! Started logfile: J2229-0832_X_2004_05_08_yyk_uvs.log on Wed Dec  7 00:56:55 2005
obs J2229-0832_X_2004_05_08_yyk_uve.fits
! Reading UV FITS file: J2229-0832_X_2004_05_08_yyk_uve.fits
! AN table 1: 5 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924444 visibilities/baseline/integration-bin.
! Found source: J2229-0832
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1432 lines of history.
! 
! Reading 832 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J2229-0832_X_2004_05_08_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 2.64062 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.647446Jy  sigma=30.615972
! Fit after  self-cal, rms=1.647480Jy  sigma=30.615378
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7553 mas, bmaj=1.883 mas, bpa=-5.323 degrees
! Estimated noise=1.76242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.26975 Jy
! Component: 100  -  total flux cleaned = 2.59204 Jy
! Total flux subtracted in 100 components = 2.59204 Jy
! Clean residual min=-0.055704 max=0.087790 Jy/beam
! Clean residual mean=0.000185 rms=0.015943 Jy/beam
! Combined flux in latest and established models = 2.59204 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 2.59204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235850Jy  sigma=3.858708
! Fit after  self-cal, rms=0.235890Jy  sigma=3.857087
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9429 mas, bmaj=2.202 mas, bpa=-5.367 degrees
! Estimated noise=1.32943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.112799 Jy
! Component: 100  -  total flux cleaned = 0.149085 Jy
! Component: 150  -  total flux cleaned = 0.149025 Jy
! Component: 200  -  total flux cleaned = 0.149074 Jy
! Total flux subtracted in 200 components = 0.149074 Jy
! Clean residual min=-0.049833 max=0.032770 Jy/beam
! Clean residual mean=0.000078 rms=0.010523 Jy/beam
! Combined flux in latest and established models = 2.74112 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 37 components and 2.74112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196320Jy  sigma=3.041871
! Fit after  self-cal, rms=0.196287Jy  sigma=3.041254
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00343
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01243
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        0.95     
!   LA        0.97     MK        1.02     NL        0.98     OV        0.98     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00233
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        0.90     KP        0.89     
!   LA        0.99     MK        1.05     NL        0.98     OV        1.02     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.980548
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.05     HN        0.95     KP        0.94     
!   LA        0.98     MK        1.05     NL        1.00     OV        1.03     
!   PT        1.12     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.196287Jy  sigma=3.041254
! Fit after  self-cal, rms=0.134490Jy  sigma=1.729900
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134490Jy  sigma=1.729900
! Fit after  self-cal, rms=0.134462Jy  sigma=1.729877
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9464 mas, bmaj=2.22 mas, bpa=-5.088 degrees
! Estimated noise=1.32999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00479188 Jy
! Component: 100  -  total flux cleaned = 0.00553048 Jy
! Component: 150  -  total flux cleaned = 0.00615961 Jy
! Component: 200  -  total flux cleaned = 0.00695917 Jy
! Total flux subtracted in 200 components = 0.00695917 Jy
! Clean residual min=-0.013653 max=0.014458 Jy/beam
! Clean residual mean=-0.000091 rms=0.003518 Jy/beam
! Combined flux in latest and established models = 2.74808 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 40 components and 2.74808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133297Jy  sigma=1.693265
! Fit after  self-cal, rms=0.133132Jy  sigma=1.692355
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133132Jy  sigma=1.692355
! Fit after  self-cal, rms=0.114191Jy  sigma=1.571541
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24.6, 24.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00833126 Jy
! Component: 100  -  total flux cleaned = 0.0075475 Jy
! Component: 150  -  total flux cleaned = 0.00630562 Jy
! Component: 200  -  total flux cleaned = 0.00580846 Jy
! Total flux subtracted in 200 components = 0.00580846 Jy
! Clean residual min=-0.012411 max=0.010987 Jy/beam
! Clean residual mean=-0.000076 rms=0.002983 Jy/beam
! Combined flux in latest and established models = 2.75389 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 56 components and 2.75389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111577Jy  sigma=1.515799
! Fit after  self-cal, rms=0.105604Jy  sigma=1.487448
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9464 x 2.22 at -5.088 degrees (North through East)
! Clean map  min=-0.010782  max=2.6323 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105604Jy  sigma=1.487448
! Fit after  self-cal, rms=0.090018Jy  sigma=1.064164
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090018Jy  sigma=1.064164
! Fit after  self-cal, rms=0.088087Jy  sigma=1.057069
! Inverting map and beam 
! Estimated beam: bmin=0.9475 mas, bmaj=2.224 mas, bpa=-5.153 degrees
! Estimated noise=1.3302 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00239641 Jy
! Component: 100  -  total flux cleaned = -0.00241035 Jy
! Component: 150  -  total flux cleaned = -0.00221634 Jy
! Component: 200  -  total flux cleaned = -0.00204825 Jy
! Total flux subtracted in 200 components = -0.00204825 Jy
! Clean residual min=-0.006266 max=0.008043 Jy/beam
! Clean residual mean=0.000002 rms=0.001914 Jy/beam
! Combined flux in latest and established models = 2.75184 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 2.75184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087203Jy  sigma=1.036297
! Fit after  self-cal, rms=0.086572Jy  sigma=1.033616
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086572Jy  sigma=1.033616
! Fit after  self-cal, rms=0.085712Jy  sigma=1.011699
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085712Jy  sigma=1.011699
! Fit after  self-cal, rms=0.085614Jy  sigma=1.011179
! Inverting map and beam 
! Estimated beam: bmin=0.9484 mas, bmaj=2.227 mas, bpa=-5.157 degrees
! Estimated noise=1.33058 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000823975 Jy
! Component: 100  -  total flux cleaned = -0.00083472 Jy
! Component: 150  -  total flux cleaned = -0.000688922 Jy
! Component: 200  -  total flux cleaned = -0.000701513 Jy
! Total flux subtracted in 200 components = -0.000701513 Jy
! Clean residual min=-0.006031 max=0.007907 Jy/beam
! Clean residual mean=0.000001 rms=0.001798 Jy/beam
! Combined flux in latest and established models = 2.75114 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 63 components and 2.75114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085069Jy  sigma=0.998695
! Fit after  self-cal, rms=0.084992Jy  sigma=0.998101
! Inverting map 
! Added new window around map position (0.8, 11.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00681131 Jy
! Component: 100  -  total flux cleaned = 0.00940389 Jy
! Component: 150  -  total flux cleaned = 0.0106117 Jy
! Component: 200  -  total flux cleaned = 0.0108795 Jy
! Total flux subtracted in 200 components = 0.0108795 Jy
! Clean residual min=-0.005232 max=0.005420 Jy/beam
! Clean residual mean=-0.000021 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 2.76202 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 2.76202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084069Jy  sigma=0.976523
! Fit after  self-cal, rms=0.083996Jy  sigma=0.975386
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.39 mas, bmaj=4.073 mas, bpa=-10.37 degrees
! Estimated noise=1.70621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00330897 Jy
! Component: 100  -  total flux cleaned = 0.00415256 Jy
! Component: 150  -  total flux cleaned = 0.00464905 Jy
! Component: 200  -  total flux cleaned = 0.00516843 Jy
! Total flux subtracted in 200 components = 0.00516843 Jy
! Clean residual min=-0.004983 max=0.005503 Jy/beam
! Clean residual mean=-0.000047 rms=0.001734 Jy/beam
! Combined flux in latest and established models = 2.76718 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 99 components and 2.76718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084000Jy  sigma=0.974253
! Fit after  self-cal, rms=0.083947Jy  sigma=0.974016
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7596 mas, bmaj=1.898 mas, bpa=-5.224 degrees
! Estimated noise=1.76175 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.26933 Jy
! Component: 100  -  total flux cleaned = 2.58478 Jy
! Component: 150  -  total flux cleaned = 2.67826 Jy
! Component: 200  -  total flux cleaned = 2.72179 Jy
! Total flux subtracted in 200 components = 2.72179 Jy
! Clean residual min=-0.012399 max=0.017964 Jy/beam
! Clean residual mean=0.000015 rms=0.003179 Jy/beam
! Combined flux in latest and established models = 2.72179 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 2.72179 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9484 mas, bmaj=2.227 mas, bpa=-5.157 degrees
! Estimated noise=1.33058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, 2.6).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0234876 Jy
! Component: 100  -  total flux cleaned = 0.035695 Jy
! Component: 150  -  total flux cleaned = 0.0416203 Jy
! Component: 200  -  total flux cleaned = 0.0425538 Jy
! Total flux subtracted in 200 components = 0.0425538 Jy
! Clean residual min=-0.005993 max=0.006464 Jy/beam
! Clean residual mean=-0.000009 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 2.76434 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 51 components and 2.76434 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.39 mas, bmaj=4.073 mas, bpa=-10.37 degrees
! Estimated noise=1.70621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00410247 Jy
! Component: 100  -  total flux cleaned = 0.00532358 Jy
! Component: 150  -  total flux cleaned = 0.00576025 Jy
! Component: 200  -  total flux cleaned = 0.00591116 Jy
! Total flux subtracted in 200 components = 0.00591116 Jy
! Clean residual min=-0.005435 max=0.005808 Jy/beam
! Clean residual mean=-0.000043 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 2.77026 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 2.77026 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9484 mas, bmaj=2.227 mas, bpa=-5.157 degrees
! Estimated noise=1.33058 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00236399 Jy
! Component: 100  -  total flux cleaned = -0.00203751 Jy
! Component: 150  -  total flux cleaned = -0.00189411 Jy
! Component: 200  -  total flux cleaned = -0.00162641 Jy
! Total flux subtracted in 200 components = -0.00162641 Jy
! Clean residual min=-0.005229 max=0.005565 Jy/beam
! Clean residual mean=-0.000022 rms=0.001415 Jy/beam
! Combined flux in latest and established models = 2.76863 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 83 components and 2.76863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084029Jy  sigma=0.971704
! Fit after  self-cal, rms=0.083754Jy  sigma=0.969460
wmodel J2229-0832_X_2004_05_08_yyk\_map.mod
! Writing 83 model components to file: J2229-0832_X_2004_05_08_yyk_map.mod
wobs J2229-0832_X_2004_05_08_yyk\_uvs.fits
! Writing UV FITS file: J2229-0832_X_2004_05_08_yyk_uvs.fits
wwins J2229-0832_X_2004_05_08_yyk\_map.win
! wwins: Wrote 4 windows to J2229-0832_X_2004_05_08_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000798395 Jy
! Component: 100  -  total flux cleaned = -0.00116252 Jy
! Component: 150  -  total flux cleaned = -0.0016673 Jy
! Component: 200  -  total flux cleaned = -0.00245214 Jy
! Component: 250  -  total flux cleaned = -0.00311912 Jy
! Component: 300  -  total flux cleaned = -0.00347092 Jy
! Component: 350  -  total flux cleaned = -0.00373721 Jy
! Component: 400  -  total flux cleaned = -0.00392847 Jy
! Component: 450  -  total flux cleaned = -0.00423702 Jy
! Component: 500  -  total flux cleaned = -0.00447293 Jy
! Component: 550  -  total flux cleaned = -0.0046454 Jy
! Component: 600  -  total flux cleaned = -0.00481329 Jy
! Component: 650  -  total flux cleaned = -0.00486686 Jy
! Component: 700  -  total flux cleaned = -0.00491827 Jy
! Component: 750  -  total flux cleaned = -0.00491786 Jy
! Component: 800  -  total flux cleaned = -0.0048667 Jy
! Component: 850  -  total flux cleaned = -0.00491592 Jy
! Component: 900  -  total flux cleaned = -0.00482126 Jy
! Component: 950  -  total flux cleaned = -0.00505609 Jy
! Component: 1000  -  total flux cleaned = -0.00519398 Jy
! Component: 1050  -  total flux cleaned = -0.00537482 Jy
! Component: 1100  -  total flux cleaned = -0.00559554 Jy
! Component: 1150  -  total flux cleaned = -0.00581211 Jy
! Component: 1200  -  total flux cleaned = -0.00581166 Jy
! Component: 1250  -  total flux cleaned = -0.00589584 Jy
! Component: 1300  -  total flux cleaned = -0.00597893 Jy
! Component: 1350  -  total flux cleaned = -0.0059785 Jy
! Component: 1400  -  total flux cleaned = -0.00589931 Jy
! Component: 1450  -  total flux cleaned = -0.00593906 Jy
! Component: 1500  -  total flux cleaned = -0.00601606 Jy
! Component: 1550  -  total flux cleaned = -0.00586317 Jy
! Component: 1600  -  total flux cleaned = -0.00590126 Jy
! Component: 1650  -  total flux cleaned = -0.00590176 Jy
! Component: 1700  -  total flux cleaned = -0.00590118 Jy
! Component: 1750  -  total flux cleaned = -0.0058283 Jy
! Component: 1800  -  total flux cleaned = -0.00586408 Jy
! Component: 1850  -  total flux cleaned = -0.00582839 Jy
! Component: 1900  -  total flux cleaned = -0.00575823 Jy
! Component: 1950  -  total flux cleaned = -0.00558578 Jy
! Component: 2000  -  total flux cleaned = -0.00555201 Jy
! Total flux subtracted in 2048 components = -0.00541638 Jy
! Clean residual min=-0.002116 max=0.002006 Jy/beam
! Clean residual mean=-0.000004 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 2.76321 Jy
keep
! Adding 119 model components to the UV plane model.
! The established model now contains 202 components and 2.76321 Jy
![Exited script file: muppet]
wmap "J2229-0832_X_2004_05_08_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9484 x 2.227 at -5.157 degrees (North through East)
! Clean map  min=-0.003688  max=2.6333 Jy/beam
! Writing clean map to FITS file: J2229-0832_X_2004_05_08_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.63328 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000606493 
device "J2229-0832_X_2004_05_08_yyk\_map.eps/VPS"
! Attempting to open device: 'J2229-0832_X_2004_05_08_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0690956 0.0690956 0.138191 0.276382 0.552765 1.10553 2.21106 4.42212 8.84423 17.6885 35.3769 70.7539
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0018 
print "peak=",int(peak_flux*1000)/1000
! peak= 2.633 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9484 x 2.227 at -5.157 degrees (North through East)
! Clean map  min=-0.003688  max=2.6333 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2229-0832_X_2004_05_08_yyk\_map.gif/gif"
! Attempting to open device: 'J2229-0832_X_2004_05_08_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J2229-0832_X_2004_05_08_yyk_uvs.log closed on Wed Dec  7 00:56:59 2005