! Started logfile: J2229-0832_X_2004_05_27_yyk_uvs.log on Wed Dec 7 00:56:59 2005 obs J2229-0832_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2229-0832_X_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905556 visibilities/baseline/integration-bin. ! Found source: J2229-0832 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1378 lines of history. ! ! Reading 652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2229-0832_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.61209 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.617995Jy sigma=30.928036 ! Fit after self-cal, rms=1.617991Jy sigma=30.927945 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6901 mas, bmaj=1.81 mas, bpa=-0.561 degrees ! Estimated noise=2.00265 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.21614 Jy ! Component: 100 - total flux cleaned = 2.53865 Jy ! Total flux subtracted in 100 components = 2.53865 Jy ! Clean residual min=-0.054456 max=0.082351 Jy/beam ! Clean residual mean=-0.000227 rms=0.014559 Jy/beam ! Combined flux in latest and established models = 2.53865 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.53865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222183Jy sigma=4.085146 ! Fit after self-cal, rms=0.222100Jy sigma=4.084028 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8585 mas, bmaj=2.162 mas, bpa=-5.306 degrees ! Estimated noise=1.45014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.132688 Jy ! Component: 100 - total flux cleaned = 0.183021 Jy ! Component: 150 - total flux cleaned = 0.188617 Jy ! Component: 200 - total flux cleaned = 0.187837 Jy ! Total flux subtracted in 200 components = 0.187837 Jy ! Clean residual min=-0.051279 max=0.034154 Jy/beam ! Clean residual mean=-0.000153 rms=0.009999 Jy/beam ! Combined flux in latest and established models = 2.72649 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 39 components and 2.72649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158458Jy sigma=2.916789 ! Fit after self-cal, rms=0.158421Jy sigma=2.916399 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00434 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.00 ! LA 0.99 MK 1.01 NL 1.00 OV 1.02 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01232 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 0.95 ! LA 0.97 MK 1.01 NL 0.98 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00357 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 0.90 KP 0.90 ! LA 0.98 MK 1.04 NL 0.97 OV 1.03 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.984925 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.96 KP 0.93 ! LA 0.98 MK 1.03 NL 0.99 OV 1.05 ! PT 1.11 SC 1.02 ! ! ! Fit before self-cal, rms=0.158421Jy sigma=2.916399 ! Fit after self-cal, rms=0.080217Jy sigma=1.478717 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080217Jy sigma=1.478717 ! Fit after self-cal, rms=0.080223Jy sigma=1.478705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8629 mas, bmaj=2.178 mas, bpa=-5.166 degrees ! Estimated noise=1.45254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741756 Jy ! Component: 100 - total flux cleaned = 0.008101 Jy ! Component: 150 - total flux cleaned = 0.00867126 Jy ! Component: 200 - total flux cleaned = 0.00915588 Jy ! Total flux subtracted in 200 components = 0.00915588 Jy ! Clean residual min=-0.014122 max=0.011572 Jy/beam ! Clean residual mean=0.000014 rms=0.002830 Jy/beam ! Combined flux in latest and established models = 2.73565 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 2.73565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078508Jy sigma=1.435246 ! Fit after self-cal, rms=0.078451Jy sigma=1.434682 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078451Jy sigma=1.434682 ! Fit after self-cal, rms=0.076126Jy sigma=1.392327 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532293 Jy ! Component: 100 - total flux cleaned = 0.0008859 Jy ! Component: 150 - total flux cleaned = 0.0013406 Jy ! Component: 200 - total flux cleaned = 0.00147379 Jy ! Total flux subtracted in 200 components = 0.00147379 Jy ! Clean residual min=-0.013888 max=0.010760 Jy/beam ! Clean residual mean=0.000016 rms=0.002764 Jy/beam ! Combined flux in latest and established models = 2.73712 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 2.73712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075689Jy sigma=1.382121 ! Fit after self-cal, rms=0.075545Jy sigma=1.379511 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8629 x 2.178 at -5.166 degrees (North through East) ! Clean map min=-0.012905 max=2.5965 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075545Jy sigma=1.379511 ! Fit after self-cal, rms=0.053939Jy sigma=0.973747 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053939Jy sigma=0.973747 ! Fit after self-cal, rms=0.053937Jy sigma=0.973514 ! Inverting map and beam ! Estimated beam: bmin=0.8641 mas, bmaj=2.182 mas, bpa=-5.212 degrees ! Estimated noise=1.45287 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124361 Jy ! Component: 100 - total flux cleaned = -0.000911377 Jy ! Component: 150 - total flux cleaned = -0.000643407 Jy ! Component: 200 - total flux cleaned = -0.000412985 Jy ! Total flux subtracted in 200 components = -0.000412985 Jy ! Clean residual min=-0.005859 max=0.007421 Jy/beam ! Clean residual mean=-0.000009 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 2.73671 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 2.73671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053285Jy sigma=0.961841 ! Fit after self-cal, rms=0.053229Jy sigma=0.961260 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053229Jy sigma=0.961260 ! Fit after self-cal, rms=0.052318Jy sigma=0.942246 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052318Jy sigma=0.942246 ! Fit after self-cal, rms=0.052318Jy sigma=0.942244 ! Inverting map and beam ! Estimated beam: bmin=0.8646 mas, bmaj=2.184 mas, bpa=-5.228 degrees ! Estimated noise=1.45321 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000932923 Jy ! Component: 100 - total flux cleaned = -0.00094232 Jy ! Component: 150 - total flux cleaned = -0.000835513 Jy ! Component: 200 - total flux cleaned = -0.000735812 Jy ! Total flux subtracted in 200 components = -0.000735812 Jy ! Clean residual min=-0.005670 max=0.007316 Jy/beam ! Clean residual mean=-0.000009 rms=0.001852 Jy/beam ! Combined flux in latest and established models = 2.73597 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 2.73597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051925Jy sigma=0.935167 ! Fit after self-cal, rms=0.051890Jy sigma=0.934857 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=3.966 mas, bpa=-4.77 degrees ! Estimated noise=1.89182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476256 Jy ! Component: 100 - total flux cleaned = 0.000414169 Jy ! Component: 150 - total flux cleaned = 0.000371403 Jy ! Component: 200 - total flux cleaned = 0.000367409 Jy ! Total flux subtracted in 200 components = 0.000367409 Jy ! Clean residual min=-0.007364 max=0.009736 Jy/beam ! Clean residual mean=-0.000012 rms=0.002843 Jy/beam ! Combined flux in latest and established models = 2.73634 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 2.73634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051961Jy sigma=0.935439 ! Fit after self-cal, rms=0.051888Jy sigma=0.934473 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6928 mas, bmaj=1.819 mas, bpa=-0.6231 degrees ! Estimated noise=2.00938 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.22364 Jy ! Component: 100 - total flux cleaned = 2.54063 Jy ! Component: 150 - total flux cleaned = 2.64509 Jy ! Component: 200 - total flux cleaned = 2.69353 Jy ! Total flux subtracted in 200 components = 2.69353 Jy ! Clean residual min=-0.010646 max=0.017023 Jy/beam ! Clean residual mean=-0.000038 rms=0.003331 Jy/beam ! Combined flux in latest and established models = 2.69352 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 2.69352 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8646 mas, bmaj=2.184 mas, bpa=-5.228 degrees ! Estimated noise=1.45321 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293974 Jy ! Component: 100 - total flux cleaned = 0.0408572 Jy ! Component: 150 - total flux cleaned = 0.0446415 Jy ! Component: 200 - total flux cleaned = 0.0450252 Jy ! Total flux subtracted in 200 components = 0.0450252 Jy ! Clean residual min=-0.006116 max=0.007310 Jy/beam ! Clean residual mean=-0.000006 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 2.73855 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 2.73855 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=3.966 mas, bpa=-4.77 degrees ! Estimated noise=1.89182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000815503 Jy ! Component: 100 - total flux cleaned = -0.00108457 Jy ! Component: 150 - total flux cleaned = -0.0010871 Jy ! Component: 200 - total flux cleaned = -0.00113753 Jy ! Total flux subtracted in 200 components = -0.00113753 Jy ! Clean residual min=-0.007288 max=0.009456 Jy/beam ! Clean residual mean=-0.000010 rms=0.002836 Jy/beam ! Combined flux in latest and established models = 2.73741 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 38 components and 2.73741 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8646 mas, bmaj=2.184 mas, bpa=-5.228 degrees ! Estimated noise=1.45321 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159576 Jy ! Component: 100 - total flux cleaned = 0.00200015 Jy ! Component: 150 - total flux cleaned = 0.00199607 Jy ! Component: 200 - total flux cleaned = 0.00199524 Jy ! Total flux subtracted in 200 components = 0.00199524 Jy ! Clean residual min=-0.005617 max=0.007288 Jy/beam ! Clean residual mean=-0.000005 rms=0.001826 Jy/beam ! Combined flux in latest and established models = 2.73941 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 2.73941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051814Jy sigma=0.933760 ! Fit after self-cal, rms=0.051736Jy sigma=0.932819 wmodel J2229-0832_X_2004_05_27_yyk\_map.mod ! Writing 45 model components to file: J2229-0832_X_2004_05_27_yyk_map.mod wobs J2229-0832_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2229-0832_X_2004_05_27_yyk_uvs.fits wwins J2229-0832_X_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J2229-0832_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318828 Jy ! Component: 100 - total flux cleaned = 0.00596294 Jy ! Component: 150 - total flux cleaned = 0.0078046 Jy ! Component: 200 - total flux cleaned = 0.00876094 Jy ! Component: 250 - total flux cleaned = 0.0093926 Jy ! Component: 300 - total flux cleaned = 0.00990716 Jy ! Component: 350 - total flux cleaned = 0.0101521 Jy ! Component: 400 - total flux cleaned = 0.0105415 Jy ! Component: 450 - total flux cleaned = 0.0109882 Jy ! Component: 500 - total flux cleaned = 0.011559 Jy ! Component: 550 - total flux cleaned = 0.0121064 Jy ! Component: 600 - total flux cleaned = 0.0124364 Jy ! Component: 650 - total flux cleaned = 0.0124998 Jy ! Component: 700 - total flux cleaned = 0.0124371 Jy ! Component: 750 - total flux cleaned = 0.0124374 Jy ! Component: 800 - total flux cleaned = 0.0125553 Jy ! Component: 850 - total flux cleaned = 0.0125004 Jy ! Component: 900 - total flux cleaned = 0.0125566 Jy ! Component: 950 - total flux cleaned = 0.0123932 Jy ! Component: 1000 - total flux cleaned = 0.0121828 Jy ! Component: 1050 - total flux cleaned = 0.0121327 Jy ! Component: 1100 - total flux cleaned = 0.0119316 Jy ! Component: 1150 - total flux cleaned = 0.0117353 Jy ! Component: 1200 - total flux cleaned = 0.011639 Jy ! Component: 1250 - total flux cleaned = 0.0116386 Jy ! Component: 1300 - total flux cleaned = 0.0115925 Jy ! Component: 1350 - total flux cleaned = 0.0114577 Jy ! Component: 1400 - total flux cleaned = 0.0115018 Jy ! Component: 1450 - total flux cleaned = 0.0115429 Jy ! Component: 1500 - total flux cleaned = 0.0114575 Jy ! Component: 1550 - total flux cleaned = 0.0113737 Jy ! Component: 1600 - total flux cleaned = 0.0114144 Jy ! Component: 1650 - total flux cleaned = 0.0113742 Jy ! Component: 1700 - total flux cleaned = 0.0113745 Jy ! Component: 1750 - total flux cleaned = 0.0112574 Jy ! Component: 1800 - total flux cleaned = 0.010953 Jy ! Component: 1850 - total flux cleaned = 0.0109165 Jy ! Component: 1900 - total flux cleaned = 0.0109524 Jy ! Component: 1950 - total flux cleaned = 0.0106253 Jy ! Component: 2000 - total flux cleaned = 0.0104824 Jy ! Total flux subtracted in 2048 components = 0.0103771 Jy ! Clean residual min=-0.001965 max=0.002255 Jy/beam ! Clean residual mean=-0.000004 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 2.74978 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 196 components and 2.74979 Jy ![Exited script file: muppet] wmap "J2229-0832_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8646 x 2.184 at -5.228 degrees (North through East) ! Clean map min=-0.0038529 max=2.5965 Jy/beam ! Writing clean map to FITS file: J2229-0832_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.59647 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000650316 device "J2229-0832_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2229-0832_X_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0751385 0.0751385 0.150277 0.300554 0.601108 1.20222 2.40443 4.80886 9.61772 19.2354 38.4709 76.9418 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.596 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8646 x 2.184 at -5.228 degrees (North through East) ! Clean map min=-0.0038529 max=2.5965 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2229-0832_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2229-0832_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2229-0832_X_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:57:03 2005