! Started logfile: J0050-0929_X_2005_06_30_yyk_uvs.log on Sat Oct 8 16:47:09 2005 obs J0050-0929_X_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0050-0929_X_2005_06_30_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.940741 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1459 lines of history. ! ! Reading 1524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0050-0929_X_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.605008 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7156 mas, bmaj=1.797 mas, bpa=-5.092 degrees ! Estimated noise=1.34329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.51259 Jy ! Component: 100 - total flux cleaned = 0.583288 Jy ! Total flux subtracted in 100 components = 0.583288 Jy ! Clean residual min=-0.011199 max=0.016394 Jy/beam ! Clean residual mean=0.000005 rms=0.003319 Jy/beam ! Combined flux in latest and established models = 0.583288 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.583288 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.088267Jy sigma=1.436165 ! Fit after self-cal, rms=0.088126Jy sigma=1.432603 ! Inverting map and beam ! Estimated beam: bmin=0.7156 mas, bmaj=1.797 mas, bpa=-5.092 degrees ! Estimated noise=1.34329 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8988 mas, bmaj=2.178 mas, bpa=-4.123 degrees ! Estimated noise=1.00313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286453 Jy ! Component: 100 - total flux cleaned = 0.0391311 Jy ! Component: 150 - total flux cleaned = 0.0428333 Jy ! Component: 200 - total flux cleaned = 0.0432879 Jy ! Total flux subtracted in 200 components = 0.0432879 Jy ! Clean residual min=-0.009562 max=0.008502 Jy/beam ! Clean residual mean=0.000017 rms=0.002339 Jy/beam ! Combined flux in latest and established models = 0.626576 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.626576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082231Jy sigma=1.310800 ! Fit after self-cal, rms=0.082209Jy sigma=1.310541 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8988 x 2.178 at -4.123 degrees (North through East) ! Clean map min=-0.0090715 max=0.59685 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01071 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.02 KP 0.97 ! LA 1.01 MK 0.99 NL 1.01 OV 1.02 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01871 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.02 KP 0.92 ! LA 0.99 MK 0.99 NL 0.98 OV 0.99 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01078 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.93 KP 0.87 ! LA 1.00 MK 1.04 NL 0.97 OV 1.03 ! PT 1.07 SC 0.92 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.951396 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.98 KP 1.00 ! LA 1.00 MK 1.05 NL 1.01 OV 1.03 ! PT 1.10 SC 1.25 ! ! ! Fit before self-cal, rms=0.082209Jy sigma=1.310541 ! Fit after self-cal, rms=0.074761Jy sigma=1.158095 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074761Jy sigma=1.158095 ! Fit after self-cal, rms=0.074758Jy sigma=1.158019 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9039 mas, bmaj=2.19 mas, bpa=-4.145 degrees ! Estimated noise=1.00208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000672562 Jy ! Component: 100 - total flux cleaned = 0.000881586 Jy ! Component: 150 - total flux cleaned = 0.000881356 Jy ! Component: 200 - total flux cleaned = 0.000995761 Jy ! Total flux subtracted in 200 components = 0.000995761 Jy ! Clean residual min=-0.005593 max=0.005454 Jy/beam ! Clean residual mean=0.000008 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.627572 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.627572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074686Jy sigma=1.156112 ! Fit after self-cal, rms=0.074679Jy sigma=1.156006 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074679Jy sigma=1.156006 ! Fit after self-cal, rms=0.073226Jy sigma=1.127734 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311593 Jy ! Component: 100 - total flux cleaned = 0.00039095 Jy ! Component: 150 - total flux cleaned = 0.000434994 Jy ! Component: 200 - total flux cleaned = 0.000472184 Jy ! Total flux subtracted in 200 components = 0.000472184 Jy ! Clean residual min=-0.005650 max=0.005413 Jy/beam ! Clean residual mean=0.000007 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.628044 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.628044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073226Jy sigma=1.127446 ! Fit after self-cal, rms=0.073169Jy sigma=1.125390 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9039 x 2.19 at -4.145 degrees (North through East) ! Clean map min=-0.0051402 max=0.59615 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073169Jy sigma=1.125390 ! Fit after self-cal, rms=0.066329Jy sigma=0.969502 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066329Jy sigma=0.969502 ! Fit after self-cal, rms=0.066342Jy sigma=0.969272 ! Inverting map and beam ! Estimated beam: bmin=0.9049 mas, bmaj=2.191 mas, bpa=-4.198 degrees ! Estimated noise=1.00076 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000754709 Jy ! Component: 100 - total flux cleaned = 0.00087859 Jy ! Component: 150 - total flux cleaned = 0.000929112 Jy ! Component: 200 - total flux cleaned = 0.000970738 Jy ! Total flux subtracted in 200 components = 0.000970738 Jy ! Clean residual min=-0.003767 max=0.003836 Jy/beam ! Clean residual mean=0.000007 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.629015 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.629015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066326Jy sigma=0.968840 ! Fit after self-cal, rms=0.066332Jy sigma=0.968778 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066332Jy sigma=0.968778 ! Fit after self-cal, rms=0.064940Jy sigma=0.948298 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064940Jy sigma=0.948298 ! Fit after self-cal, rms=0.064941Jy sigma=0.948291 ! Inverting map and beam ! Estimated beam: bmin=0.9042 mas, bmaj=2.192 mas, bpa=-4.296 degrees ! Estimated noise=1.00118 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665777 Jy ! Component: 100 - total flux cleaned = 0.000754669 Jy ! Component: 150 - total flux cleaned = 0.000791098 Jy ! Component: 200 - total flux cleaned = 0.000822364 Jy ! Total flux subtracted in 200 components = 0.000822364 Jy ! Clean residual min=-0.003746 max=0.003871 Jy/beam ! Clean residual mean=0.000008 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.629837 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.629837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064935Jy sigma=0.948020 ! Fit after self-cal, rms=0.064935Jy sigma=0.948000 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.226 mas, bmaj=3.964 mas, bpa=-8.517 degrees ! Estimated noise=1.2939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229497 Jy ! Component: 100 - total flux cleaned = 0.000228863 Jy ! Component: 150 - total flux cleaned = 0.000227054 Jy ! Component: 200 - total flux cleaned = 0.000226579 Jy ! Total flux subtracted in 200 components = 0.000226579 Jy ! Clean residual min=-0.004924 max=0.004247 Jy/beam ! Clean residual mean=0.000013 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.630063 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.630063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064943Jy sigma=0.948044 ! Fit after self-cal, rms=0.064946Jy sigma=0.947991 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7165 mas, bmaj=1.807 mas, bpa=-5.185 degrees ! Estimated noise=1.34483 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.513306 Jy ! Component: 100 - total flux cleaned = 0.582608 Jy ! Component: 150 - total flux cleaned = 0.604383 Jy ! Component: 200 - total flux cleaned = 0.615675 Jy ! Total flux subtracted in 200 components = 0.615675 Jy ! Clean residual min=-0.005749 max=0.005000 Jy/beam ! Clean residual mean=0.000020 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.615675 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.615675 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9042 mas, bmaj=2.192 mas, bpa=-4.296 degrees ! Estimated noise=1.00118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788222 Jy ! Component: 100 - total flux cleaned = 0.0112663 Jy ! Component: 150 - total flux cleaned = 0.0129081 Jy ! Component: 200 - total flux cleaned = 0.0137404 Jy ! Total flux subtracted in 200 components = 0.0137404 Jy ! Clean residual min=-0.003734 max=0.003854 Jy/beam ! Clean residual mean=0.000009 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.629415 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 50 components and 0.629416 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.226 mas, bmaj=3.964 mas, bpa=-8.517 degrees ! Estimated noise=1.2939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444446 Jy ! Component: 100 - total flux cleaned = 0.000478428 Jy ! Component: 150 - total flux cleaned = 0.00050731 Jy ! Component: 200 - total flux cleaned = 0.000532309 Jy ! Total flux subtracted in 200 components = 0.000532309 Jy ! Clean residual min=-0.004913 max=0.004258 Jy/beam ! Clean residual mean=0.000013 rms=0.001383 Jy/beam ! Combined flux in latest and established models = 0.629948 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.629948 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9042 mas, bmaj=2.192 mas, bpa=-4.296 degrees ! Estimated noise=1.00118 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.29096e-05 Jy ! Component: 100 - total flux cleaned = -7.00793e-05 Jy ! Component: 150 - total flux cleaned = -5.36039e-05 Jy ! Component: 200 - total flux cleaned = -5.3725e-05 Jy ! Total flux subtracted in 200 components = -5.3725e-05 Jy ! Clean residual min=-0.003731 max=0.003831 Jy/beam ! Clean residual mean=0.000008 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.629894 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.629894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064931Jy sigma=0.947936 ! Fit after self-cal, rms=0.064930Jy sigma=0.947890 wmodel J0050-0929_X_2005_06_30_yyk\_map.mod ! Writing 56 model components to file: J0050-0929_X_2005_06_30_yyk_map.mod wobs J0050-0929_X_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0050-0929_X_2005_06_30_yyk_uvs.fits wwins J0050-0929_X_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J0050-0929_X_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947387 Jy ! Component: 100 - total flux cleaned = 0.00121112 Jy ! Component: 150 - total flux cleaned = 0.00139837 Jy ! Component: 200 - total flux cleaned = 0.00170041 Jy ! Component: 250 - total flux cleaned = 0.00193102 Jy ! Component: 300 - total flux cleaned = 0.00209711 Jy ! Component: 350 - total flux cleaned = 0.00231258 Jy ! Component: 400 - total flux cleaned = 0.00236467 Jy ! Component: 450 - total flux cleaned = 0.00246501 Jy ! Component: 500 - total flux cleaned = 0.00261046 Jy ! Component: 550 - total flux cleaned = 0.0026579 Jy ! Component: 600 - total flux cleaned = 0.00274944 Jy ! Component: 650 - total flux cleaned = 0.00279396 Jy ! Component: 700 - total flux cleaned = 0.00296863 Jy ! Component: 750 - total flux cleaned = 0.00301066 Jy ! Component: 800 - total flux cleaned = 0.00297023 Jy ! Component: 850 - total flux cleaned = 0.00313417 Jy ! Component: 900 - total flux cleaned = 0.00313404 Jy ! Component: 950 - total flux cleaned = 0.00333006 Jy ! Component: 1000 - total flux cleaned = 0.003484 Jy ! Component: 1050 - total flux cleaned = 0.00363472 Jy ! Component: 1100 - total flux cleaned = 0.0037086 Jy ! Component: 1150 - total flux cleaned = 0.00374523 Jy ! Component: 1200 - total flux cleaned = 0.00381718 Jy ! Component: 1250 - total flux cleaned = 0.00385221 Jy ! Component: 1300 - total flux cleaned = 0.00392125 Jy ! Component: 1350 - total flux cleaned = 0.0040582 Jy ! Component: 1400 - total flux cleaned = 0.00412563 Jy ! Component: 1450 - total flux cleaned = 0.00429178 Jy ! Component: 1500 - total flux cleaned = 0.00435709 Jy ! Component: 1550 - total flux cleaned = 0.00448604 Jy ! Component: 1600 - total flux cleaned = 0.00455047 Jy ! Component: 1650 - total flux cleaned = 0.00470738 Jy ! Component: 1700 - total flux cleaned = 0.00464551 Jy ! Component: 1750 - total flux cleaned = 0.00489061 Jy ! Component: 1800 - total flux cleaned = 0.00498131 Jy ! Component: 1850 - total flux cleaned = 0.00510081 Jy ! Component: 1900 - total flux cleaned = 0.00527796 Jy ! Component: 1950 - total flux cleaned = 0.00539553 Jy ! Component: 2000 - total flux cleaned = 0.00562744 Jy ! Total flux subtracted in 2048 components = 0.0058283 Jy ! Clean residual min=-0.001886 max=0.001551 Jy/beam ! Clean residual mean=0.000006 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.635722 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 190 components and 0.635722 Jy ![Exited script file: muppet] wmap "J0050-0929_X_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9042 x 2.192 at -4.296 degrees (North through East) ! Clean map min=-0.0030827 max=0.59566 Jy/beam ! Writing clean map to FITS file: J0050-0929_X_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.595664 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000529755 device "J0050-0929_X_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0050-0929_X_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266805 0.266805 0.533611 1.06722 2.13444 4.26888 8.53777 17.0755 34.1511 68.3021 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.595 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9042 x 2.192 at -4.296 degrees (North through East) ! Clean map min=-0.0030827 max=0.59566 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0929_X_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0050-0929_X_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0050-0929_X_2005_06_30_yyk_uvs.log closed on Sat Oct 8 16:47:13 2005