! Started logfile: J0050-0929_S_2005_06_30_yyk_uvs.log on Sat Oct 8 16:46:56 2005 obs J0050-0929_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0050-0929_S_2005_06_30_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.940741 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1468 lines of history. ! ! Reading 1524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0050-0929_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.45539 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=6.506 mas, bpa=-6.851 degrees ! Estimated noise=1.48952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.367968 Jy ! Component: 100 - total flux cleaned = 0.424812 Jy ! Total flux subtracted in 100 components = 0.424812 Jy ! Clean residual min=-0.012356 max=0.016048 Jy/beam ! Clean residual mean=0.000127 rms=0.003792 Jy/beam ! Combined flux in latest and established models = 0.424812 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.424812 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.102124Jy sigma=1.509292 ! Fit after self-cal, rms=0.101907Jy sigma=1.505127 ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=6.506 mas, bpa=-6.851 degrees ! Estimated noise=1.48952 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=8.141 mas, bpa=-5.948 degrees ! Estimated noise=1.06075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255064 Jy ! Component: 100 - total flux cleaned = 0.0356848 Jy ! Component: 150 - total flux cleaned = 0.0401042 Jy ! Component: 200 - total flux cleaned = 0.0411807 Jy ! Total flux subtracted in 200 components = 0.0411807 Jy ! Clean residual min=-0.010209 max=0.013272 Jy/beam ! Clean residual mean=0.000077 rms=0.003255 Jy/beam ! Combined flux in latest and established models = 0.465992 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.465993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095023Jy sigma=1.420887 ! Fit after self-cal, rms=0.095009Jy sigma=1.420533 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 8.141 at -5.948 degrees (North through East) ! Clean map min=-0.010049 max=0.42586 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01216 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 0.96 ! LA 1.06 MK 0.93 NL 0.94 OV 0.97 ! PT 1.07 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00056 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.05 KP 1.03 ! LA 1.00 MK 0.97 NL 0.99 OV 0.98 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.944072 ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 0.92 HN 1.01 KP 0.99 ! LA 0.94 MK 1.09 NL 1.03 OV 1.01 ! PT 1.11 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04721 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 0.90 KP 0.89 ! LA 0.77 MK 1.09 NL 0.97 OV 0.85 ! PT 0.98 SC 1.09 ! ! ! Fit before self-cal, rms=0.095009Jy sigma=1.420533 ! Fit after self-cal, rms=0.080819Jy sigma=1.185053 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080819Jy sigma=1.185053 ! Fit after self-cal, rms=0.080817Jy sigma=1.184903 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=8.27 mas, bpa=-5.507 degrees ! Estimated noise=1.0541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120066 Jy ! Component: 100 - total flux cleaned = -0.00119913 Jy ! Component: 150 - total flux cleaned = -0.00119836 Jy ! Component: 200 - total flux cleaned = -0.00120184 Jy ! Total flux subtracted in 200 components = -0.00120184 Jy ! Clean residual min=-0.005679 max=0.004998 Jy/beam ! Clean residual mean=0.000011 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.464791 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.464791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080541Jy sigma=1.179310 ! Fit after self-cal, rms=0.080524Jy sigma=1.179066 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080524Jy sigma=1.179066 ! Fit after self-cal, rms=0.078629Jy sigma=1.145503 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109406 Jy ! Component: 100 - total flux cleaned = 0.000105111 Jy ! Component: 150 - total flux cleaned = 0.000106578 Jy ! Component: 200 - total flux cleaned = 3.96059e-05 Jy ! Total flux subtracted in 200 components = 3.96059e-05 Jy ! Clean residual min=-0.005522 max=0.004867 Jy/beam ! Clean residual mean=0.000015 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.46483 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.46483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078493Jy sigma=1.143103 ! Fit after self-cal, rms=0.078448Jy sigma=1.140596 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.395 x 8.27 at -5.507 degrees (North through East) ! Clean map min=-0.0052631 max=0.42664 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078448Jy sigma=1.140596 ! Fit after self-cal, rms=0.070093Jy sigma=0.977047 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070093Jy sigma=0.977047 ! Fit after self-cal, rms=0.070142Jy sigma=0.976767 ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=8.277 mas, bpa=-5.559 degrees ! Estimated noise=1.05149 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154903 Jy ! Component: 100 - total flux cleaned = -9.5269e-05 Jy ! Component: 150 - total flux cleaned = -9.84516e-05 Jy ! Component: 200 - total flux cleaned = -0.00014551 Jy ! Total flux subtracted in 200 components = -0.00014551 Jy ! Clean residual min=-0.004860 max=0.004782 Jy/beam ! Clean residual mean=0.000019 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.464685 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.464685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070052Jy sigma=0.975401 ! Fit after self-cal, rms=0.070066Jy sigma=0.975286 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070066Jy sigma=0.975286 ! Fit after self-cal, rms=0.068238Jy sigma=0.949468 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068238Jy sigma=0.949468 ! Fit after self-cal, rms=0.068249Jy sigma=0.949456 ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=8.281 mas, bpa=-5.592 degrees ! Estimated noise=1.05254 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000659795 Jy ! Component: 100 - total flux cleaned = 0.00070699 Jy ! Component: 150 - total flux cleaned = 0.000705512 Jy ! Component: 200 - total flux cleaned = 0.000666319 Jy ! Total flux subtracted in 200 components = 0.000666319 Jy ! Clean residual min=-0.004689 max=0.004574 Jy/beam ! Clean residual mean=0.000022 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.465351 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.465351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068192Jy sigma=0.948475 ! Fit after self-cal, rms=0.068187Jy sigma=0.948417 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.964 mas, bmaj=14.46 mas, bpa=-8.624 degrees ! Estimated noise=1.32823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299275 Jy ! Component: 100 - total flux cleaned = 0.000250445 Jy ! Component: 150 - total flux cleaned = 0.000213621 Jy ! Component: 200 - total flux cleaned = 0.000186906 Jy ! Total flux subtracted in 200 components = 0.000186906 Jy ! Clean residual min=-0.005868 max=0.005508 Jy/beam ! Clean residual mean=0.000043 rms=0.002001 Jy/beam ! Combined flux in latest and established models = 0.465538 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 65 components and 0.465538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068199Jy sigma=0.948373 ! Fit after self-cal, rms=0.068166Jy sigma=0.947936 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=6.573 mas, bpa=-6.921 degrees ! Estimated noise=1.47713 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.365228 Jy ! Component: 100 - total flux cleaned = 0.420465 Jy ! Component: 150 - total flux cleaned = 0.441129 Jy ! Component: 200 - total flux cleaned = 0.451744 Jy ! Total flux subtracted in 200 components = 0.451744 Jy ! Clean residual min=-0.006103 max=0.006498 Jy/beam ! Clean residual mean=0.000002 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.451744 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.451744 Jy ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=8.281 mas, bpa=-5.592 degrees ! Estimated noise=1.05254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00827354 Jy ! Component: 100 - total flux cleaned = 0.0115785 Jy ! Component: 150 - total flux cleaned = 0.0127339 Jy ! Component: 200 - total flux cleaned = 0.0128197 Jy ! Total flux subtracted in 200 components = 0.0128197 Jy ! Clean residual min=-0.004629 max=0.004646 Jy/beam ! Clean residual mean=0.000025 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.464564 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 67 components and 0.464564 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.964 mas, bmaj=14.46 mas, bpa=-8.624 degrees ! Estimated noise=1.32823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704472 Jy ! Component: 100 - total flux cleaned = 0.000701642 Jy ! Component: 150 - total flux cleaned = 0.000698003 Jy ! Component: 200 - total flux cleaned = 0.000697792 Jy ! Total flux subtracted in 200 components = 0.000697792 Jy ! Clean residual min=-0.005849 max=0.005487 Jy/beam ! Clean residual mean=0.000046 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 0.465262 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 71 components and 0.465262 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=8.281 mas, bpa=-5.592 degrees ! Estimated noise=1.05254 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.17111e-07 Jy ! Component: 100 - total flux cleaned = -1.79071e-06 Jy ! Component: 150 - total flux cleaned = 3.05593e-05 Jy ! Component: 200 - total flux cleaned = 1.48887e-06 Jy ! Total flux subtracted in 200 components = 1.48887e-06 Jy ! Clean residual min=-0.004494 max=0.004547 Jy/beam ! Clean residual mean=0.000024 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.465263 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.465263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068118Jy sigma=0.947342 ! Fit after self-cal, rms=0.068107Jy sigma=0.947230 wmodel J0050-0929_S_2005_06_30_yyk\_map.mod ! Writing 82 model components to file: J0050-0929_S_2005_06_30_yyk_map.mod wobs J0050-0929_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0050-0929_S_2005_06_30_yyk_uvs.fits wwins J0050-0929_S_2005_06_30_yyk\_map.win ! wwins: Wrote 1 windows to J0050-0929_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000903645 Jy ! Component: 100 - total flux cleaned = 0.00171346 Jy ! Component: 150 - total flux cleaned = 0.0025223 Jy ! Component: 200 - total flux cleaned = 0.00284252 Jy ! Component: 250 - total flux cleaned = 0.00302234 Jy ! Component: 300 - total flux cleaned = 0.00307807 Jy ! Component: 350 - total flux cleaned = 0.00318932 Jy ! Component: 400 - total flux cleaned = 0.00318867 Jy ! Component: 450 - total flux cleaned = 0.00313582 Jy ! Component: 500 - total flux cleaned = 0.00318463 Jy ! Component: 550 - total flux cleaned = 0.00318503 Jy ! Component: 600 - total flux cleaned = 0.00332641 Jy ! Component: 650 - total flux cleaned = 0.00323472 Jy ! Component: 700 - total flux cleaned = 0.00314625 Jy ! Component: 750 - total flux cleaned = 0.00306017 Jy ! Component: 800 - total flux cleaned = 0.00305979 Jy ! Component: 850 - total flux cleaned = 0.00309842 Jy ! Component: 900 - total flux cleaned = 0.00293795 Jy ! Component: 950 - total flux cleaned = 0.00278346 Jy ! Component: 1000 - total flux cleaned = 0.00274561 Jy ! Component: 1050 - total flux cleaned = 0.00248657 Jy ! Component: 1100 - total flux cleaned = 0.0023775 Jy ! Component: 1150 - total flux cleaned = 0.00237741 Jy ! Component: 1200 - total flux cleaned = 0.00237731 Jy ! Component: 1250 - total flux cleaned = 0.00230927 Jy ! Component: 1300 - total flux cleaned = 0.00227608 Jy ! Component: 1350 - total flux cleaned = 0.00221004 Jy ! Component: 1400 - total flux cleaned = 0.0021451 Jy ! Component: 1450 - total flux cleaned = 0.00208082 Jy ! Component: 1500 - total flux cleaned = 0.00208074 Jy ! Component: 1550 - total flux cleaned = 0.00201816 Jy ! Component: 1600 - total flux cleaned = 0.00192561 Jy ! Component: 1650 - total flux cleaned = 0.00192506 Jy ! Component: 1700 - total flux cleaned = 0.00177606 Jy ! Component: 1750 - total flux cleaned = 0.00168853 Jy ! Component: 1800 - total flux cleaned = 0.00168833 Jy ! Component: 1850 - total flux cleaned = 0.00163137 Jy ! Component: 1900 - total flux cleaned = 0.00146306 Jy ! Component: 1950 - total flux cleaned = 0.00138072 Jy ! Component: 2000 - total flux cleaned = 0.00140853 Jy ! Total flux subtracted in 2048 components = 0.0013005 Jy ! Clean residual min=-0.001899 max=0.001486 Jy/beam ! Clean residual mean=0.000019 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.466564 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 216 components and 0.466564 Jy ![Exited script file: muppet] wmap "J0050-0929_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 8.281 at -5.592 degrees (North through East) ! Clean map min=-0.00335 max=0.42787 Jy/beam ! Writing clean map to FITS file: J0050-0929_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.427871 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00058667 device "J0050-0929_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0050-0929_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.411342 0.411342 0.822684 1.64537 3.29074 6.58147 13.1629 26.3259 52.6518 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.427 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.399 x 8.281 at -5.592 degrees (North through East) ! Clean map min=-0.00335 max=0.42787 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0929_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0050-0929_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0050-0929_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 16:47:00 2005