! Started logfile: J2249-3039_X_2004_04_30_yyk_uvs.log on Wed Dec 7 00:57:46 2005 obs J2249-3039_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J2249-3039_X_2004_04_30_yyk_uve.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.971429 visibilities/baseline/integration-bin. ! Found source: J2249-3039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1553 lines of history. ! ! Reading 1224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2249-3039_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.321741 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.694090Jy sigma=12.527759 ! Fit after self-cal, rms=0.693801Jy sigma=12.523222 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7871 mas, bmaj=5.392 mas, bpa=-26.49 degrees ! Estimated noise=2.0413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.258576 Jy ! Component: 100 - total flux cleaned = 0.311419 Jy ! Total flux subtracted in 100 components = 0.311419 Jy ! Clean residual min=-0.011039 max=0.016009 Jy/beam ! Clean residual mean=-0.000086 rms=0.003617 Jy/beam ! Combined flux in latest and established models = 0.311419 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.311419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076232Jy sigma=1.188151 ! Fit after self-cal, rms=0.076220Jy sigma=1.187990 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.077 mas, bmaj=5.84 mas, bpa=-24.59 degrees ! Estimated noise=1.4006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245203 Jy ! Component: 100 - total flux cleaned = 0.0336637 Jy ! Component: 150 - total flux cleaned = 0.0382341 Jy ! Component: 200 - total flux cleaned = 0.0398572 Jy ! Total flux subtracted in 200 components = 0.0398572 Jy ! Clean residual min=-0.008660 max=0.008268 Jy/beam ! Clean residual mean=0.000100 rms=0.002450 Jy/beam ! Combined flux in latest and established models = 0.351276 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 0.351277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070999Jy sigma=1.075507 ! Fit after self-cal, rms=0.070995Jy sigma=1.075392 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01121 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.00* KP 1.00 ! LA 0.98 MK 0.99 NL 1.01 OV 1.01 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01105 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.00* KP 0.92 ! LA 0.97 MK 0.96 NL 1.01 OV 0.99 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.995634 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 1.00* KP 0.86 ! LA 0.98 MK 1.03 NL 1.00 OV 1.04 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.974918 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 1.00* KP 0.93 ! LA 0.97 MK 1.06 NL 1.00 OV 1.03 ! PT 1.13 SC 1.00* ! ! ! Fit before self-cal, rms=0.070995Jy sigma=1.075392 ! Fit after self-cal, rms=0.067909Jy sigma=1.008169 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067909Jy sigma=1.008169 ! Fit after self-cal, rms=0.067898Jy sigma=1.008073 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.083 mas, bmaj=5.903 mas, bpa=-24.63 degrees ! Estimated noise=1.39829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226552 Jy ! Component: 100 - total flux cleaned = -0.00249679 Jy ! Component: 150 - total flux cleaned = -0.00276946 Jy ! Component: 200 - total flux cleaned = -0.00305792 Jy ! Total flux subtracted in 200 components = -0.00305792 Jy ! Clean residual min=-0.004292 max=0.004979 Jy/beam ! Clean residual mean=0.000068 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 0.348219 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.348219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067762Jy sigma=1.005544 ! Fit after self-cal, rms=0.067752Jy sigma=1.005447 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067752Jy sigma=1.005447 ! Fit after self-cal, rms=0.065276Jy sigma=0.948887 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306902 Jy ! Component: 100 - total flux cleaned = 0.000100745 Jy ! Component: 150 - total flux cleaned = -3.60372e-05 Jy ! Component: 200 - total flux cleaned = -0.000197763 Jy ! Total flux subtracted in 200 components = -0.000197763 Jy ! Clean residual min=-0.004180 max=0.004835 Jy/beam ! Clean residual mean=0.000067 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.348021 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.348021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065223Jy sigma=0.947777 ! Fit after self-cal, rms=0.065251Jy sigma=0.943842 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.083 x 5.903 at -24.63 degrees (North through East) ! Clean map min=-0.0039524 max=0.31087 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065251Jy sigma=0.943842 ! Fit after self-cal, rms=0.065245Jy sigma=0.929011 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065245Jy sigma=0.929011 ! Fit after self-cal, rms=0.065346Jy sigma=0.928470 ! Inverting map and beam ! Estimated beam: bmin=1.084 mas, bmaj=5.931 mas, bpa=-24.65 degrees ! Estimated noise=1.39895 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000679403 Jy ! Component: 100 - total flux cleaned = -0.000885095 Jy ! Component: 150 - total flux cleaned = -0.000994144 Jy ! Component: 200 - total flux cleaned = -0.00109268 Jy ! Total flux subtracted in 200 components = -0.00109268 Jy ! Clean residual min=-0.004187 max=0.004808 Jy/beam ! Clean residual mean=0.000066 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.346928 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.346928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065313Jy sigma=0.927741 ! Fit after self-cal, rms=0.065358Jy sigma=0.927612 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065358Jy sigma=0.927612 ! Fit after self-cal, rms=0.063988Jy sigma=0.898293 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063988Jy sigma=0.898293 ! Fit after self-cal, rms=0.064016Jy sigma=0.898232 ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=5.936 mas, bpa=-24.65 degrees ! Estimated noise=1.40043 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.96383e-05 Jy ! Component: 100 - total flux cleaned = -1.89146e-05 Jy ! Component: 150 - total flux cleaned = -7.74824e-05 Jy ! Component: 200 - total flux cleaned = -0.000185513 Jy ! Total flux subtracted in 200 components = -0.000185513 Jy ! Clean residual min=-0.004061 max=0.004774 Jy/beam ! Clean residual mean=0.000060 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.346743 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 0.346743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064001Jy sigma=0.897760 ! Fit after self-cal, rms=0.064011Jy sigma=0.897722 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.751 mas, bmaj=8.683 mas, bpa=-5.974 degrees ! Estimated noise=1.59763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395061 Jy ! Component: 100 - total flux cleaned = -0.00044241 Jy ! Component: 150 - total flux cleaned = -0.00046424 Jy ! Component: 200 - total flux cleaned = -0.000484426 Jy ! Total flux subtracted in 200 components = -0.000484426 Jy ! Clean residual min=-0.004473 max=0.005237 Jy/beam ! Clean residual mean=0.000088 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.346258 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 0.346258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064001Jy sigma=0.897590 ! Fit after self-cal, rms=0.064002Jy sigma=0.897579 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7887 mas, bmaj=5.455 mas, bpa=-26.5 degrees ! Estimated noise=2.05827 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.261059 Jy ! Component: 100 - total flux cleaned = 0.313452 Jy ! Component: 150 - total flux cleaned = 0.334434 Jy ! Component: 200 - total flux cleaned = 0.343617 Jy ! Total flux subtracted in 200 components = 0.343617 Jy ! Clean residual min=-0.004954 max=0.005308 Jy/beam ! Clean residual mean=0.000014 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.343617 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.343617 Jy ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=5.936 mas, bpa=-24.65 degrees ! Estimated noise=1.40043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284909 Jy ! Component: 100 - total flux cleaned = 0.00349817 Jy ! Component: 150 - total flux cleaned = 0.00366054 Jy ! Component: 200 - total flux cleaned = 0.0036578 Jy ! Total flux subtracted in 200 components = 0.0036578 Jy ! Clean residual min=-0.004018 max=0.004730 Jy/beam ! Clean residual mean=0.000063 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.347275 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 54 components and 0.347275 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.751 mas, bmaj=8.683 mas, bpa=-5.974 degrees ! Estimated noise=1.59763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000663144 Jy ! Component: 100 - total flux cleaned = -0.000846341 Jy ! Component: 150 - total flux cleaned = -0.000930369 Jy ! Component: 200 - total flux cleaned = -0.000969829 Jy ! Total flux subtracted in 200 components = -0.000969829 Jy ! Clean residual min=-0.004462 max=0.005217 Jy/beam ! Clean residual mean=0.000088 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.346305 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 0.346305 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=5.936 mas, bpa=-24.65 degrees ! Estimated noise=1.40043 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000518807 Jy ! Component: 100 - total flux cleaned = 0.000566397 Jy ! Component: 150 - total flux cleaned = 0.000610947 Jy ! Component: 200 - total flux cleaned = 0.000653343 Jy ! Total flux subtracted in 200 components = 0.000653343 Jy ! Clean residual min=-0.003938 max=0.004743 Jy/beam ! Clean residual mean=0.000062 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.346958 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.346958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064066Jy sigma=0.898757 ! Fit after self-cal, rms=0.064057Jy sigma=0.898738 wmodel J2249-3039_X_2004_04_30_yyk\_map.mod ! Writing 85 model components to file: J2249-3039_X_2004_04_30_yyk_map.mod wobs J2249-3039_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J2249-3039_X_2004_04_30_yyk_uvs.fits wwins J2249-3039_X_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J2249-3039_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189993 Jy ! Component: 100 - total flux cleaned = 0.00198096 Jy ! Component: 150 - total flux cleaned = 0.00166392 Jy ! Component: 200 - total flux cleaned = 0.00160324 Jy ! Component: 250 - total flux cleaned = 0.00165734 Jy ! Component: 300 - total flux cleaned = 0.00191492 Jy ! Component: 350 - total flux cleaned = 0.00215945 Jy ! Component: 400 - total flux cleaned = 0.00253403 Jy ! Component: 450 - total flux cleaned = 0.00271333 Jy ! Component: 500 - total flux cleaned = 0.0028858 Jy ! Component: 550 - total flux cleaned = 0.00292702 Jy ! Component: 600 - total flux cleaned = 0.00304587 Jy ! Component: 650 - total flux cleaned = 0.00316117 Jy ! Component: 700 - total flux cleaned = 0.00331082 Jy ! Component: 750 - total flux cleaned = 0.00338383 Jy ! Component: 800 - total flux cleaned = 0.00345524 Jy ! Component: 850 - total flux cleaned = 0.00355963 Jy ! Component: 900 - total flux cleaned = 0.00372858 Jy ! Component: 950 - total flux cleaned = 0.00389419 Jy ! Component: 1000 - total flux cleaned = 0.0040239 Jy ! Component: 1050 - total flux cleaned = 0.00418366 Jy ! Component: 1100 - total flux cleaned = 0.00437198 Jy ! Component: 1150 - total flux cleaned = 0.00449582 Jy ! Component: 1200 - total flux cleaned = 0.00467922 Jy ! Component: 1250 - total flux cleaned = 0.00482977 Jy ! Component: 1300 - total flux cleaned = 0.00500785 Jy ! Component: 1350 - total flux cleaned = 0.00512503 Jy ! Component: 1400 - total flux cleaned = 0.00524094 Jy ! Component: 1450 - total flux cleaned = 0.00524072 Jy ! Component: 1500 - total flux cleaned = 0.00524065 Jy ! Component: 1550 - total flux cleaned = 0.00521244 Jy ! Component: 1600 - total flux cleaned = 0.00515621 Jy ! Component: 1650 - total flux cleaned = 0.0051563 Jy ! Component: 1700 - total flux cleaned = 0.00507281 Jy ! Component: 1750 - total flux cleaned = 0.00510055 Jy ! Component: 1800 - total flux cleaned = 0.005073 Jy ! Component: 1850 - total flux cleaned = 0.00507294 Jy ! Component: 1900 - total flux cleaned = 0.00510042 Jy ! Component: 1950 - total flux cleaned = 0.0051277 Jy ! Component: 2000 - total flux cleaned = 0.00518199 Jy ! Total flux subtracted in 2048 components = 0.00534479 Jy ! Clean residual min=-0.001523 max=0.001554 Jy/beam ! Clean residual mean=-0.000012 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.352303 Jy keep ! Adding 103 model components to the UV plane model. ! The established model now contains 188 components and 0.352303 Jy ![Exited script file: muppet] wmap "J2249-3039_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.085 x 5.936 at -24.65 degrees (North through East) ! Clean map min=-0.0042733 max=0.31063 Jy/beam ! Writing clean map to FITS file: J2249-3039_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.310625 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000505686 device "J2249-3039_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2249-3039_X_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.488389 0.488389 0.976777 1.95355 3.90711 7.81422 15.6284 31.2569 62.5137 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.31 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.085 x 5.936 at -24.65 degrees (North through East) ! Clean map min=-0.0042733 max=0.31063 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2249-3039_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2249-3039_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2249-3039_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:57:50 2005