! Started logfile: J2229-0832_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:56:46 2005 obs J2229-0832_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2229-0832_S_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905556 visibilities/baseline/integration-bin. ! Found source: J2229-0832 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1382 lines of history. ! ! Reading 652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2229-0832_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.2089 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.244318Jy sigma=4.749743 ! Fit after self-cal, rms=0.244151Jy sigma=4.746234 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.488 mas, bmaj=6.687 mas, bpa=-3.582 degrees ! Estimated noise=1.95288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.02078 Jy ! Component: 100 - total flux cleaned = 1.17816 Jy ! Total flux subtracted in 100 components = 1.17816 Jy ! Clean residual min=-0.025453 max=0.037357 Jy/beam ! Clean residual mean=-0.000128 rms=0.008040 Jy/beam ! Combined flux in latest and established models = 1.17816 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.17816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131886Jy sigma=2.482382 ! Fit after self-cal, rms=0.131775Jy sigma=2.479832 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=8.576 mas, bpa=-7.146 degrees ! Estimated noise=1.52844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0563679 Jy ! Component: 100 - total flux cleaned = 0.0777971 Jy ! Component: 150 - total flux cleaned = 0.0878247 Jy ! Component: 200 - total flux cleaned = 0.0913605 Jy ! Total flux subtracted in 200 components = 0.0913605 Jy ! Clean residual min=-0.022334 max=0.027984 Jy/beam ! Clean residual mean=-0.000269 rms=0.006633 Jy/beam ! Combined flux in latest and established models = 1.26952 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 41 components and 1.26952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113043Jy sigma=2.140991 ! Fit after self-cal, rms=0.112759Jy sigma=2.136812 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.996599 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.95 KP 0.97 ! LA 1.08 MK 0.98 NL 1.01 OV 0.99 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.977607 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.08 KP 1.00 ! LA 1.04 MK 1.05 NL 1.05 OV 0.99 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01263 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.98 KP 0.98 ! LA 0.94 MK 1.00 NL 1.08 OV 1.01 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02124 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 0.96 KP 0.88 ! LA 1.00* MK 1.00 NL 1.00 OV 1.00* ! PT 0.93 SC 1.11 ! ! ! Fit before self-cal, rms=0.112759Jy sigma=2.136812 ! Fit after self-cal, rms=0.073676Jy sigma=1.396808 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073676Jy sigma=1.396808 ! Fit after self-cal, rms=0.073695Jy sigma=1.396729 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=8.674 mas, bpa=-7.02 degrees ! Estimated noise=1.52151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.016796 Jy ! Component: 100 - total flux cleaned = 0.0182501 Jy ! Component: 150 - total flux cleaned = 0.0188163 Jy ! Component: 200 - total flux cleaned = 0.0186106 Jy ! Total flux subtracted in 200 components = 0.0186106 Jy ! Clean residual min=-0.010051 max=0.010308 Jy/beam ! Clean residual mean=-0.000085 rms=0.002586 Jy/beam ! Combined flux in latest and established models = 1.28813 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 70 components and 1.28813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069314Jy sigma=1.309931 ! Fit after self-cal, rms=0.069037Jy sigma=1.305048 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069037Jy sigma=1.305048 ! Fit after self-cal, rms=0.068129Jy sigma=1.285378 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340831 Jy ! Component: 100 - total flux cleaned = 0.00386426 Jy ! Component: 150 - total flux cleaned = 0.00386432 Jy ! Component: 200 - total flux cleaned = 0.00396703 Jy ! Total flux subtracted in 200 components = 0.00396703 Jy ! Clean residual min=-0.009325 max=0.010033 Jy/beam ! Clean residual mean=-0.000082 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 1.29209 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 1.29209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067562Jy sigma=1.275700 ! Fit after self-cal, rms=0.067465Jy sigma=1.273627 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.319 x 8.674 at -7.02 degrees (North through East) ! Clean map min=-0.0089082 max=1.1836 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067465Jy sigma=1.273627 ! Fit after self-cal, rms=0.055007Jy sigma=1.021735 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055007Jy sigma=1.021735 ! Fit after self-cal, rms=0.055003Jy sigma=1.021659 ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=8.656 mas, bpa=-7.062 degrees ! Estimated noise=1.51995 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050122 Jy ! Component: 100 - total flux cleaned = 0.00558652 Jy ! Component: 150 - total flux cleaned = 0.00602966 Jy ! Component: 200 - total flux cleaned = 0.00634126 Jy ! Total flux subtracted in 200 components = 0.00634126 Jy ! Clean residual min=-0.005536 max=0.004753 Jy/beam ! Clean residual mean=-0.000061 rms=0.001722 Jy/beam ! Combined flux in latest and established models = 1.29844 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 1.29844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054472Jy sigma=1.013455 ! Fit after self-cal, rms=0.054448Jy sigma=1.012879 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054448Jy sigma=1.012879 ! Fit after self-cal, rms=0.050297Jy sigma=0.935164 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050297Jy sigma=0.935164 ! Fit after self-cal, rms=0.050297Jy sigma=0.935162 ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=8.653 mas, bpa=-7.08 degrees ! Estimated noise=1.52046 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284231 Jy ! Component: 100 - total flux cleaned = 0.00308783 Jy ! Component: 150 - total flux cleaned = 0.00323441 Jy ! Component: 200 - total flux cleaned = 0.00336684 Jy ! Total flux subtracted in 200 components = 0.00336684 Jy ! Clean residual min=-0.005317 max=0.004710 Jy/beam ! Clean residual mean=-0.000052 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 1.3018 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 1.3018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050034Jy sigma=0.931034 ! Fit after self-cal, rms=0.050020Jy sigma=0.930709 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.961 mas, bmaj=14.97 mas, bpa=-6.446 degrees ! Estimated noise=1.91257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537671 Jy ! Component: 100 - total flux cleaned = 0.000926822 Jy ! Component: 150 - total flux cleaned = 0.00112178 Jy ! Component: 200 - total flux cleaned = 0.0012921 Jy ! Total flux subtracted in 200 components = 0.0012921 Jy ! Clean residual min=-0.006818 max=0.006230 Jy/beam ! Clean residual mean=-0.000084 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 1.30309 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 123 components and 1.30309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050056Jy sigma=0.929907 ! Fit after self-cal, rms=0.050021Jy sigma=0.929461 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=6.735 mas, bpa=-3.643 degrees ! Estimated noise=1.94157 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.01488 Jy ! Component: 100 - total flux cleaned = 1.16737 Jy ! Component: 150 - total flux cleaned = 1.2159 Jy ! Component: 200 - total flux cleaned = 1.24215 Jy ! Total flux subtracted in 200 components = 1.24215 Jy ! Clean residual min=-0.009258 max=0.010467 Jy/beam ! Clean residual mean=-0.000028 rms=0.002851 Jy/beam ! Combined flux in latest and established models = 1.24215 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.24215 Jy ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=8.653 mas, bpa=-7.08 degrees ! Estimated noise=1.52046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234573 Jy ! Component: 100 - total flux cleaned = 0.036505 Jy ! Component: 150 - total flux cleaned = 0.0448414 Jy ! Component: 200 - total flux cleaned = 0.0504502 Jy ! Total flux subtracted in 200 components = 0.0504502 Jy ! Clean residual min=-0.005769 max=0.004477 Jy/beam ! Clean residual mean=-0.000047 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 1.2926 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 91 components and 1.2926 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.961 mas, bmaj=14.97 mas, bpa=-6.446 degrees ! Estimated noise=1.91257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552245 Jy ! Component: 100 - total flux cleaned = 0.00844137 Jy ! Component: 150 - total flux cleaned = 0.0100615 Jy ! Component: 200 - total flux cleaned = 0.0107535 Jy ! Total flux subtracted in 200 components = 0.0107535 Jy ! Clean residual min=-0.006906 max=0.005931 Jy/beam ! Clean residual mean=-0.000086 rms=0.002216 Jy/beam ! Combined flux in latest and established models = 1.30336 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 1.30336 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=8.653 mas, bpa=-7.08 degrees ! Estimated noise=1.52046 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000559026 Jy ! Component: 100 - total flux cleaned = -0.000349476 Jy ! Component: 150 - total flux cleaned = -0.000173549 Jy ! Component: 200 - total flux cleaned = -7.4504e-05 Jy ! Total flux subtracted in 200 components = -7.4504e-05 Jy ! Clean residual min=-0.005472 max=0.004339 Jy/beam ! Clean residual mean=-0.000055 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 1.30328 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 129 components and 1.30328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049579Jy sigma=0.924334 ! Fit after self-cal, rms=0.049544Jy sigma=0.923536 wmodel J2229-0832_S_2004_05_27_yyk\_map.mod ! Writing 129 model components to file: J2229-0832_S_2004_05_27_yyk_map.mod wobs J2229-0832_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2229-0832_S_2004_05_27_yyk_uvs.fits wwins J2229-0832_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J2229-0832_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00239475 Jy ! Component: 100 - total flux cleaned = -0.00432128 Jy ! Component: 150 - total flux cleaned = -0.00569919 Jy ! Component: 200 - total flux cleaned = -0.00683761 Jy ! Component: 250 - total flux cleaned = -0.00764755 Jy ! Component: 300 - total flux cleaned = -0.00809635 Jy ! Component: 350 - total flux cleaned = -0.00840265 Jy ! Component: 400 - total flux cleaned = -0.00875451 Jy ! Component: 450 - total flux cleaned = -0.00886712 Jy ! Component: 500 - total flux cleaned = -0.00892383 Jy ! Component: 550 - total flux cleaned = -0.00892531 Jy ! Component: 600 - total flux cleaned = -0.00877298 Jy ! Component: 650 - total flux cleaned = -0.00887168 Jy ! Component: 700 - total flux cleaned = -0.00877381 Jy ! Component: 750 - total flux cleaned = -0.00849395 Jy ! Component: 800 - total flux cleaned = -0.00844774 Jy ! Component: 850 - total flux cleaned = -0.00822577 Jy ! Component: 900 - total flux cleaned = -0.00796654 Jy ! Component: 950 - total flux cleaned = -0.00779882 Jy ! Component: 1000 - total flux cleaned = -0.00784053 Jy ! Component: 1050 - total flux cleaned = -0.00767876 Jy ! Component: 1100 - total flux cleaned = -0.00760031 Jy ! Component: 1150 - total flux cleaned = -0.00752314 Jy ! Component: 1200 - total flux cleaned = -0.0073344 Jy ! Component: 1250 - total flux cleaned = -0.00718511 Jy ! Component: 1300 - total flux cleaned = -0.00693072 Jy ! Component: 1350 - total flux cleaned = -0.00682464 Jy ! Component: 1400 - total flux cleaned = -0.00668414 Jy ! Component: 1450 - total flux cleaned = -0.00658099 Jy ! Component: 1500 - total flux cleaned = -0.00648002 Jy ! Component: 1550 - total flux cleaned = -0.00625023 Jy ! Component: 1600 - total flux cleaned = -0.0061537 Jy ! Component: 1650 - total flux cleaned = -0.00615341 Jy ! Component: 1700 - total flux cleaned = -0.0059655 Jy ! Component: 1750 - total flux cleaned = -0.00587321 Jy ! Component: 1800 - total flux cleaned = -0.0057826 Jy ! Component: 1850 - total flux cleaned = -0.00566406 Jy ! Component: 1900 - total flux cleaned = -0.00554723 Jy ! Component: 1950 - total flux cleaned = -0.00543283 Jy ! Component: 2000 - total flux cleaned = -0.00534854 Jy ! Total flux subtracted in 2048 components = -0.00532047 Jy ! Clean residual min=-0.001526 max=0.001483 Jy/beam ! Clean residual mean=-0.000004 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 1.29796 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 280 components and 1.29796 Jy ![Exited script file: muppet] wmap "J2229-0832_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.309 x 8.653 at -7.08 degrees (North through East) ! Clean map min=-0.0031809 max=1.1857 Jy/beam ! Writing clean map to FITS file: J2229-0832_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.18568 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000576199 device "J2229-0832_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2229-0832_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.145789 0.145789 0.291579 0.583158 1.16632 2.33263 4.66526 9.33052 18.661 37.3221 74.6442 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.185 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.309 x 8.653 at -7.08 degrees (North through East) ! Clean map min=-0.0031809 max=1.1857 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2229-0832_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2229-0832_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2229-0832_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:56:50 2005