! Started logfile: J2309-3059_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:58:57 2005 obs J2309-3059_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J2309-3059_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905556 visibilities/baseline/integration-bin. ! Found source: J2309-3059 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1635 lines of history. ! ! Reading 652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2309-3059_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.400294 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.615751Jy sigma=9.442477 ! Fit after self-cal, rms=0.615649Jy sigma=9.440387 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=14.09 mas, bpa=-18.91 degrees ! Estimated noise=2.77402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.33348 Jy ! Component: 100 - total flux cleaned = 0.38392 Jy ! Total flux subtracted in 100 components = 0.38392 Jy ! Clean residual min=-0.012495 max=0.012776 Jy/beam ! Clean residual mean=-0.000293 rms=0.003945 Jy/beam ! Combined flux in latest and established models = 0.38392 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.38392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086195Jy sigma=1.204385 ! Fit after self-cal, rms=0.086180Jy sigma=1.204088 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=17.44 mas, bpa=-19.54 degrees ! Estimated noise=2.08958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193549 Jy ! Component: 100 - total flux cleaned = 0.0273053 Jy ! Component: 150 - total flux cleaned = 0.0311371 Jy ! Component: 200 - total flux cleaned = 0.0318057 Jy ! Total flux subtracted in 200 components = 0.0318057 Jy ! Clean residual min=-0.011213 max=0.011778 Jy/beam ! Clean residual mean=-0.000369 rms=0.003293 Jy/beam ! Combined flux in latest and established models = 0.415726 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 62 components and 0.415726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082537Jy sigma=1.154857 ! Fit after self-cal, rms=0.082543Jy sigma=1.154693 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.990383 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.02 KP 0.98 ! LA 1.19 MK 1.02 NL 0.96 OV 0.96 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983776 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.04 KP 1.00 ! LA 1.10 MK 0.97 NL 1.04 OV 0.97 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991821 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.11 KP 0.96 ! LA 0.93 MK 1.06 NL 1.07 OV 1.05 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04017 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 HN 1.01 KP 0.92 ! LA 1.00* MK 0.95 NL 0.98 OV 0.88 ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.082543Jy sigma=1.154693 ! Fit after self-cal, rms=0.074428Jy sigma=1.009152 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074428Jy sigma=1.009152 ! Fit after self-cal, rms=0.074437Jy sigma=1.009100 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.505 mas, bmaj=17.65 mas, bpa=-19.69 degrees ! Estimated noise=2.07037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00393772 Jy ! Component: 100 - total flux cleaned = -0.00478546 Jy ! Component: 150 - total flux cleaned = -0.00505708 Jy ! Component: 200 - total flux cleaned = -0.00515773 Jy ! Total flux subtracted in 200 components = -0.00515773 Jy ! Clean residual min=-0.005893 max=0.006217 Jy/beam ! Clean residual mean=-0.000038 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.410568 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.410568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074195Jy sigma=1.005978 ! Fit after self-cal, rms=0.074195Jy sigma=1.005840 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074195Jy sigma=1.005840 ! Fit after self-cal, rms=0.072178Jy sigma=0.972690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157344 Jy ! Component: 100 - total flux cleaned = -0.000154396 Jy ! Component: 150 - total flux cleaned = -0.000154024 Jy ! Component: 200 - total flux cleaned = -0.000154898 Jy ! Total flux subtracted in 200 components = -0.000154898 Jy ! Clean residual min=-0.005995 max=0.006180 Jy/beam ! Clean residual mean=-0.000038 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.410413 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.410414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072107Jy sigma=0.971945 ! Fit after self-cal, rms=0.071983Jy sigma=0.970279 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.505 x 17.65 at -19.69 degrees (North through East) ! Clean map min=-0.0058 max=0.38651 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071983Jy sigma=0.970279 ! Fit after self-cal, rms=0.069332Jy sigma=0.937668 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069332Jy sigma=0.937668 ! Fit after self-cal, rms=0.069325Jy sigma=0.937517 ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=17.63 mas, bpa=-19.76 degrees ! Estimated noise=2.06655 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115099 Jy ! Component: 100 - total flux cleaned = -0.000986768 Jy ! Component: 150 - total flux cleaned = -0.000887217 Jy ! Component: 200 - total flux cleaned = -0.000932942 Jy ! Total flux subtracted in 200 components = -0.000932942 Jy ! Clean residual min=-0.005589 max=0.004901 Jy/beam ! Clean residual mean=-0.000005 rms=0.001607 Jy/beam ! Combined flux in latest and established models = 0.409481 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 0.409481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069222Jy sigma=0.936232 ! Fit after self-cal, rms=0.069218Jy sigma=0.936167 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069218Jy sigma=0.936167 ! Fit after self-cal, rms=0.067048Jy sigma=0.900541 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067048Jy sigma=0.900541 ! Fit after self-cal, rms=0.067047Jy sigma=0.900524 ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=17.63 mas, bpa=-19.82 degrees ! Estimated noise=2.06646 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000671452 Jy ! Component: 100 - total flux cleaned = -0.000564402 Jy ! Component: 150 - total flux cleaned = -0.000565492 Jy ! Component: 200 - total flux cleaned = -0.000566162 Jy ! Total flux subtracted in 200 components = -0.000566162 Jy ! Clean residual min=-0.005573 max=0.004938 Jy/beam ! Clean residual mean=-0.000007 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 0.408914 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 0.408914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066978Jy sigma=0.899400 ! Fit after self-cal, rms=0.066975Jy sigma=0.899381 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.721 mas, bmaj=29.61 mas, bpa=-3.4 degrees ! Estimated noise=2.45686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310949 Jy ! Component: 100 - total flux cleaned = 0.000427141 Jy ! Component: 150 - total flux cleaned = 0.000448842 Jy ! Component: 200 - total flux cleaned = 0.000429349 Jy ! Total flux subtracted in 200 components = 0.000429349 Jy ! Clean residual min=-0.006946 max=0.005954 Jy/beam ! Clean residual mean=0.000007 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.409344 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 109 components and 0.409344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066974Jy sigma=0.899330 ! Fit after self-cal, rms=0.066978Jy sigma=0.899315 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=14.19 mas, bpa=-19.17 degrees ! Estimated noise=2.75991 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.332118 Jy ! Component: 100 - total flux cleaned = 0.378159 Jy ! Component: 150 - total flux cleaned = 0.392835 Jy ! Component: 200 - total flux cleaned = 0.399594 Jy ! Total flux subtracted in 200 components = 0.399594 Jy ! Clean residual min=-0.008496 max=0.007891 Jy/beam ! Clean residual mean=0.000043 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 0.399594 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.399594 Jy ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=17.63 mas, bpa=-19.82 degrees ! Estimated noise=2.06646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731031 Jy ! Component: 100 - total flux cleaned = 0.0086421 Jy ! Component: 150 - total flux cleaned = 0.00948966 Jy ! Component: 200 - total flux cleaned = 0.00990241 Jy ! Total flux subtracted in 200 components = 0.00990241 Jy ! Clean residual min=-0.005889 max=0.005456 Jy/beam ! Clean residual mean=-0.000012 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.409496 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 83 components and 0.409496 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.721 mas, bmaj=29.61 mas, bpa=-3.4 degrees ! Estimated noise=2.45686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.24159e-06 Jy ! Component: 100 - total flux cleaned = 0.000246958 Jy ! Component: 150 - total flux cleaned = 0.000339404 Jy ! Component: 200 - total flux cleaned = 0.000301552 Jy ! Total flux subtracted in 200 components = 0.000301552 Jy ! Clean residual min=-0.007081 max=0.005935 Jy/beam ! Clean residual mean=0.000002 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.409798 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.409798 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=17.63 mas, bpa=-19.82 degrees ! Estimated noise=2.06646 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424747 Jy ! Component: 100 - total flux cleaned = 0.000425203 Jy ! Component: 150 - total flux cleaned = 0.000425702 Jy ! Component: 200 - total flux cleaned = 0.000472482 Jy ! Total flux subtracted in 200 components = 0.000472482 Jy ! Clean residual min=-0.005728 max=0.005391 Jy/beam ! Clean residual mean=-0.000008 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.41027 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.41027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066944Jy sigma=0.899826 ! Fit after self-cal, rms=0.066943Jy sigma=0.899654 wmodel J2309-3059_S_2004_04_30_yyk\_map.mod ! Writing 113 model components to file: J2309-3059_S_2004_04_30_yyk_map.mod wobs J2309-3059_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J2309-3059_S_2004_04_30_yyk_uvs.fits wwins J2309-3059_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J2309-3059_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104814 Jy ! Component: 100 - total flux cleaned = -0.00123041 Jy ! Component: 150 - total flux cleaned = -0.00147738 Jy ! Component: 200 - total flux cleaned = -0.00162592 Jy ! Component: 250 - total flux cleaned = -0.00155545 Jy ! Component: 300 - total flux cleaned = -0.00141867 Jy ! Component: 350 - total flux cleaned = -0.00135351 Jy ! Component: 400 - total flux cleaned = -0.00116878 Jy ! Component: 450 - total flux cleaned = -0.000813371 Jy ! Component: 500 - total flux cleaned = -0.000471052 Jy ! Component: 550 - total flux cleaned = -0.000307214 Jy ! Component: 600 - total flux cleaned = -4.16801e-05 Jy ! Component: 650 - total flux cleaned = 5.92724e-05 Jy ! Component: 700 - total flux cleaned = 0.00010749 Jy ! Component: 750 - total flux cleaned = 0.000202837 Jy ! Component: 800 - total flux cleaned = 0.00025004 Jy ! Component: 850 - total flux cleaned = 0.000432514 Jy ! Component: 900 - total flux cleaned = 0.000477291 Jy ! Component: 950 - total flux cleaned = 0.00052107 Jy ! Component: 1000 - total flux cleaned = 0.00060463 Jy ! Component: 1050 - total flux cleaned = 0.00068557 Jy ! Component: 1100 - total flux cleaned = 0.000685042 Jy ! Component: 1150 - total flux cleaned = 0.000646805 Jy ! Component: 1200 - total flux cleaned = 0.000799365 Jy ! Component: 1250 - total flux cleaned = 0.000761336 Jy ! Component: 1300 - total flux cleaned = 0.000615905 Jy ! Component: 1350 - total flux cleaned = 0.000580364 Jy ! Component: 1400 - total flux cleaned = 0.000544565 Jy ! Component: 1450 - total flux cleaned = 0.000510027 Jy ! Component: 1500 - total flux cleaned = 0.000647174 Jy ! Component: 1550 - total flux cleaned = 0.000579654 Jy ! Component: 1600 - total flux cleaned = 0.000612957 Jy ! Component: 1650 - total flux cleaned = 0.000480735 Jy ! Component: 1700 - total flux cleaned = 0.00034981 Jy ! Component: 1750 - total flux cleaned = 0.000284953 Jy ! Component: 1800 - total flux cleaned = 0.000220495 Jy ! Component: 1850 - total flux cleaned = 0.00018826 Jy ! Component: 1900 - total flux cleaned = 3.08388e-05 Jy ! Component: 1950 - total flux cleaned = -3.14309e-05 Jy ! Component: 2000 - total flux cleaned = -6.25192e-05 Jy ! Total flux subtracted in 2048 components = -0.000123838 Jy ! Clean residual min=-0.001998 max=0.001885 Jy/beam ! Clean residual mean=0.000002 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.410147 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 237 components and 0.410147 Jy ![Exited script file: muppet] wmap "J2309-3059_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.515 x 17.63 at -19.82 degrees (North through East) ! Clean map min=-0.0057082 max=0.38476 Jy/beam ! Writing clean map to FITS file: J2309-3059_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.38476 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000638592 device "J2309-3059_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2309-3059_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.497915 0.497915 0.99583 1.99166 3.98332 7.96664 15.9333 31.8666 63.7331 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.384 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.515 x 17.63 at -19.82 degrees (North through East) ! Clean map min=-0.0057082 max=0.38476 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2309-3059_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2309-3059_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2309-3059_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:59:01 2005