! Started logfile: J2358-1020_S_2004_05_27_yyk_uvs.log on Wed Dec 7 01:00:49 2005 obs J2358-1020_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2358-1020_S_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J2358-1020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 624 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2358-1020_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.592869 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.423229Jy sigma=7.754341 ! Fit after self-cal, rms=0.423175Jy sigma=7.752954 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=6.786 mas, bpa=-0.4344 degrees ! Estimated noise=1.97483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.507269 Jy ! Component: 100 - total flux cleaned = 0.578965 Jy ! Total flux subtracted in 100 components = 0.578965 Jy ! Clean residual min=-0.011531 max=0.017019 Jy/beam ! Clean residual mean=-0.000112 rms=0.003695 Jy/beam ! Combined flux in latest and established models = 0.578965 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.578965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087316Jy sigma=1.371841 ! Fit after self-cal, rms=0.087240Jy sigma=1.370843 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.034 mas, bpa=-0.9842 degrees ! Estimated noise=1.58576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222867 Jy ! Component: 100 - total flux cleaned = 0.0302272 Jy ! Component: 150 - total flux cleaned = 0.0332818 Jy ! Component: 200 - total flux cleaned = 0.033586 Jy ! Total flux subtracted in 200 components = 0.033586 Jy ! Clean residual min=-0.008573 max=0.007853 Jy/beam ! Clean residual mean=-0.000230 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 0.612551 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.612551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082282Jy sigma=1.292674 ! Fit after self-cal, rms=0.082248Jy sigma=1.292263 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00976 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.94 KP 0.97 ! LA 1.06 MK 0.97 NL 0.98 OV 1.00 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.981131 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.04 KP 1.01 ! LA 1.07 MK 1.06 NL 1.02 OV 1.01 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991114 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.89 HN 1.00 KP 0.99 ! LA 0.95 MK 1.01 NL 1.06 OV 1.03 ! PT 1.08 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02381 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.97 KP 0.92 ! LA 1.00* MK 1.00 NL 1.00 OV 0.85 ! PT 0.94 SC 1.14 ! ! ! Fit before self-cal, rms=0.082248Jy sigma=1.292263 ! Fit after self-cal, rms=0.070666Jy sigma=1.061089 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070666Jy sigma=1.061089 ! Fit after self-cal, rms=0.070681Jy sigma=1.061049 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=8.12 mas, bpa=-0.9693 degrees ! Estimated noise=1.58375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137964 Jy ! Component: 100 - total flux cleaned = -0.00119854 Jy ! Component: 150 - total flux cleaned = -0.00104433 Jy ! Component: 200 - total flux cleaned = -0.000907554 Jy ! Total flux subtracted in 200 components = -0.000907554 Jy ! Clean residual min=-0.005439 max=0.006497 Jy/beam ! Clean residual mean=-0.000044 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.611643 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.611643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070630Jy sigma=1.059157 ! Fit after self-cal, rms=0.070618Jy sigma=1.059066 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070618Jy sigma=1.059066 ! Fit after self-cal, rms=0.068100Jy sigma=1.020275 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409933 Jy ! Component: 100 - total flux cleaned = 0.000489484 Jy ! Component: 150 - total flux cleaned = 0.00055891 Jy ! Component: 200 - total flux cleaned = 0.000650849 Jy ! Total flux subtracted in 200 components = 0.000650849 Jy ! Clean residual min=-0.005316 max=0.006370 Jy/beam ! Clean residual mean=-0.000045 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.612294 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.612294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068063Jy sigma=1.019647 ! Fit after self-cal, rms=0.067720Jy sigma=1.015583 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.192 x 8.12 at -0.9693 degrees (North through East) ! Clean map min=-0.0051215 max=0.58183 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067720Jy sigma=1.015583 ! Fit after self-cal, rms=0.064804Jy sigma=0.957388 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064804Jy sigma=0.957388 ! Fit after self-cal, rms=0.064818Jy sigma=0.956624 ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.128 mas, bpa=-1.009 degrees ! Estimated noise=1.58365 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265938 Jy ! Component: 100 - total flux cleaned = 0.000366012 Jy ! Component: 150 - total flux cleaned = 0.000422291 Jy ! Component: 200 - total flux cleaned = 0.000496542 Jy ! Total flux subtracted in 200 components = 0.000496542 Jy ! Clean residual min=-0.005273 max=0.005688 Jy/beam ! Clean residual mean=-0.000027 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.612791 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.612791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064816Jy sigma=0.956161 ! Fit after self-cal, rms=0.064871Jy sigma=0.955923 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064871Jy sigma=0.955923 ! Fit after self-cal, rms=0.063414Jy sigma=0.933987 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063414Jy sigma=0.933987 ! Fit after self-cal, rms=0.063464Jy sigma=0.933915 ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.13 mas, bpa=-1.009 degrees ! Estimated noise=1.58576 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102425 Jy ! Component: 100 - total flux cleaned = 0.00107605 Jy ! Component: 150 - total flux cleaned = 0.00112334 Jy ! Component: 200 - total flux cleaned = 0.00116678 Jy ! Total flux subtracted in 200 components = 0.00116678 Jy ! Clean residual min=-0.005272 max=0.005564 Jy/beam ! Clean residual mean=-0.000023 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.613958 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.613958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063442Jy sigma=0.933474 ! Fit after self-cal, rms=0.063478Jy sigma=0.933428 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.51 mas, bmaj=14.99 mas, bpa=4.797 degrees ! Estimated noise=2.00543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823778 Jy ! Component: 100 - total flux cleaned = 0.000887719 Jy ! Component: 150 - total flux cleaned = 0.000938208 Jy ! Component: 200 - total flux cleaned = 0.00100246 Jy ! Total flux subtracted in 200 components = 0.00100246 Jy ! Clean residual min=-0.005769 max=0.006215 Jy/beam ! Clean residual mean=-0.000053 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.61496 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.61496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063474Jy sigma=0.933530 ! Fit after self-cal, rms=0.063484Jy sigma=0.933352 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=6.81 mas, bpa=-0.325 degrees ! Estimated noise=1.96477 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.504925 Jy ! Component: 100 - total flux cleaned = 0.574898 Jy ! Component: 150 - total flux cleaned = 0.596753 Jy ! Component: 200 - total flux cleaned = 0.606678 Jy ! Total flux subtracted in 200 components = 0.606678 Jy ! Clean residual min=-0.006385 max=0.006686 Jy/beam ! Clean residual mean=-0.000014 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.606677 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.606677 Jy ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.13 mas, bpa=-1.009 degrees ! Estimated noise=1.58576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444937 Jy ! Component: 100 - total flux cleaned = 0.00562627 Jy ! Component: 150 - total flux cleaned = 0.00597433 Jy ! Component: 200 - total flux cleaned = 0.00622681 Jy ! Total flux subtracted in 200 components = 0.00622681 Jy ! Clean residual min=-0.005423 max=0.005875 Jy/beam ! Clean residual mean=-0.000023 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.612904 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 0.612904 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.51 mas, bmaj=14.99 mas, bpa=4.797 degrees ! Estimated noise=2.00543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137038 Jy ! Component: 100 - total flux cleaned = 0.00147247 Jy ! Component: 150 - total flux cleaned = 0.00159546 Jy ! Component: 200 - total flux cleaned = 0.00168009 Jy ! Total flux subtracted in 200 components = 0.00168009 Jy ! Clean residual min=-0.005784 max=0.006296 Jy/beam ! Clean residual mean=-0.000053 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.614584 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.614584 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.13 mas, bpa=-1.009 degrees ! Estimated noise=1.58576 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227593 Jy ! Component: 100 - total flux cleaned = -0.000228177 Jy ! Component: 150 - total flux cleaned = -0.000256072 Jy ! Component: 200 - total flux cleaned = -0.00028105 Jy ! Total flux subtracted in 200 components = -0.00028105 Jy ! Clean residual min=-0.005316 max=0.005713 Jy/beam ! Clean residual mean=-0.000025 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.614303 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.614303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063493Jy sigma=0.933729 ! Fit after self-cal, rms=0.063481Jy sigma=0.933605 wmodel J2358-1020_S_2004_05_27_yyk\_map.mod ! Writing 64 model components to file: J2358-1020_S_2004_05_27_yyk_map.mod wobs J2358-1020_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2358-1020_S_2004_05_27_yyk_uvs.fits wwins J2358-1020_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J2358-1020_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151221 Jy ! Component: 100 - total flux cleaned = 0.00282179 Jy ! Component: 150 - total flux cleaned = 0.00346397 Jy ! Component: 200 - total flux cleaned = 0.00390983 Jy ! Component: 250 - total flux cleaned = 0.00453505 Jy ! Component: 300 - total flux cleaned = 0.00525546 Jy ! Component: 350 - total flux cleaned = 0.0058763 Jy ! Component: 400 - total flux cleaned = 0.00646939 Jy ! Component: 450 - total flux cleaned = 0.00686771 Jy ! Component: 500 - total flux cleaned = 0.00719703 Jy ! Component: 550 - total flux cleaned = 0.00746247 Jy ! Component: 600 - total flux cleaned = 0.00787191 Jy ! Component: 650 - total flux cleaned = 0.00802017 Jy ! Component: 700 - total flux cleaned = 0.0082617 Jy ! Component: 750 - total flux cleaned = 0.00868144 Jy ! Component: 800 - total flux cleaned = 0.00899697 Jy ! Component: 850 - total flux cleaned = 0.00921765 Jy ! Component: 900 - total flux cleaned = 0.00947477 Jy ! Component: 950 - total flux cleaned = 0.00959966 Jy ! Component: 1000 - total flux cleaned = 0.00959872 Jy ! Component: 1050 - total flux cleaned = 0.00987899 Jy ! Component: 1100 - total flux cleaned = 0.00987862 Jy ! Component: 1150 - total flux cleaned = 0.00995489 Jy ! Component: 1200 - total flux cleaned = 0.00999259 Jy ! Component: 1250 - total flux cleaned = 0.00999329 Jy ! Component: 1300 - total flux cleaned = 0.0100666 Jy ! Component: 1350 - total flux cleaned = 0.0101024 Jy ! Component: 1400 - total flux cleaned = 0.0101377 Jy ! Component: 1450 - total flux cleaned = 0.0102405 Jy ! Component: 1500 - total flux cleaned = 0.0102742 Jy ! Component: 1550 - total flux cleaned = 0.0102737 Jy ! Component: 1600 - total flux cleaned = 0.010339 Jy ! Component: 1650 - total flux cleaned = 0.0102742 Jy ! Component: 1700 - total flux cleaned = 0.0103371 Jy ! Component: 1750 - total flux cleaned = 0.010306 Jy ! Component: 1800 - total flux cleaned = 0.0103982 Jy ! Component: 1850 - total flux cleaned = 0.0103674 Jy ! Component: 1900 - total flux cleaned = 0.0103672 Jy ! Component: 1950 - total flux cleaned = 0.0103671 Jy ! Component: 2000 - total flux cleaned = 0.0103381 Jy ! Total flux subtracted in 2048 components = 0.0103964 Jy ! Clean residual min=-0.001657 max=0.001606 Jy/beam ! Clean residual mean=-0.000014 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.6247 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 196 components and 0.624699 Jy ![Exited script file: muppet] wmap "J2358-1020_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.193 x 8.13 at -1.009 degrees (North through East) ! Clean map min=-0.0026126 max=0.58213 Jy/beam ! Writing clean map to FITS file: J2358-1020_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.582129 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000585556 device "J2358-1020_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2358-1020_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.301766 0.301766 0.603532 1.20706 2.41413 4.82826 9.65651 19.313 38.626 77.2521 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.582 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.193 x 8.13 at -1.009 degrees (North through East) ! Clean map min=-0.0026126 max=0.58213 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2358-1020_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2358-1020_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2358-1020_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 01:00:52 2005