! Started logfile: J2333-2343_X_2004_04_30_yyk_uvs.log on Wed Dec 7 01:07:05 2005 obs J2333-2343_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J2333-2343_X_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2333-2343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1546 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2333-2343_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.403528 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.632091Jy sigma=10.639855 ! Fit after self-cal, rms=0.632088Jy sigma=10.638573 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6917 mas, bmaj=1.933 mas, bpa=-9.244 degrees ! Estimated noise=2.13585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.316817 Jy ! Component: 100 - total flux cleaned = 0.398371 Jy ! Total flux subtracted in 100 components = 0.398371 Jy ! Clean residual min=-0.018004 max=0.030139 Jy/beam ! Clean residual mean=-0.000023 rms=0.005140 Jy/beam ! Combined flux in latest and established models = 0.398371 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.398371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103645Jy sigma=1.706790 ! Fit after self-cal, rms=0.103019Jy sigma=1.700087 ! Inverting map ! Added new window around map position (1, -0.6). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417119 Jy ! Component: 100 - total flux cleaned = 0.0639722 Jy ! Total flux subtracted in 100 components = 0.0639722 Jy ! Clean residual min=-0.013725 max=0.015720 Jy/beam ! Clean residual mean=-0.000039 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.462343 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.462343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085006Jy sigma=1.352013 ! Fit after self-cal, rms=0.084180Jy sigma=1.339580 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8496 mas, bmaj=2.18 mas, bpa=-7.362 degrees ! Estimated noise=1.55429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246082 Jy ! Component: 100 - total flux cleaned = 0.0359387 Jy ! Component: 150 - total flux cleaned = 0.0402036 Jy ! Component: 200 - total flux cleaned = 0.0417508 Jy ! Total flux subtracted in 200 components = 0.0417508 Jy ! Clean residual min=-0.015191 max=0.021886 Jy/beam ! Clean residual mean=-0.000108 rms=0.004441 Jy/beam ! Combined flux in latest and established models = 0.504094 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 0.504094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079687Jy sigma=1.246613 ! Fit after self-cal, rms=0.079136Jy sigma=1.237879 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.998764 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.05 KP 0.96 ! LA 0.96 MK 0.99 NL 1.03 OV 1.04 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00494 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.04 KP 0.93 ! LA 0.94 MK 0.98 NL 1.00 OV 0.99 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00698 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 HN 0.89 KP 0.88 ! LA 0.91 MK 0.99 NL 1.02 OV 1.07 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.984916 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.11 HN 1.00 KP 0.91 ! LA 0.93 MK 1.02 NL 1.02 OV 1.05 ! PT 1.06 SC 0.98 ! ! ! Fit before self-cal, rms=0.079136Jy sigma=1.237879 ! Fit after self-cal, rms=0.074422Jy sigma=1.142367 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074422Jy sigma=1.142367 ! Fit after self-cal, rms=0.074454Jy sigma=1.142261 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.85 mas, bmaj=2.189 mas, bpa=-7.455 degrees ! Estimated noise=1.5461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.4, -3.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214148 Jy ! Component: 100 - total flux cleaned = 0.0266819 Jy ! Component: 150 - total flux cleaned = 0.02876 Jy ! Component: 200 - total flux cleaned = 0.0298469 Jy ! Total flux subtracted in 200 components = 0.0298469 Jy ! Clean residual min=-0.007370 max=0.010719 Jy/beam ! Clean residual mean=-0.000033 rms=0.002459 Jy/beam ! Combined flux in latest and established models = 0.533941 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 66 components and 0.533941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070686Jy sigma=1.061334 ! Fit after self-cal, rms=0.070536Jy sigma=1.059559 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070536Jy sigma=1.059559 ! Fit after self-cal, rms=0.069419Jy sigma=1.038775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229963 Jy ! Component: 100 - total flux cleaned = 0.00312931 Jy ! Component: 150 - total flux cleaned = 0.00329947 Jy ! Component: 200 - total flux cleaned = 0.00337817 Jy ! Total flux subtracted in 200 components = 0.00337817 Jy ! Clean residual min=-0.007074 max=0.010355 Jy/beam ! Clean residual mean=-0.000030 rms=0.002427 Jy/beam ! Combined flux in latest and established models = 0.537319 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.537319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069236Jy sigma=1.034965 ! Fit after self-cal, rms=0.069160Jy sigma=1.033281 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.85 x 2.189 at -7.455 degrees (North through East) ! Clean map min=-0.0068145 max=0.36274 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069160Jy sigma=1.033281 ! Fit after self-cal, rms=0.068682Jy sigma=1.025627 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068682Jy sigma=1.025627 ! Fit after self-cal, rms=0.068681Jy sigma=1.025523 ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=2.187 mas, bpa=-7.445 degrees ! Estimated noise=1.54155 mJy/beam. ! Added new window around map position (-2.6, 11.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118804 Jy ! Component: 100 - total flux cleaned = 0.0180503 Jy ! Component: 150 - total flux cleaned = 0.0222496 Jy ! Component: 200 - total flux cleaned = 0.0249578 Jy ! Total flux subtracted in 200 components = 0.0249578 Jy ! Clean residual min=-0.005766 max=0.006841 Jy/beam ! Clean residual mean=-0.000021 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 0.562277 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 111 components and 0.562277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067441Jy sigma=0.994407 ! Fit after self-cal, rms=0.067357Jy sigma=0.992966 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067357Jy sigma=0.992966 ! Fit after self-cal, rms=0.065763Jy sigma=0.970453 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065763Jy sigma=0.970453 ! Fit after self-cal, rms=0.065765Jy sigma=0.970439 ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=2.189 mas, bpa=-7.459 degrees ! Estimated noise=1.53954 mJy/beam. ! Added new window around map position (32.6, -50). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00817393 Jy ! Component: 100 - total flux cleaned = 0.0118505 Jy ! Component: 150 - total flux cleaned = 0.0130766 Jy ! Component: 200 - total flux cleaned = 0.0141214 Jy ! Total flux subtracted in 200 components = 0.0141214 Jy ! Clean residual min=-0.005337 max=0.006425 Jy/beam ! Clean residual mean=-0.000002 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.576398 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 143 components and 0.576398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065126Jy sigma=0.955037 ! Fit after self-cal, rms=0.065083Jy sigma=0.954316 ! Inverting map ! Added new window around map position (19, 19.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683288 Jy ! Component: 100 - total flux cleaned = 0.00933065 Jy ! Component: 150 - total flux cleaned = 0.0107159 Jy ! Component: 200 - total flux cleaned = 0.0116415 Jy ! Total flux subtracted in 200 components = 0.0116415 Jy ! Clean residual min=-0.005121 max=0.004674 Jy/beam ! Clean residual mean=-0.000007 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.58804 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 170 components and 0.58804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064643Jy sigma=0.942897 ! Fit after self-cal, rms=0.064616Jy sigma=0.942585 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=5.056 mas, bpa=-6.903 degrees ! Estimated noise=2.04154 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265056 Jy ! Component: 100 - total flux cleaned = 0.00386407 Jy ! Component: 150 - total flux cleaned = 0.00449323 Jy ! Component: 200 - total flux cleaned = 0.00485124 Jy ! Total flux subtracted in 200 components = 0.00485124 Jy ! Clean residual min=-0.006826 max=0.006086 Jy/beam ! Clean residual mean=-0.000011 rms=0.001716 Jy/beam ! Combined flux in latest and established models = 0.592891 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 190 components and 0.592891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064572Jy sigma=0.941535 ! Fit after self-cal, rms=0.064563Jy sigma=0.941418 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6922 mas, bmaj=1.935 mas, bpa=-9.275 degrees ! Estimated noise=2.12381 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.315944 Jy ! Component: 100 - total flux cleaned = 0.400112 Jy ! Component: 150 - total flux cleaned = 0.44111 Jy ! Component: 200 - total flux cleaned = 0.465879 Jy ! Total flux subtracted in 200 components = 0.465879 Jy ! Clean residual min=-0.009160 max=0.011074 Jy/beam ! Clean residual mean=-0.000018 rms=0.002708 Jy/beam ! Combined flux in latest and established models = 0.465879 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.465879 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=2.189 mas, bpa=-7.459 degrees ! Estimated noise=1.53954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267265 Jy ! Component: 100 - total flux cleaned = 0.044217 Jy ! Component: 150 - total flux cleaned = 0.0577009 Jy ! Component: 200 - total flux cleaned = 0.0685008 Jy ! Total flux subtracted in 200 components = 0.0685008 Jy ! Clean residual min=-0.007044 max=0.007158 Jy/beam ! Clean residual mean=-0.000033 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.53438 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 78 components and 0.53438 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=5.056 mas, bpa=-6.903 degrees ! Estimated noise=2.04154 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152899 Jy ! Component: 100 - total flux cleaned = 0.0258648 Jy ! Component: 150 - total flux cleaned = 0.0339393 Jy ! Component: 200 - total flux cleaned = 0.0402493 Jy ! Total flux subtracted in 200 components = 0.0402493 Jy ! Clean residual min=-0.007149 max=0.005611 Jy/beam ! Clean residual mean=-0.000028 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 0.574629 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 135 components and 0.57463 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8502 mas, bmaj=2.189 mas, bpa=-7.459 degrees ! Estimated noise=1.53954 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394914 Jy ! Component: 100 - total flux cleaned = 0.00630941 Jy ! Component: 150 - total flux cleaned = 0.00801995 Jy ! Component: 200 - total flux cleaned = 0.00938656 Jy ! Total flux subtracted in 200 components = 0.00938656 Jy ! Clean residual min=-0.004849 max=0.004674 Jy/beam ! Clean residual mean=-0.000013 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.584016 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 166 components and 0.584016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064922Jy sigma=0.945934 ! Fit after self-cal, rms=0.064849Jy sigma=0.945034 wmodel J2333-2343_X_2004_04_30_yyk\_map.mod ! Writing 166 model components to file: J2333-2343_X_2004_04_30_yyk_map.mod wobs J2333-2343_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J2333-2343_X_2004_04_30_yyk_uvs.fits wwins J2333-2343_X_2004_04_30_yyk\_map.win ! wwins: Wrote 6 windows to J2333-2343_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00055295 Jy ! Component: 100 - total flux cleaned = -0.001132 Jy ! Component: 150 - total flux cleaned = -0.00175901 Jy ! Component: 200 - total flux cleaned = -0.00227961 Jy ! Component: 250 - total flux cleaned = -0.00249037 Jy ! Component: 300 - total flux cleaned = -0.00262428 Jy ! Component: 350 - total flux cleaned = -0.00288622 Jy ! Component: 400 - total flux cleaned = -0.00295128 Jy ! Component: 450 - total flux cleaned = -0.00301283 Jy ! Component: 500 - total flux cleaned = -0.00307116 Jy ! Component: 550 - total flux cleaned = -0.00295477 Jy ! Component: 600 - total flux cleaned = -0.00278523 Jy ! Component: 650 - total flux cleaned = -0.00256309 Jy ! Component: 700 - total flux cleaned = -0.00250824 Jy ! Component: 750 - total flux cleaned = -0.00214119 Jy ! Component: 800 - total flux cleaned = -0.00203794 Jy ! Component: 850 - total flux cleaned = -0.00188642 Jy ! Component: 900 - total flux cleaned = -0.00168794 Jy ! Component: 950 - total flux cleaned = -0.00168748 Jy ! Component: 1000 - total flux cleaned = -0.00140069 Jy ! Component: 1050 - total flux cleaned = -0.00126101 Jy ! Component: 1100 - total flux cleaned = -0.00112382 Jy ! Component: 1150 - total flux cleaned = -0.000944824 Jy ! Component: 1200 - total flux cleaned = -0.000768384 Jy ! Component: 1250 - total flux cleaned = -0.000593983 Jy ! Component: 1300 - total flux cleaned = -0.000294265 Jy ! Component: 1350 - total flux cleaned = -0.000294259 Jy ! Component: 1400 - total flux cleaned = -4.45174e-05 Jy ! Component: 1450 - total flux cleaned = -4.47421e-05 Jy ! Component: 1500 - total flux cleaned = -5.40163e-06 Jy ! Component: 1550 - total flux cleaned = -8.51883e-05 Jy ! Component: 1600 - total flux cleaned = -8.50819e-05 Jy ! Component: 1650 - total flux cleaned = -4.62141e-05 Jy ! Component: 1700 - total flux cleaned = -8.31533e-06 Jy ! Component: 1750 - total flux cleaned = -0.000198016 Jy ! Component: 1800 - total flux cleaned = -0.000123016 Jy ! Component: 1850 - total flux cleaned = -0.00019786 Jy ! Component: 1900 - total flux cleaned = -0.00034437 Jy ! Component: 1950 - total flux cleaned = -0.000380453 Jy ! Component: 2000 - total flux cleaned = -0.000416784 Jy ! Component: 2050 - total flux cleaned = -0.00066592 Jy ! Component: 2100 - total flux cleaned = -0.000700694 Jy ! Component: 2150 - total flux cleaned = -0.000700608 Jy ! Component: 2200 - total flux cleaned = -0.000804741 Jy ! Component: 2250 - total flux cleaned = -0.000907827 Jy ! Component: 2300 - total flux cleaned = -0.00100977 Jy ! Component: 2350 - total flux cleaned = -0.00100992 Jy ! Component: 2400 - total flux cleaned = -0.00111068 Jy ! Component: 2450 - total flux cleaned = -0.00114434 Jy ! Component: 2500 - total flux cleaned = -0.0013097 Jy ! Component: 2550 - total flux cleaned = -0.00130999 Jy ! Component: 2600 - total flux cleaned = -0.00153773 Jy ! Component: 2650 - total flux cleaned = -0.00153726 Jy ! Component: 2700 - total flux cleaned = -0.00166541 Jy ! Component: 2750 - total flux cleaned = -0.00172924 Jy ! Component: 2800 - total flux cleaned = -0.00179281 Jy ! Component: 2850 - total flux cleaned = -0.0018555 Jy ! Component: 2900 - total flux cleaned = -0.00204311 Jy ! Component: 2950 - total flux cleaned = -0.00213577 Jy ! Component: 3000 - total flux cleaned = -0.00213565 Jy ! Component: 3050 - total flux cleaned = -0.00213565 Jy ! Component: 3100 - total flux cleaned = -0.00228837 Jy ! Component: 3150 - total flux cleaned = -0.0023792 Jy ! Component: 3200 - total flux cleaned = -0.00252995 Jy ! Component: 3250 - total flux cleaned = -0.00264991 Jy ! Component: 3300 - total flux cleaned = -0.00279864 Jy ! Component: 3350 - total flux cleaned = -0.00285805 Jy ! Component: 3400 - total flux cleaned = -0.00297575 Jy ! Component: 3450 - total flux cleaned = -0.00309311 Jy ! Component: 3500 - total flux cleaned = -0.00329705 Jy ! Component: 3550 - total flux cleaned = -0.00341238 Jy ! Component: 3600 - total flux cleaned = -0.00355641 Jy ! Component: 3650 - total flux cleaned = -0.00364237 Jy ! Component: 3700 - total flux cleaned = -0.00378522 Jy ! Component: 3750 - total flux cleaned = -0.00401239 Jy ! Component: 3800 - total flux cleaned = -0.00418185 Jy ! Component: 3850 - total flux cleaned = -0.00429433 Jy ! Component: 3900 - total flux cleaned = -0.00449015 Jy ! Component: 3950 - total flux cleaned = -0.00476885 Jy ! Component: 4000 - total flux cleaned = -0.00493542 Jy ! Component: 4050 - total flux cleaned = -0.00504578 Jy ! Total flux subtracted in 4096 components = -0.00523836 Jy ! Clean residual min=-0.002083 max=0.001928 Jy/beam ! Clean residual mean=-0.000004 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.578778 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 413 components and 0.578778 Jy ![Exited script file: muppet] wmap "J2333-2343_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8502 x 2.189 at -7.459 degrees (North through East) ! Clean map min=-0.0029164 max=0.36348 Jy/beam ! Writing clean map to FITS file: J2333-2343_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.363482 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000429114 device "J2333-2343_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2333-2343_X_2004_04_30_yyk_map.eps/VPS' loglevs 1*100*3*image_rms/peak_flux ! The new contour levels are: ! -0.354169 0.354169 0.708338 1.41668 2.83335 5.6667 11.3334 22.6668 45.3336 90.6672 print "clev=",int(1*3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.363 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8502 x 2.189 at -7.459 degrees (North through East) ! Clean map min=-0.0029164 max=0.36348 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2333-2343_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2333-2343_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2333-2343_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 01:07:31 2005