! Started logfile: J2353-3037_S_2004_04_30_yyk_uvs.log on Wed Dec 7 01:00:36 2005 obs J2353-3037_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J2353-3037_S_2004_04_30_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.511111 visibilities/baseline/integration-bin. ! Found source: J2353-3037 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1633 lines of history. ! ! Reading 460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2353-3037_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.160611 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.880303Jy sigma=11.897238 ! Fit after self-cal, rms=0.879192Jy sigma=11.883140 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.343 mas, bmaj=6.28 mas, bpa=-2.195 degrees ! Estimated noise=4.81819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.101775 Jy ! Component: 100 - total flux cleaned = 0.130883 Jy ! Total flux subtracted in 100 components = 0.130883 Jy ! Clean residual min=-0.015091 max=0.016977 Jy/beam ! Clean residual mean=0.000372 rms=0.004709 Jy/beam ! Combined flux in latest and established models = 0.130883 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.130883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095677Jy sigma=1.167595 ! Fit after self-cal, rms=0.095585Jy sigma=1.166437 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=8.084 mas, bpa=-6.292 degrees ! Estimated noise=2.87873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199821 Jy ! Component: 100 - total flux cleaned = 0.0264737 Jy ! Component: 150 - total flux cleaned = 0.0286969 Jy ! Component: 200 - total flux cleaned = 0.02888 Jy ! Total flux subtracted in 200 components = 0.02888 Jy ! Clean residual min=-0.011301 max=0.015391 Jy/beam ! Clean residual mean=0.000361 rms=0.004696 Jy/beam ! Combined flux in latest and established models = 0.159763 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 0.159763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093108Jy sigma=1.126238 ! Fit after self-cal, rms=0.093159Jy sigma=1.125955 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.997221 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 1.02 MK 0.92 NL 1.13 OV 0.94 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.093159Jy sigma=1.125955 ! Fit after self-cal, rms=0.093082Jy sigma=1.123365 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093082Jy sigma=1.123365 ! Fit after self-cal, rms=0.093080Jy sigma=1.123149 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=8.042 mas, bpa=-6.724 degrees ! Estimated noise=2.86811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155481 Jy ! Component: 100 - total flux cleaned = 0.00144392 Jy ! Component: 150 - total flux cleaned = 0.00135257 Jy ! Component: 200 - total flux cleaned = 0.00123525 Jy ! Total flux subtracted in 200 components = 0.00123525 Jy ! Clean residual min=-0.010696 max=0.014556 Jy/beam ! Clean residual mean=0.000384 rms=0.004658 Jy/beam ! Combined flux in latest and established models = 0.160998 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.160998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093011Jy sigma=1.122288 ! Fit after self-cal, rms=0.093015Jy sigma=1.122155 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093015Jy sigma=1.122155 ! Fit after self-cal, rms=0.085154Jy sigma=1.021067 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299578 Jy ! Component: 100 - total flux cleaned = 0.00276177 Jy ! Component: 150 - total flux cleaned = 0.00270071 Jy ! Component: 200 - total flux cleaned = 0.00264562 Jy ! Total flux subtracted in 200 components = 0.00264562 Jy ! Clean residual min=-0.010058 max=0.015285 Jy/beam ! Clean residual mean=0.000417 rms=0.004548 Jy/beam ! Combined flux in latest and established models = 0.163644 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.163644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085169Jy sigma=1.018610 ! Fit after self-cal, rms=0.084462Jy sigma=1.010283 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.891 x 8.042 at -6.724 degrees (North through East) ! Clean map min=-0.0097802 max=0.12655 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084462Jy sigma=1.010283 ! Fit after self-cal, rms=0.084655Jy sigma=1.012929 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084655Jy sigma=1.012929 ! Fit after self-cal, rms=0.084583Jy sigma=1.012062 ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=8.002 mas, bpa=-6.846 degrees ! Estimated noise=2.87719 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142261 Jy ! Component: 100 - total flux cleaned = 0.0014227 Jy ! Component: 150 - total flux cleaned = 0.00142394 Jy ! Component: 200 - total flux cleaned = 0.00137707 Jy ! Total flux subtracted in 200 components = 0.00137707 Jy ! Clean residual min=-0.010315 max=0.015014 Jy/beam ! Clean residual mean=0.000391 rms=0.004379 Jy/beam ! Combined flux in latest and established models = 0.165021 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.165021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084497Jy sigma=1.011250 ! Fit after self-cal, rms=0.084481Jy sigma=1.011121 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084481Jy sigma=1.011121 ! Fit after self-cal, rms=0.084983Jy sigma=1.008133 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084983Jy sigma=1.008133 ! Fit after self-cal, rms=0.084979Jy sigma=1.008105 ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.978 mas, bpa=-6.742 degrees ! Estimated noise=2.89078 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000964624 Jy ! Component: 100 - total flux cleaned = 0.00101281 Jy ! Component: 150 - total flux cleaned = 0.00100741 Jy ! Component: 200 - total flux cleaned = 0.00100364 Jy ! Total flux subtracted in 200 components = 0.00100364 Jy ! Clean residual min=-0.010199 max=0.015004 Jy/beam ! Clean residual mean=0.000417 rms=0.004400 Jy/beam ! Combined flux in latest and established models = 0.166025 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.166025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084931Jy sigma=1.007459 ! Fit after self-cal, rms=0.084927Jy sigma=1.007446 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.151 mas, bmaj=29.47 mas, bpa=-4.962 degrees ! Estimated noise=3.87172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152095 Jy ! Component: 100 - total flux cleaned = 0.00152374 Jy ! Component: 150 - total flux cleaned = 0.00152584 Jy ! Component: 200 - total flux cleaned = 0.00152779 Jy ! Total flux subtracted in 200 components = 0.00152779 Jy ! Clean residual min=-0.012982 max=0.020052 Jy/beam ! Clean residual mean=0.000846 rms=0.007552 Jy/beam ! Combined flux in latest and established models = 0.167552 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 62 components and 0.167552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085024Jy sigma=1.008432 ! Fit after self-cal, rms=0.084955Jy sigma=1.007977 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.338 mas, bmaj=6.256 mas, bpa=-2.342 degrees ! Estimated noise=4.81869 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.107939 Jy ! Component: 100 - total flux cleaned = 0.137583 Jy ! Component: 150 - total flux cleaned = 0.153641 Jy ! Component: 200 - total flux cleaned = 0.162512 Jy ! Total flux subtracted in 200 components = 0.162512 Jy ! Clean residual min=-0.015296 max=0.016065 Jy/beam ! Clean residual mean=0.000245 rms=0.004381 Jy/beam ! Combined flux in latest and established models = 0.162512 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.162512 Jy ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.978 mas, bpa=-6.742 degrees ! Estimated noise=2.89078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260033 Jy ! Component: 100 - total flux cleaned = 0.00305356 Jy ! Component: 150 - total flux cleaned = 0.00330672 Jy ! Component: 200 - total flux cleaned = 0.00350989 Jy ! Total flux subtracted in 200 components = 0.00350989 Jy ! Clean residual min=-0.010486 max=0.014987 Jy/beam ! Clean residual mean=0.000416 rms=0.004496 Jy/beam ! Combined flux in latest and established models = 0.166022 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.166022 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.151 mas, bmaj=29.47 mas, bpa=-4.962 degrees ! Estimated noise=3.87172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147865 Jy ! Component: 100 - total flux cleaned = 0.00148088 Jy ! Component: 150 - total flux cleaned = 0.00148369 Jy ! Component: 200 - total flux cleaned = 0.00148576 Jy ! Total flux subtracted in 200 components = 0.00148576 Jy ! Clean residual min=-0.012143 max=0.019778 Jy/beam ! Clean residual mean=0.000843 rms=0.007665 Jy/beam ! Combined flux in latest and established models = 0.167508 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.167508 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.978 mas, bpa=-6.742 degrees ! Estimated noise=2.89078 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117419 Jy ! Component: 100 - total flux cleaned = -0.00107067 Jy ! Component: 150 - total flux cleaned = -0.000997292 Jy ! Component: 200 - total flux cleaned = -0.000937879 Jy ! Total flux subtracted in 200 components = -0.000937879 Jy ! Clean residual min=-0.010218 max=0.014724 Jy/beam ! Clean residual mean=0.000412 rms=0.004382 Jy/beam ! Combined flux in latest and established models = 0.16657 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.16657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084859Jy sigma=1.006892 ! Fit after self-cal, rms=0.084868Jy sigma=1.006649 wmodel J2353-3037_S_2004_04_30_yyk\_map.mod ! Writing 50 model components to file: J2353-3037_S_2004_04_30_yyk_map.mod wobs J2353-3037_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J2353-3037_S_2004_04_30_yyk_uvs.fits wwins J2353-3037_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J2353-3037_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639934 Jy ! Component: 100 - total flux cleaned = 0.0116297 Jy ! Component: 150 - total flux cleaned = 0.0143788 Jy ! Component: 200 - total flux cleaned = 0.0150278 Jy ! Component: 250 - total flux cleaned = 0.0153119 Jy ! Component: 300 - total flux cleaned = 0.0146482 Jy ! Component: 350 - total flux cleaned = 0.0136581 Jy ! Component: 400 - total flux cleaned = 0.0127284 Jy ! Component: 450 - total flux cleaned = 0.0118451 Jy ! Component: 500 - total flux cleaned = 0.0108039 Jy ! Component: 550 - total flux cleaned = 0.00952296 Jy ! Component: 600 - total flux cleaned = 0.00820103 Jy ! Component: 650 - total flux cleaned = 0.00711291 Jy ! Component: 700 - total flux cleaned = 0.00641608 Jy ! Component: 750 - total flux cleaned = 0.0059949 Jy ! Component: 800 - total flux cleaned = 0.00541797 Jy ! Component: 850 - total flux cleaned = 0.00485464 Jy ! Component: 900 - total flux cleaned = 0.00430346 Jy ! Component: 950 - total flux cleaned = 0.00399272 Jy ! Component: 1000 - total flux cleaned = 0.00345722 Jy ! Component: 1050 - total flux cleaned = 0.00308017 Jy ! Component: 1100 - total flux cleaned = 0.00270653 Jy ! Component: 1150 - total flux cleaned = 0.00248372 Jy ! Component: 1200 - total flux cleaned = 0.00218875 Jy ! Component: 1250 - total flux cleaned = 0.00189521 Jy ! Component: 1300 - total flux cleaned = 0.00167522 Jy ! Component: 1350 - total flux cleaned = 0.00152747 Jy ! Component: 1400 - total flux cleaned = 0.00137981 Jy ! Component: 1450 - total flux cleaned = 0.00123266 Jy ! Component: 1500 - total flux cleaned = 0.00108483 Jy ! Component: 1550 - total flux cleaned = 0.000935269 Jy ! Component: 1600 - total flux cleaned = 0.000784669 Jy ! Component: 1650 - total flux cleaned = 0.000785227 Jy ! Component: 1700 - total flux cleaned = 0.000784194 Jy ! Component: 1750 - total flux cleaned = 0.000943502 Jy ! Component: 1800 - total flux cleaned = 0.00110443 Jy ! Component: 1850 - total flux cleaned = 0.00118726 Jy ! Component: 1900 - total flux cleaned = 0.00127117 Jy ! Component: 1950 - total flux cleaned = 0.00144288 Jy ! Component: 2000 - total flux cleaned = 0.00161924 Jy ! Total flux subtracted in 2048 components = 0.00179926 Jy ! Clean residual min=-0.005122 max=0.005469 Jy/beam ! Clean residual mean=-0.000053 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.168369 Jy keep ! Adding 102 model components to the UV plane model. ! The established model now contains 152 components and 0.168369 Jy ![Exited script file: muppet] wmap "J2353-3037_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.87 x 7.978 at -6.742 degrees (North through East) ! Clean map min=-0.011608 max=0.13077 Jy/beam ! Writing clean map to FITS file: J2353-3037_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130768 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00145118 device "J2353-3037_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2353-3037_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.32922 3.32922 6.65845 13.3169 26.6338 53.2676 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.87 x 7.978 at -6.742 degrees (North through East) ! Clean map min=-0.011608 max=0.13077 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2353-3037_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2353-3037_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2353-3037_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 01:00:40 2005