy ! Total flux subtracted in 200 components = -0.000995764 Jy ! Clean residual min=-0.003881 max=0.004668 Jy/beam ! Clean residual mean=0.000106 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.214428 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.214428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061247Jy sigma=1.038350 ! Fit after self-cal, rms=0.061175Jy sigma=1.037000 wmodel J0055-1217_S_2005_06_30_yyk\_map.mod ! Writing 95 model components to file: J0055-1217_S_2005_06_30_yyk_map.mod wobs J0055-1217_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0055-1217_S_2005_06_30_yyk_uvs.fits wwins J0055-1217_S_2005_06_30_yyk\_map.win ! wwins: Wrote 2 windows to J0055-1217_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198084 Jy ! Component: 100 - total flux cleaned = 0.00304411 Jy ! Component: 150 - total flux cleaned = 0.00388799 Jy ! Component: 200 - total flux cleaned = 0.0045604 Jy ! Component: 250 - total flux cleaned = 0.00502206 Jy ! Component: 300 - total flux cleaned = 0.00546071 Jy ! Component: 350 - total flux cleaned = 0.00577659 Jy ! Component: 400 - total flux cleaned = 0.00608012 Jy ! Component: 450 - total flux cleaned = 0.00632305 Jy ! Component: 500 - total flux cleaned = 0.00637057 Jy ! Component: 550 - total flux cleaned = 0.00655505 Jy ! Component: 600 - total flux cleaned = 0.00664482 Jy ! Component: 650 - total flux cleaned = 0.0067308 Jy ! Component: 700 - total flux cleaned = 0.00673105 Jy ! Component: 750 - total flux cleaned = 0.00660882 Jy ! Component: 800 - total flux cleaned = 0.00664968 Jy ! Component: 850 - total flux cleaned = 0.00668932 Jy ! Component: 900 - total flux cleaned = 0.00672798 Jy ! Component: 950 - total flux cleaned = 0.00687805 Jy ! Component: 1000 - total flux cleaned = 0.00702517 Jy ! Component: 1050 - total flux cleaned = 0.00713313 Jy ! Component: 1100 - total flux cleaned = 0.00723942 Jy ! Component: 1150 - total flux cleaned = 0.00730924 Jy ! Component: 1200 - total flux cleaned = 0.00741114 Jy ! Component: 1250 - total flux cleaned = 0.00741119 Jy ! Component: 1300 - total flux cleaned = 0.00747698 Jy ! Component: 1350 - total flux cleaned = 0.00744464 Jy ! Component: 1400 - total flux cleaned = 0.00747615 Jy ! Component: 1450 - total flux cleaned = 0.00753821 Jy ! Component: 1500 - total flux cleaned = 0.00756832 Jy ! Component: 1550 - total flux cleaned = 0.00753775 Jy ! Component: 1600 - total flux cleaned = 0.00762731 Jy ! Component: 1650 - total flux cleaned = 0.00762768 Jy ! Component: 1700 - total flux cleaned = 0.00765722 Jy ! Component: 1750 - total flux cleaned = 0.00771445 Jy ! Component: 1800 - total flux cleaned = 0.00765866 Jy ! Component: 1850 - total flux cleaned = 0.00771419 Jy ! Component: 1900 - total flux cleaned = 0.00771405 Jy ! Component: 1950 - total flux cleaned = 0.00768758 Jy ! Component: 2000 - total flux cleaned = 0.00763463 Jy ! Total flux subtracted in 2048 components = 0.00768664 Jy ! Clean residual min=-0.001797 max=0.001526 Jy/beam ! Clean residual mean=0.000040 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.222115 Jy keep ! Adding 169 model components to the UV plane model. ! The established model now contains 264 components and 0.222115 Jy ![Exited script file: muppet] wmap "J0055-1217_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 7.639 at -3.763 degrees (North through East) ! Clean map min=-0.0028505 max=0.16956 Jy/beam ! Writing clean map to FITS file: J0055-1217_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.169556 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000570069 device "J0055-1217_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0055-1217_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00864 1.00864 2.01728 4.03456 8.06912 16.1382 32.2765 64.5529 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.169 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 7.639 at -3.763 degrees (North through East) ! Clean map min=-0.0028505 max=0.16956 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0055-1217_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0055-1217_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0055-1217_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 16:47:27 2005