! Started logfile: J0026-1112_S_2005_06_30_yyk_uvs.log on Sat Oct 8 16:46:16 2005 obs J0026-1112_S_2005_06_30_yyk_uve.fits ! Reading UV FITS file: J0026-1112_S_2005_06_30_yyk_uve.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0026-1112 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1468 lines of history. ! ! Reading 3240 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0026-1112_S_2005_06_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.157659 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=6.332 mas, bpa=-2.156 degrees ! Estimated noise=0.92843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.113559 Jy ! Component: 100 - total flux cleaned = 0.142999 Jy ! Total flux subtracted in 100 components = 0.142999 Jy ! Clean residual min=-0.005404 max=0.009600 Jy/beam ! Clean residual mean=-0.000022 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.142999 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.142999 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065780Jy sigma=1.145522 ! Fit after self-cal, rms=0.065639Jy sigma=1.142103 ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=6.332 mas, bpa=-2.156 degrees ! Estimated noise=0.92843 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=7.758 mas, bpa=-3.387 degrees ! Estimated noise=0.654527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175907 Jy ! Component: 100 - total flux cleaned = 0.0247575 Jy ! Component: 150 - total flux cleaned = 0.0281489 Jy ! Component: 200 - total flux cleaned = 0.0297951 Jy ! Total flux subtracted in 200 components = 0.0297951 Jy ! Clean residual min=-0.004010 max=0.003638 Jy/beam ! Clean residual mean=-0.000038 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.172794 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.172794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061963Jy sigma=1.076331 ! Fit after self-cal, rms=0.061955Jy sigma=1.076238 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.041 x 7.758 at -3.387 degrees (North through East) ! Clean map min=-0.0039404 max=0.13439 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02498 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.00 KP 0.94 ! LA 1.10 MK 0.94 NL 0.97 OV 0.97 ! PT 1.04 SC 0.89 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.991792 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.09 KP 1.03 ! LA 1.02 MK 0.99 NL 1.01 OV 1.01 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.061955Jy sigma=1.076238 ! Fit after self-cal, rms=0.061503Jy sigma=1.069759 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061503Jy sigma=1.069759 ! Fit after self-cal, rms=0.061503Jy sigma=1.069709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=7.616 mas, bpa=-2.944 degrees ! Estimated noise=0.654277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275652 Jy ! Component: 100 - total flux cleaned = 0.0033337 Jy ! Component: 150 - total flux cleaned = 0.00362958 Jy ! Component: 200 - total flux cleaned = 0.00384231 Jy ! Total flux subtracted in 200 components = 0.00384231 Jy ! Clean residual min=-0.003786 max=0.003854 Jy/beam ! Clean residual mean=0.000015 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.176637 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.176637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061374Jy sigma=1.067696 ! Fit after self-cal, rms=0.061372Jy sigma=1.067641 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061372Jy sigma=1.067641 ! Fit after self-cal, rms=0.059493Jy sigma=1.032620 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000652685 Jy ! Component: 100 - total flux cleaned = 0.000816331 Jy ! Component: 150 - total flux cleaned = 0.000938805 Jy ! Component: 200 - total flux cleaned = 0.00100531 Jy ! Total flux subtracted in 200 components = 0.00100531 Jy ! Clean residual min=-0.003776 max=0.003717 Jy/beam ! Clean residual mean=0.000015 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.177642 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.177642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059467Jy sigma=1.032275 ! Fit after self-cal, rms=0.059395Jy sigma=1.030572 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.009 x 7.616 at -2.944 degrees (North through East) ! Clean map min=-0.0038056 max=0.13359 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059395Jy sigma=1.030572 ! Fit after self-cal, rms=0.058109Jy sigma=1.004909 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058109Jy sigma=1.004909 ! Fit after self-cal, rms=0.058109Jy sigma=1.004605 ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=7.507 mas, bpa=-2.158 degrees ! Estimated noise=0.656064 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234884 Jy ! Component: 100 - total flux cleaned = 0.00326745 Jy ! Component: 150 - total flux cleaned = 0.00340083 Jy ! Component: 200 - total flux cleaned = 0.00350221 Jy ! Total flux subtracted in 200 components = 0.00350221 Jy ! Clean residual min=-0.002902 max=0.002861 Jy/beam ! Clean residual mean=0.000023 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.181144 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.181144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057992Jy sigma=1.003267 ! Fit after self-cal, rms=0.057994Jy sigma=1.003233 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057994Jy sigma=1.003233 ! Fit after self-cal, rms=0.058212Jy sigma=0.989307 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058212Jy sigma=0.989307 ! Fit after self-cal, rms=0.058218Jy sigma=0.989251 ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.471 mas, bpa=-2.181 degrees ! Estimated noise=0.661165 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223373 Jy ! Component: 100 - total flux cleaned = 0.00318986 Jy ! Component: 150 - total flux cleaned = 0.00347952 Jy ! Component: 200 - total flux cleaned = 0.00357091 Jy ! Total flux subtracted in 200 components = 0.00357091 Jy ! Clean residual min=-0.002710 max=0.002735 Jy/beam ! Clean residual mean=0.000033 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.184715 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.184715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058109Jy sigma=0.988032 ! Fit after self-cal, rms=0.058109Jy sigma=0.988017 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.592 mas, bmaj=14.02 mas, bpa=4.299 degrees ! Estimated noise=0.879637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012398 Jy ! Component: 100 - total flux cleaned = 0.00134412 Jy ! Component: 150 - total flux cleaned = 0.00140855 Jy ! Component: 200 - total flux cleaned = 0.00146628 Jy ! Total flux subtracted in 200 components = 0.00146628 Jy ! Clean residual min=-0.002960 max=0.002927 Jy/beam ! Clean residual mean=0.000067 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.186181 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.186181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058111Jy sigma=0.988248 ! Fit after self-cal, rms=0.058106Jy sigma=0.988154 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=6.256 mas, bpa=-1.593 degrees ! Estimated noise=0.915641 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.113654 Jy ! Component: 100 - total flux cleaned = 0.145144 Jy ! Component: 150 - total flux cleaned = 0.16031 Jy ! Component: 200 - total flux cleaned = 0.169013 Jy ! Total flux subtracted in 200 components = 0.169013 Jy ! Clean residual min=-0.003924 max=0.004862 Jy/beam ! Clean residual mean=0.000039 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.169013 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.169013 Jy ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.471 mas, bpa=-2.181 degrees ! Estimated noise=0.661165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00837546 Jy ! Component: 100 - total flux cleaned = 0.0127052 Jy ! Component: 150 - total flux cleaned = 0.0152399 Jy ! Component: 200 - total flux cleaned = 0.0166052 Jy ! Total flux subtracted in 200 components = 0.0166052 Jy ! Clean residual min=-0.002598 max=0.002877 Jy/beam ! Clean residual mean=0.000031 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.185619 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 65 components and 0.185619 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.592 mas, bmaj=14.02 mas, bpa=4.299 degrees ! Estimated noise=0.879637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102089 Jy ! Component: 100 - total flux cleaned = 0.000940714 Jy ! Component: 150 - total flux cleaned = 0.000966585 Jy ! Component: 200 - total flux cleaned = 0.000966452 Jy ! Total flux subtracted in 200 components = 0.000966452 Jy ! Clean residual min=-0.002831 max=0.002678 Jy/beam ! Clean residual mean=0.000067 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.186585 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.186585 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=7.471 mas, bpa=-2.181 degrees ! Estimated noise=0.661165 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127988 Jy ! Component: 100 - total flux cleaned = 8.91331e-05 Jy ! Component: 150 - total flux cleaned = 5.92332e-05 Jy ! Component: 200 - total flux cleaned = 5.91771e-05 Jy ! Total flux subtracted in 200 components = 5.91771e-05 Jy ! Clean residual min=-0.002481 max=0.002864 Jy/beam ! Clean residual mean=0.000031 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.186644 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 0.186644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057994Jy sigma=0.986225 ! Fit after self-cal, rms=0.057988Jy sigma=0.986147 wmodel J0026-1112_S_2005_06_30_yyk\_map.mod ! Writing 85 model components to file: J0026-1112_S_2005_06_30_yyk_map.mod wobs J0026-1112_S_2005_06_30_yyk\_uvs.fits ! Writing UV FITS file: J0026-1112_S_2005_06_30_yyk_uvs.fits wwins J0026-1112_S_2005_06_30_yyk\_map.win ! wwins: Wrote 2 windows to J0026-1112_S_2005_06_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.92452e-05 Jy ! Component: 100 - total flux cleaned = -2.55554e-05 Jy ! Component: 150 - total flux cleaned = 0.000132803 Jy ! Component: 200 - total flux cleaned = 0.000283413 Jy ! Component: 250 - total flux cleaned = 0.000428472 Jy ! Component: 300 - total flux cleaned = 0.000568685 Jy ! Component: 350 - total flux cleaned = 0.000771351 Jy ! Component: 400 - total flux cleaned = 0.0010011 Jy ! Component: 450 - total flux cleaned = 0.00125618 Jy ! Component: 500 - total flux cleaned = 0.00147419 Jy ! Component: 550 - total flux cleaned = 0.00171777 Jy ! Component: 600 - total flux cleaned = 0.00198499 Jy ! Component: 650 - total flux cleaned = 0.00212981 Jy ! Component: 700 - total flux cleaned = 0.00227255 Jy ! Component: 750 - total flux cleaned = 0.00243975 Jy ! Component: 800 - total flux cleaned = 0.00254825 Jy ! Component: 850 - total flux cleaned = 0.00252143 Jy ! Component: 900 - total flux cleaned = 0.00257429 Jy ! Component: 950 - total flux cleaned = 0.00260017 Jy ! Component: 1000 - total flux cleaned = 0.00260065 Jy ! Component: 1050 - total flux cleaned = 0.00265097 Jy ! Component: 1100 - total flux cleaned = 0.00265099 Jy ! Component: 1150 - total flux cleaned = 0.00269939 Jy ! Component: 1200 - total flux cleaned = 0.00274694 Jy ! Component: 1250 - total flux cleaned = 0.00274668 Jy ! Component: 1300 - total flux cleaned = 0.00276997 Jy ! Component: 1350 - total flux cleaned = 0.00274722 Jy ! Component: 1400 - total flux cleaned = 0.00272502 Jy ! Component: 1450 - total flux cleaned = 0.00276885 Jy ! Component: 1500 - total flux cleaned = 0.00279017 Jy ! Component: 1550 - total flux cleaned = 0.00266139 Jy ! Component: 1600 - total flux cleaned = 0.00268289 Jy ! Component: 1650 - total flux cleaned = 0.00266226 Jy ! Component: 1700 - total flux cleaned = 0.00268326 Jy ! Component: 1750 - total flux cleaned = 0.00270368 Jy ! Component: 1800 - total flux cleaned = 0.00268342 Jy ! Component: 1850 - total flux cleaned = 0.0027234 Jy ! Component: 1900 - total flux cleaned = 0.00272339 Jy ! Component: 1950 - total flux cleaned = 0.0026847 Jy ! Component: 2000 - total flux cleaned = 0.00268493 Jy ! Total flux subtracted in 2048 components = 0.00264676 Jy ! Clean residual min=-0.001506 max=0.001134 Jy/beam ! Clean residual mean=-0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.189291 Jy keep ! Adding 146 model components to the UV plane model. ! The established model now contains 231 components and 0.189291 Jy ![Exited script file: muppet] wmap "J0026-1112_S_2005_06_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.471 at -2.181 degrees (North through East) ! Clean map min=-0.0018312 max=0.13461 Jy/beam ! Writing clean map to FITS file: J0026-1112_S_2005_06_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.134614 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000393683 device "J0026-1112_S_2005_06_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0026-1112_S_2005_06_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.877358 0.877358 1.75472 3.50943 7.01887 14.0377 28.0755 56.1509 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.134 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 7.471 at -2.181 degrees (North through East) ! Clean map min=-0.0018312 max=0.13461 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0026-1112_S_2005_06_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0026-1112_S_2005_06_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0026-1112_S_2005_06_30_yyk_uvs.log closed on Sat Oct 8 16:46:20 2005