! Started logfile: J0050-0929_S_2005_06_01_yyk_uvs.log on Sat Oct 8 16:46:52 2005 obs J0050-0929_S_2005_06_01_yyk_uve.fits ! Reading UV FITS file: J0050-0929_S_2005_06_01_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95 visibilities/baseline/integration-bin. ! Found source: J0050-0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1801 lines of history. ! ! Reading 684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0050-0929_S_2005_06_01_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.448019 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=6.841 mas, bpa=-1.57 degrees ! Estimated noise=1.78933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.369821 Jy ! Component: 100 - total flux cleaned = 0.423939 Jy ! Total flux subtracted in 100 components = 0.423939 Jy ! Clean residual min=-0.016705 max=0.017400 Jy/beam ! Clean residual mean=-0.000115 rms=0.004094 Jy/beam ! Combined flux in latest and established models = 0.423939 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.423939 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.093786Jy sigma=1.489094 ! Fit after self-cal, rms=0.093735Jy sigma=1.485739 ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=6.841 mas, bpa=-1.57 degrees ! Estimated noise=1.78933 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.4 mas, bpa=-4.025 degrees ! Estimated noise=1.48492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172749 Jy ! Component: 100 - total flux cleaned = 0.0236365 Jy ! Component: 150 - total flux cleaned = 0.0259297 Jy ! Component: 200 - total flux cleaned = 0.0261959 Jy ! Total flux subtracted in 200 components = 0.0261959 Jy ! Clean residual min=-0.012715 max=0.014574 Jy/beam ! Clean residual mean=-0.000156 rms=0.003905 Jy/beam ! Combined flux in latest and established models = 0.450135 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.450135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089366Jy sigma=1.443213 ! Fit after self-cal, rms=0.089369Jy sigma=1.443169 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.104 x 8.4 at -4.025 degrees (North through East) ! Clean map min=-0.012185 max=0.4243 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01334 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.99 KP 0.91 ! LA 1.19 MK 0.89 NL 0.92 OV 0.95 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.980348 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 1.05 KP 0.99 ! LA 1.14 MK 1.01 NL 0.93 OV 0.98 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.979721 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.24 HN 1.04 KP 0.94 ! LA 0.91 MK 1.08 NL 1.04 OV 0.97 ! PT 1.07 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06015 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 0.90 KP 0.85 ! LA 0.76 MK 1.08 NL 0.95 OV 0.83 ! PT 0.97 SC 1.07 ! ! ! Fit before self-cal, rms=0.089369Jy sigma=1.443169 ! Fit after self-cal, rms=0.067643Jy sigma=1.085878 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067643Jy sigma=1.085878 ! Fit after self-cal, rms=0.067640Jy sigma=1.085769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=8.416 mas, bpa=-3.937 degrees ! Estimated noise=1.4883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361942 Jy ! Component: 100 - total flux cleaned = 0.0044255 Jy ! Component: 150 - total flux cleaned = 0.00448019 Jy ! Component: 200 - total flux cleaned = 0.00450426 Jy ! Total flux subtracted in 200 components = 0.00450426 Jy ! Clean residual min=-0.005266 max=0.005843 Jy/beam ! Clean residual mean=0.000130 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.454639 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.454639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067309Jy sigma=1.082955 ! Fit after self-cal, rms=0.067308Jy sigma=1.082932 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067308Jy sigma=1.082932 ! Fit after self-cal, rms=0.065924Jy sigma=1.058611 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143456 Jy ! Component: 100 - total flux cleaned = 0.00014224 Jy ! Component: 150 - total flux cleaned = 0.000161179 Jy ! Component: 200 - total flux cleaned = 0.000179423 Jy ! Total flux subtracted in 200 components = 0.000179423 Jy ! Clean residual min=-0.005155 max=0.005796 Jy/beam ! Clean residual mean=0.000130 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.454818 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.454818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065899Jy sigma=1.058425 ! Fit after self-cal, rms=0.065841Jy sigma=1.056870 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 8.416 at -3.937 degrees (North through East) ! Clean map min=-0.0048744 max=0.42837 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065841Jy sigma=1.056870 ! Fit after self-cal, rms=0.059270Jy sigma=0.936880 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059270Jy sigma=0.936880 ! Fit after self-cal, rms=0.059276Jy sigma=0.936745 ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=8.404 mas, bpa=-3.905 degrees ! Estimated noise=1.48443 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125594 Jy ! Component: 100 - total flux cleaned = 0.000191294 Jy ! Component: 150 - total flux cleaned = 0.000191678 Jy ! Component: 200 - total flux cleaned = 0.00022848 Jy ! Total flux subtracted in 200 components = 0.00022848 Jy ! Clean residual min=-0.004661 max=0.005505 Jy/beam ! Clean residual mean=0.000134 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.455047 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.455047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059252Jy sigma=0.936526 ! Fit after self-cal, rms=0.059257Jy sigma=0.936505 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059257Jy sigma=0.936505 ! Fit after self-cal, rms=0.058760Jy sigma=0.926173 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058760Jy sigma=0.926173 ! Fit after self-cal, rms=0.058762Jy sigma=0.926168 ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.397 mas, bpa=-3.908 degrees ! Estimated noise=1.48392 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229042 Jy ! Component: 100 - total flux cleaned = 0.000265983 Jy ! Component: 150 - total flux cleaned = 0.000300902 Jy ! Component: 200 - total flux cleaned = 0.000318187 Jy ! Total flux subtracted in 200 components = 0.000318187 Jy ! Clean residual min=-0.004652 max=0.005505 Jy/beam ! Clean residual mean=0.000134 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.455365 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.455365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058750Jy sigma=0.926007 ! Fit after self-cal, rms=0.058752Jy sigma=0.925998 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.717 mas, bmaj=15.53 mas, bpa=3.557 degrees ! Estimated noise=1.87799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735582 Jy ! Component: 100 - total flux cleaned = 0.000738982 Jy ! Component: 150 - total flux cleaned = 0.000777245 Jy ! Component: 200 - total flux cleaned = 0.000849005 Jy ! Total flux subtracted in 200 components = 0.000849005 Jy ! Clean residual min=-0.004968 max=0.007239 Jy/beam ! Clean residual mean=0.000274 rms=0.002125 Jy/beam ! Combined flux in latest and established models = 0.456214 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.456214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058830Jy sigma=0.926926 ! Fit after self-cal, rms=0.058827Jy sigma=0.926464 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.632 mas, bmaj=6.849 mas, bpa=-1.545 degrees ! Estimated noise=1.77969 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.368038 Jy ! Component: 100 - total flux cleaned = 0.42033 Jy ! Component: 150 - total flux cleaned = 0.438155 Jy ! Component: 200 - total flux cleaned = 0.446145 Jy ! Total flux subtracted in 200 components = 0.446145 Jy ! Clean residual min=-0.006400 max=0.005240 Jy/beam ! Clean residual mean=0.000021 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.446145 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.446145 Jy ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.397 mas, bpa=-3.908 degrees ! Estimated noise=1.48392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578106 Jy ! Component: 100 - total flux cleaned = 0.00815423 Jy ! Component: 150 - total flux cleaned = 0.00871713 Jy ! Component: 200 - total flux cleaned = 0.00886222 Jy ! Total flux subtracted in 200 components = 0.00886222 Jy ! Clean residual min=-0.004656 max=0.005555 Jy/beam ! Clean residual mean=0.000134 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 0.455007 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 0.455007 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.717 mas, bmaj=15.53 mas, bpa=3.557 degrees ! Estimated noise=1.87799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956899 Jy ! Component: 100 - total flux cleaned = 0.000957063 Jy ! Component: 150 - total flux cleaned = 0.00109145 Jy ! Component: 200 - total flux cleaned = 0.00121231 Jy ! Total flux subtracted in 200 components = 0.00121231 Jy ! Clean residual min=-0.005027 max=0.007164 Jy/beam ! Clean residual mean=0.000274 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.45622 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 52 components and 0.45622 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=8.397 mas, bpa=-3.908 degrees ! Estimated noise=1.48392 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393294 Jy ! Component: 100 - total flux cleaned = -0.000430109 Jy ! Component: 150 - total flux cleaned = -0.000391813 Jy ! Component: 200 - total flux cleaned = -0.000425535 Jy ! Total flux subtracted in 200 components = -0.000425535 Jy ! Clean residual min=-0.004623 max=0.005610 Jy/beam ! Clean residual mean=0.000132 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.455794 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.455794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058816Jy sigma=0.926622 ! Fit after self-cal, rms=0.058819Jy sigma=0.926577 wmodel J0050-0929_S_2005_06_01_yyk\_map.mod ! Writing 58 model components to file: J0050-0929_S_2005_06_01_yyk_map.mod wobs J0050-0929_S_2005_06_01_yyk\_uvs.fits ! Writing UV FITS file: J0050-0929_S_2005_06_01_yyk_uvs.fits wwins J0050-0929_S_2005_06_01_yyk\_map.win ! wwins: Wrote 1 windows to J0050-0929_S_2005_06_01_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220076 Jy ! Component: 100 - total flux cleaned = 0.00229341 Jy ! Component: 150 - total flux cleaned = 0.00252774 Jy ! Component: 200 - total flux cleaned = 0.00274306 Jy ! Component: 250 - total flux cleaned = 0.00301599 Jy ! Component: 300 - total flux cleaned = 0.00340638 Jy ! Component: 350 - total flux cleaned = 0.00365466 Jy ! Component: 400 - total flux cleaned = 0.00412746 Jy ! Component: 450 - total flux cleaned = 0.00429872 Jy ! Component: 500 - total flux cleaned = 0.00440852 Jy ! Component: 550 - total flux cleaned = 0.00461776 Jy ! Component: 600 - total flux cleaned = 0.00471871 Jy ! Component: 650 - total flux cleaned = 0.00481604 Jy ! Component: 700 - total flux cleaned = 0.00505319 Jy ! Component: 750 - total flux cleaned = 0.00514556 Jy ! Component: 800 - total flux cleaned = 0.00536903 Jy ! Component: 850 - total flux cleaned = 0.00541347 Jy ! Component: 900 - total flux cleaned = 0.00566749 Jy ! Component: 950 - total flux cleaned = 0.00558429 Jy ! Component: 1000 - total flux cleaned = 0.00566522 Jy ! Component: 1050 - total flux cleaned = 0.00570444 Jy ! Component: 1100 - total flux cleaned = 0.00555037 Jy ! Component: 1150 - total flux cleaned = 0.00562663 Jy ! Component: 1200 - total flux cleaned = 0.00562643 Jy ! Component: 1250 - total flux cleaned = 0.00551877 Jy ! Component: 1300 - total flux cleaned = 0.00530762 Jy ! Component: 1350 - total flux cleaned = 0.00506442 Jy ! Component: 1400 - total flux cleaned = 0.00482551 Jy ! Component: 1450 - total flux cleaned = 0.00449178 Jy ! Component: 1500 - total flux cleaned = 0.00426163 Jy ! Component: 1550 - total flux cleaned = 0.00393939 Jy ! Component: 1600 - total flux cleaned = 0.00358983 Jy ! Component: 1650 - total flux cleaned = 0.00327818 Jy ! Component: 1700 - total flux cleaned = 0.0029719 Jy ! Component: 1750 - total flux cleaned = 0.00270004 Jy ! Component: 1800 - total flux cleaned = 0.0023744 Jy ! Component: 1850 - total flux cleaned = 0.00205489 Jy ! Component: 1900 - total flux cleaned = 0.00173963 Jy ! Component: 1950 - total flux cleaned = 0.00134445 Jy ! Component: 2000 - total flux cleaned = 0.000927166 Jy ! Total flux subtracted in 2048 components = 0.000625311 Jy ! Clean residual min=-0.001596 max=0.001495 Jy/beam ! Clean residual mean=0.000004 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.456419 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 189 components and 0.456419 Jy ![Exited script file: muppet] wmap "J0050-0929_S_2005_06_01_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 8.397 at -3.908 degrees (North through East) ! Clean map min=-0.0029915 max=0.42707 Jy/beam ! Writing clean map to FITS file: J0050-0929_S_2005_06_01_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.427073 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00055363 device "J0050-0929_S_2005_06_01_yyk\_map.eps/VPS" ! Attempting to open device: 'J0050-0929_S_2005_06_01_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.388901 0.388901 0.777802 1.5556 3.11121 6.22241 12.4448 24.8897 49.7793 99.5586 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.427 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 8.397 at -3.908 degrees (North through East) ! Clean map min=-0.0029915 max=0.42707 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0050-0929_S_2005_06_01_yyk\_map.gif/gif" ! Attempting to open device: 'J0050-0929_S_2005_06_01_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0050-0929_S_2005_06_01_yyk_uvs.log closed on Sat Oct 8 16:46:56 2005