! Started logfile: J2248-3235_X_2004_04_30_yyk_uvs.log on Wed Dec 7 00:57:37 2005 obs J2248-3235_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J2248-3235_X_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2248-3235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1548 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2248-3235_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.311661 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.704038Jy sigma=11.456465 ! Fit after self-cal, rms=0.703932Jy sigma=11.454834 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6792 mas, bmaj=1.88 mas, bpa=-6.335 degrees ! Estimated noise=2.25035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.25287 Jy ! Component: 100 - total flux cleaned = 0.299959 Jy ! Total flux subtracted in 100 components = 0.299959 Jy ! Clean residual min=-0.011069 max=0.016839 Jy/beam ! Clean residual mean=-0.000063 rms=0.003439 Jy/beam ! Combined flux in latest and established models = 0.299959 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.299959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076470Jy sigma=1.157986 ! Fit after self-cal, rms=0.076469Jy sigma=1.157577 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8343 mas, bmaj=2.24 mas, bpa=-4.487 degrees ! Estimated noise=1.65744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320722 Jy ! Component: 100 - total flux cleaned = 0.0449236 Jy ! Component: 150 - total flux cleaned = 0.0502597 Jy ! Component: 200 - total flux cleaned = 0.051656 Jy ! Total flux subtracted in 200 components = 0.051656 Jy ! Clean residual min=-0.006978 max=0.007329 Jy/beam ! Clean residual mean=0.000070 rms=0.002234 Jy/beam ! Combined flux in latest and established models = 0.351615 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.351615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069091Jy sigma=0.993622 ! Fit after self-cal, rms=0.069054Jy sigma=0.993527 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.995886 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.15 KP 0.94 ! LA 0.98 MK 0.97 NL 1.03 OV 0.98 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.996236 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.06 KP 0.88 ! LA 0.99 MK 1.00 NL 1.03 OV 0.98 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.980979 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.06 KP 0.92 ! LA 0.98 MK 1.02 NL 1.03 OV 1.03 ! PT 1.09 SC 1.00 ! ! ! Fit before self-cal, rms=0.069054Jy sigma=0.993527 ! Fit after self-cal, rms=0.067468Jy sigma=0.953480 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067468Jy sigma=0.953480 ! Fit after self-cal, rms=0.067484Jy sigma=0.953444 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8288 mas, bmaj=2.225 mas, bpa=-4.157 degrees ! Estimated noise=1.63615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00290486 Jy ! Component: 100 - total flux cleaned = -0.00276468 Jy ! Component: 150 - total flux cleaned = -0.00250558 Jy ! Component: 200 - total flux cleaned = -0.002324 Jy ! Total flux subtracted in 200 components = -0.002324 Jy ! Clean residual min=-0.006632 max=0.005664 Jy/beam ! Clean residual mean=0.000046 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.349291 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.349291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067259Jy sigma=0.949596 ! Fit after self-cal, rms=0.067235Jy sigma=0.949571 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067235Jy sigma=0.949571 ! Fit after self-cal, rms=0.064474Jy sigma=0.904440 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074584 Jy ! Component: 100 - total flux cleaned = 0.000783841 Jy ! Component: 150 - total flux cleaned = 0.000892189 Jy ! Component: 200 - total flux cleaned = 0.000961528 Jy ! Total flux subtracted in 200 components = 0.000961528 Jy ! Clean residual min=-0.006611 max=0.005501 Jy/beam ! Clean residual mean=0.000045 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.350252 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.350252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064444Jy sigma=0.903845 ! Fit after self-cal, rms=0.064296Jy sigma=0.901229 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8288 x 2.225 at -4.157 degrees (North through East) ! Clean map min=-0.0061255 max=0.28635 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064296Jy sigma=0.901229 ! Fit after self-cal, rms=0.064304Jy sigma=0.888084 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064304Jy sigma=0.888084 ! Fit after self-cal, rms=0.064309Jy sigma=0.887884 ! Inverting map and beam ! Estimated beam: bmin=0.8303 mas, bmaj=2.223 mas, bpa=-4.123 degrees ! Estimated noise=1.63802 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320103 Jy ! Component: 100 - total flux cleaned = 0.000246024 Jy ! Component: 150 - total flux cleaned = 0.000224299 Jy ! Component: 200 - total flux cleaned = 0.000203865 Jy ! Total flux subtracted in 200 components = 0.000203865 Jy ! Clean residual min=-0.006532 max=0.005495 Jy/beam ! Clean residual mean=0.000030 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.350456 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.350456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064288Jy sigma=0.887601 ! Fit after self-cal, rms=0.064285Jy sigma=0.887576 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064285Jy sigma=0.887576 ! Fit after self-cal, rms=0.063346Jy sigma=0.868536 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063346Jy sigma=0.868536 ! Fit after self-cal, rms=0.063350Jy sigma=0.868527 ! Inverting map and beam ! Estimated beam: bmin=0.828 mas, bmaj=2.216 mas, bpa=-4.136 degrees ! Estimated noise=1.64052 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127659 Jy ! Component: 100 - total flux cleaned = 0.00147518 Jy ! Component: 150 - total flux cleaned = 0.00149324 Jy ! Component: 200 - total flux cleaned = 0.00151038 Jy ! Total flux subtracted in 200 components = 0.00151038 Jy ! Clean residual min=-0.006427 max=0.005487 Jy/beam ! Clean residual mean=0.000030 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.351967 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.351967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063316Jy sigma=0.868139 ! Fit after self-cal, rms=0.063310Jy sigma=0.868130 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=7.708 mas, bpa=-1.439 degrees ! Estimated noise=2.14121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.31788e-05 Jy ! Component: 100 - total flux cleaned = 5.22899e-05 Jy ! Component: 150 - total flux cleaned = 5.10453e-05 Jy ! Component: 200 - total flux cleaned = 5.11518e-05 Jy ! Total flux subtracted in 200 components = 5.11518e-05 Jy ! Clean residual min=-0.007178 max=0.007001 Jy/beam ! Clean residual mean=0.000060 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 0.352018 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 49 components and 0.352018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063331Jy sigma=0.868123 ! Fit after self-cal, rms=0.063292Jy sigma=0.868013 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6756 mas, bmaj=1.867 mas, bpa=-6.183 degrees ! Estimated noise=2.24305 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.252597 Jy ! Component: 100 - total flux cleaned = 0.300998 Jy ! Component: 150 - total flux cleaned = 0.322372 Jy ! Component: 200 - total flux cleaned = 0.334194 Jy ! Total flux subtracted in 200 components = 0.334194 Jy ! Clean residual min=-0.007059 max=0.006775 Jy/beam ! Clean residual mean=-0.000019 rms=0.001918 Jy/beam ! Combined flux in latest and established models = 0.334194 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.334194 Jy ! Inverting map and beam ! Estimated beam: bmin=0.828 mas, bmaj=2.216 mas, bpa=-4.136 degrees ! Estimated noise=1.64052 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00985392 Jy ! Component: 100 - total flux cleaned = 0.0137848 Jy ! Component: 150 - total flux cleaned = 0.0152376 Jy ! Component: 200 - total flux cleaned = 0.0154154 Jy ! Total flux subtracted in 200 components = 0.0154154 Jy ! Clean residual min=-0.006572 max=0.005855 Jy/beam ! Clean residual mean=0.000021 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.34961 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.34961 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=7.708 mas, bpa=-1.439 degrees ! Estimated noise=2.14121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117411 Jy ! Component: 100 - total flux cleaned = 0.00120769 Jy ! Component: 150 - total flux cleaned = 0.00126838 Jy ! Component: 200 - total flux cleaned = 0.00129654 Jy ! Total flux subtracted in 200 components = 0.00129654 Jy ! Clean residual min=-0.007358 max=0.007070 Jy/beam ! Clean residual mean=0.000053 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.350906 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.350906 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.828 mas, bmaj=2.216 mas, bpa=-4.136 degrees ! Estimated noise=1.64052 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000836796 Jy ! Component: 100 - total flux cleaned = -0.000796337 Jy ! Component: 150 - total flux cleaned = -0.000722331 Jy ! Component: 200 - total flux cleaned = -0.000653398 Jy ! Total flux subtracted in 200 components = -0.000653398 Jy ! Clean residual min=-0.006574 max=0.005755 Jy/beam ! Clean residual mean=0.000024 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.350253 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.350253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063392Jy sigma=0.869542 ! Fit after self-cal, rms=0.063387Jy sigma=0.869515 wmodel J2248-3235_X_2004_04_30_yyk\_map.mod ! Writing 60 model components to file: J2248-3235_X_2004_04_30_yyk_map.mod wobs J2248-3235_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J2248-3235_X_2004_04_30_yyk_uvs.fits wwins J2248-3235_X_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J2248-3235_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137404 Jy ! Component: 100 - total flux cleaned = -0.00194113 Jy ! Component: 150 - total flux cleaned = -0.00236259 Jy ! Component: 200 - total flux cleaned = -0.00291126 Jy ! Component: 250 - total flux cleaned = -0.00320917 Jy ! Component: 300 - total flux cleaned = -0.00313924 Jy ! Component: 350 - total flux cleaned = -0.0030687 Jy ! Component: 400 - total flux cleaned = -0.00274831 Jy ! Component: 450 - total flux cleaned = -0.00244404 Jy ! Component: 500 - total flux cleaned = -0.00221205 Jy ! Component: 550 - total flux cleaned = -0.00193393 Jy ! Component: 600 - total flux cleaned = -0.00177432 Jy ! Component: 650 - total flux cleaned = -0.00161994 Jy ! Component: 700 - total flux cleaned = -0.00136839 Jy ! Component: 750 - total flux cleaned = -0.00107769 Jy ! Component: 800 - total flux cleaned = -0.000937691 Jy ! Component: 850 - total flux cleaned = -0.000800124 Jy ! Component: 900 - total flux cleaned = -0.000754946 Jy ! Component: 950 - total flux cleaned = -0.000624623 Jy ! Component: 1000 - total flux cleaned = -0.000625145 Jy ! Component: 1050 - total flux cleaned = -0.000583871 Jy ! Component: 1100 - total flux cleaned = -0.000502928 Jy ! Component: 1150 - total flux cleaned = -0.00038486 Jy ! Component: 1200 - total flux cleaned = -0.000385707 Jy ! Component: 1250 - total flux cleaned = -0.000348599 Jy ! Component: 1300 - total flux cleaned = -0.000497431 Jy ! Component: 1350 - total flux cleaned = -0.000607153 Jy ! Component: 1400 - total flux cleaned = -0.000678574 Jy ! Component: 1450 - total flux cleaned = -0.000818966 Jy ! Component: 1500 - total flux cleaned = -0.000888082 Jy ! Component: 1550 - total flux cleaned = -0.000990206 Jy ! Component: 1600 - total flux cleaned = -0.00109102 Jy ! Component: 1650 - total flux cleaned = -0.0011904 Jy ! Component: 1700 - total flux cleaned = -0.00132151 Jy ! Component: 1750 - total flux cleaned = -0.00148342 Jy ! Component: 1800 - total flux cleaned = -0.00170657 Jy ! Component: 1850 - total flux cleaned = -0.00186406 Jy ! Component: 1900 - total flux cleaned = -0.0020511 Jy ! Component: 1950 - total flux cleaned = -0.00220543 Jy ! Component: 2000 - total flux cleaned = -0.00241885 Jy ! Total flux subtracted in 2048 components = -0.0025696 Jy ! Clean residual min=-0.001800 max=0.001819 Jy/beam ! Clean residual mean=-0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.347683 Jy keep ! Adding 110 model components to the UV plane model. ! The established model now contains 170 components and 0.347683 Jy ![Exited script file: muppet] wmap "J2248-3235_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.828 x 2.216 at -4.136 degrees (North through East) ! Clean map min=-0.0041087 max=0.28973 Jy/beam ! Writing clean map to FITS file: J2248-3235_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.289727 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000554247 device "J2248-3235_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2248-3235_X_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.5739 0.5739 1.1478 2.2956 4.5912 9.1824 18.3648 36.7296 73.4592 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.289 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.828 x 2.216 at -4.136 degrees (North through East) ! Clean map min=-0.0041087 max=0.28973 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2248-3235_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2248-3235_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2248-3235_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:57:41 2005