! Started logfile: J2333-2343_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:59:47 2005 obs J2333-2343_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J2333-2343_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2333-2343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1629 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2333-2343_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.398195 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.643215Jy sigma=9.806889 ! Fit after self-cal, rms=0.643046Jy sigma=9.804531 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=7.059 mas, bpa=-11.77 degrees ! Estimated noise=2.52305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.321156 Jy ! Component: 100 - total flux cleaned = 0.399712 Jy ! Total flux subtracted in 100 components = 0.399712 Jy ! Clean residual min=-0.024293 max=0.037178 Jy/beam ! Clean residual mean=-0.000036 rms=0.007883 Jy/beam ! Combined flux in latest and established models = 0.399712 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.399712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111857Jy sigma=1.744930 ! Fit after self-cal, rms=0.111245Jy sigma=1.739337 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.218 mas, bmaj=8.265 mas, bpa=-9.963 degrees ! Estimated noise=1.84102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397395 Jy ! Component: 100 - total flux cleaned = 0.0565777 Jy ! Component: 150 - total flux cleaned = 0.0638265 Jy ! Component: 200 - total flux cleaned = 0.065255 Jy ! Total flux subtracted in 200 components = 0.065255 Jy ! Clean residual min=-0.023748 max=0.042122 Jy/beam ! Clean residual mean=0.000438 rms=0.008681 Jy/beam ! Combined flux in latest and established models = 0.464967 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 29 components and 0.464967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102198Jy sigma=1.589898 ! Fit after self-cal, rms=0.102072Jy sigma=1.589485 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00377 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.05 HN 1.09 KP 0.86 ! LA 1.06 MK 0.95 NL 1.03 OV 1.02 ! PT 0.89 SC 0.89 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.996202 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.19 KP 0.90 ! LA 1.03 MK 0.96 NL 1.12 OV 0.99 ! PT 0.86 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.102072Jy sigma=1.589485 ! Fit after self-cal, rms=0.098593Jy sigma=1.486197 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098593Jy sigma=1.486197 ! Fit after self-cal, rms=0.098642Jy sigma=1.486036 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=8.167 mas, bpa=-9.367 degrees ! Estimated noise=1.81306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00535573 Jy ! Component: 100 - total flux cleaned = -0.00573895 Jy ! Component: 150 - total flux cleaned = -0.00590759 Jy ! Component: 200 - total flux cleaned = -0.00591162 Jy ! Total flux subtracted in 200 components = -0.00591162 Jy ! Clean residual min=-0.017830 max=0.033782 Jy/beam ! Clean residual mean=0.000394 rms=0.006926 Jy/beam ! Combined flux in latest and established models = 0.459055 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.459055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098382Jy sigma=1.477040 ! Fit after self-cal, rms=0.098338Jy sigma=1.476781 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098338Jy sigma=1.476781 ! Fit after self-cal, rms=0.096624Jy sigma=1.453351 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -11.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375918 Jy ! Component: 100 - total flux cleaned = 0.0496205 Jy ! Component: 150 - total flux cleaned = 0.0496305 Jy ! Component: 200 - total flux cleaned = 0.0496614 Jy ! Total flux subtracted in 200 components = 0.0496614 Jy ! Clean residual min=-0.013142 max=0.022605 Jy/beam ! Clean residual mean=0.000285 rms=0.004689 Jy/beam ! Combined flux in latest and established models = 0.508717 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 88 components and 0.508717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087730Jy sigma=1.280034 ! Fit after self-cal, rms=0.085938Jy sigma=1.253782 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.202 x 8.167 at -9.367 degrees (North through East) ! Clean map min=-0.012234 max=0.34981 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085938Jy sigma=1.253782 ! Fit after self-cal, rms=0.082388Jy sigma=1.232923 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082388Jy sigma=1.232923 ! Fit after self-cal, rms=0.082381Jy sigma=1.232753 ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=8.121 mas, bpa=-9.611 degrees ! Estimated noise=1.80403 mJy/beam. ! Added new window around map position (33.5, -53). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249448 Jy ! Component: 100 - total flux cleaned = 0.0378283 Jy ! Component: 150 - total flux cleaned = 0.0434042 Jy ! Component: 200 - total flux cleaned = 0.0453304 Jy ! Total flux subtracted in 200 components = 0.0453304 Jy ! Clean residual min=-0.010469 max=0.012058 Jy/beam ! Clean residual mean=0.000212 rms=0.003256 Jy/beam ! Combined flux in latest and established models = 0.554047 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 134 components and 0.554047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078101Jy sigma=1.128212 ! Fit after self-cal, rms=0.077608Jy sigma=1.121993 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077608Jy sigma=1.121993 ! Fit after self-cal, rms=0.072055Jy sigma=1.051210 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072055Jy sigma=1.051210 ! Fit after self-cal, rms=0.072040Jy sigma=1.050837 ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=8.04 mas, bpa=-10.05 degrees ! Estimated noise=1.77914 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00713178 Jy ! Component: 100 - total flux cleaned = 0.0118241 Jy ! Component: 150 - total flux cleaned = 0.0153702 Jy ! Component: 200 - total flux cleaned = 0.017671 Jy ! Total flux subtracted in 200 components = 0.017671 Jy ! Clean residual min=-0.007586 max=0.010985 Jy/beam ! Clean residual mean=0.000226 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 0.571718 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 171 components and 0.571718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070507Jy sigma=1.016504 ! Fit after self-cal, rms=0.070378Jy sigma=1.014591 ! Inverting map ! Added new window around map position (20.5, -26.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101621 Jy ! Component: 100 - total flux cleaned = 0.0139505 Jy ! Component: 150 - total flux cleaned = 0.0171157 Jy ! Component: 200 - total flux cleaned = 0.0188657 Jy ! Total flux subtracted in 200 components = 0.0188657 Jy ! Clean residual min=-0.006853 max=0.006736 Jy/beam ! Clean residual mean=0.000129 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 0.590584 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 198 components and 0.590584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069168Jy sigma=0.983063 ! Fit after self-cal, rms=0.069146Jy sigma=0.982331 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.864 mas, bmaj=17.52 mas, bpa=-7.232 degrees ! Estimated noise=2.32158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271502 Jy ! Component: 100 - total flux cleaned = 0.00380012 Jy ! Component: 150 - total flux cleaned = 0.00466252 Jy ! Component: 200 - total flux cleaned = 0.00546365 Jy ! Total flux subtracted in 200 components = 0.00546365 Jy ! Clean residual min=-0.006452 max=0.007821 Jy/beam ! Clean residual mean=0.000201 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.596048 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 223 components and 0.596047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069154Jy sigma=0.978372 ! Fit after self-cal, rms=0.069094Jy sigma=0.977420 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=7.019 mas, bpa=-12.1 degrees ! Estimated noise=2.44038 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.312045 Jy ! Component: 100 - total flux cleaned = 0.394325 Jy ! Component: 150 - total flux cleaned = 0.440082 Jy ! Component: 200 - total flux cleaned = 0.471324 Jy ! Total flux subtracted in 200 components = 0.471324 Jy ! Clean residual min=-0.012167 max=0.014232 Jy/beam ! Clean residual mean=-0.000028 rms=0.004240 Jy/beam ! Combined flux in latest and established models = 0.471324 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.471324 Jy ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=8.04 mas, bpa=-10.05 degrees ! Estimated noise=1.77914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311501 Jy ! Component: 100 - total flux cleaned = 0.0521137 Jy ! Component: 150 - total flux cleaned = 0.0677337 Jy ! Component: 200 - total flux cleaned = 0.0798711 Jy ! Total flux subtracted in 200 components = 0.0798711 Jy ! Clean residual min=-0.008433 max=0.007540 Jy/beam ! Clean residual mean=0.000114 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 0.551195 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 146 components and 0.551195 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.864 mas, bmaj=17.52 mas, bpa=-7.232 degrees ! Estimated noise=2.32158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157813 Jy ! Component: 100 - total flux cleaned = 0.0261592 Jy ! Component: 150 - total flux cleaned = 0.0325891 Jy ! Component: 200 - total flux cleaned = 0.0358442 Jy ! Total flux subtracted in 200 components = 0.0358442 Jy ! Clean residual min=-0.006694 max=0.008862 Jy/beam ! Clean residual mean=0.000198 rms=0.002792 Jy/beam ! Combined flux in latest and established models = 0.587039 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 213 components and 0.58704 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=8.04 mas, bpa=-10.05 degrees ! Estimated noise=1.77914 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496425 Jy ! Component: 100 - total flux cleaned = 0.00650958 Jy ! Component: 150 - total flux cleaned = 0.00749579 Jy ! Component: 200 - total flux cleaned = 0.00785882 Jy ! Total flux subtracted in 200 components = 0.00785882 Jy ! Clean residual min=-0.006992 max=0.006864 Jy/beam ! Clean residual mean=0.000088 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.594898 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 237 components and 0.594899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069075Jy sigma=0.979035 ! Fit after self-cal, rms=0.068971Jy sigma=0.977312 wmodel J2333-2343_S_2004_04_30_yyk\_map.mod ! Writing 237 model components to file: J2333-2343_S_2004_04_30_yyk_map.mod wobs J2333-2343_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J2333-2343_S_2004_04_30_yyk_uvs.fits wwins J2333-2343_S_2004_04_30_yyk\_map.win ! wwins: Wrote 4 windows to J2333-2343_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000885868 Jy ! Component: 100 - total flux cleaned = -0.00142574 Jy ! Component: 150 - total flux cleaned = -0.00200178 Jy ! Component: 200 - total flux cleaned = -0.00226633 Jy ! Component: 250 - total flux cleaned = -0.00268319 Jy ! Component: 300 - total flux cleaned = -0.00315591 Jy ! Component: 350 - total flux cleaned = -0.00345491 Jy ! Component: 400 - total flux cleaned = -0.00417362 Jy ! Component: 450 - total flux cleaned = -0.00486523 Jy ! Component: 500 - total flux cleaned = -0.0054688 Jy ! Component: 550 - total flux cleaned = -0.00625167 Jy ! Component: 600 - total flux cleaned = -0.00694947 Jy ! Component: 650 - total flux cleaned = -0.00763164 Jy ! Component: 700 - total flux cleaned = -0.00841708 Jy ! Component: 750 - total flux cleaned = -0.00918261 Jy ! Component: 800 - total flux cleaned = -0.0096989 Jy ! Component: 850 - total flux cleaned = -0.0102045 Jy ! Component: 900 - total flux cleaned = -0.0104232 Jy ! Component: 950 - total flux cleaned = -0.010693 Jy ! Component: 1000 - total flux cleaned = -0.0108519 Jy ! Component: 1050 - total flux cleaned = -0.0111114 Jy ! Component: 1100 - total flux cleaned = -0.0113663 Jy ! Component: 1150 - total flux cleaned = -0.0115163 Jy ! Component: 1200 - total flux cleaned = -0.0116631 Jy ! Component: 1250 - total flux cleaned = -0.0118074 Jy ! Component: 1300 - total flux cleaned = -0.0117134 Jy ! Component: 1350 - total flux cleaned = -0.0118544 Jy ! Component: 1400 - total flux cleaned = -0.0119931 Jy ! Component: 1450 - total flux cleaned = -0.0120387 Jy ! Component: 1500 - total flux cleaned = -0.0121272 Jy ! Component: 1550 - total flux cleaned = -0.0119945 Jy ! Component: 1600 - total flux cleaned = -0.0119508 Jy ! Component: 1650 - total flux cleaned = -0.011994 Jy ! Component: 1700 - total flux cleaned = -0.0118662 Jy ! Component: 1750 - total flux cleaned = -0.0117404 Jy ! Component: 1800 - total flux cleaned = -0.0116989 Jy ! Component: 1850 - total flux cleaned = -0.0116576 Jy ! Component: 1900 - total flux cleaned = -0.0114548 Jy ! Component: 1950 - total flux cleaned = -0.0112948 Jy ! Component: 2000 - total flux cleaned = -0.0111356 Jy ! Total flux subtracted in 2048 components = -0.0108597 Jy ! Clean residual min=-0.002387 max=0.002159 Jy/beam ! Clean residual mean=0.000088 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.584039 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 376 components and 0.584039 Jy ![Exited script file: muppet] wmap "J2333-2343_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.131 x 8.04 at -10.05 degrees (North through East) ! Clean map min=-0.0067766 max=0.33986 Jy/beam ! Writing clean map to FITS file: J2333-2343_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.339857 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000783462 device "J2333-2343_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2333-2343_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.69158 0.69158 1.38316 2.76632 5.53264 11.0653 22.1306 44.2612 88.5223 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.339 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.131 x 8.04 at -10.05 degrees (North through East) ! Clean map min=-0.0067766 max=0.33986 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2333-2343_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2333-2343_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2333-2343_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:59:51 2005