! Started logfile: J2229-0832_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:56:41 2005 obs J2229-0832_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J2229-0832_S_2004_05_08_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.924444 visibilities/baseline/integration-bin. ! Found source: J2229-0832 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2229-0832_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.08862 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.179566Jy sigma=2.993620 ! Fit after self-cal, rms=0.179475Jy sigma=2.990471 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=6.973 mas, bpa=-5.768 degrees ! Estimated noise=1.89268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.911662 Jy ! Component: 100 - total flux cleaned = 1.05556 Jy ! Total flux subtracted in 100 components = 1.05556 Jy ! Clean residual min=-0.031461 max=0.051909 Jy/beam ! Clean residual mean=0.000387 rms=0.011278 Jy/beam ! Combined flux in latest and established models = 1.05556 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.05556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155992Jy sigma=2.547197 ! Fit after self-cal, rms=0.155935Jy sigma=2.546569 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=8.271 mas, bpa=-7.228 degrees ! Estimated noise=1.50493 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0581217 Jy ! Component: 100 - total flux cleaned = 0.0823504 Jy ! Component: 150 - total flux cleaned = 0.0931774 Jy ! Component: 200 - total flux cleaned = 0.0943321 Jy ! Total flux subtracted in 200 components = 0.0943321 Jy ! Clean residual min=-0.024545 max=0.043181 Jy/beam ! Clean residual mean=0.000413 rms=0.009553 Jy/beam ! Combined flux in latest and established models = 1.14989 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 1.1499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139983Jy sigma=2.264105 ! Fit after self-cal, rms=0.139648Jy sigma=2.258268 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.996933 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 0.95 KP 0.98 ! LA 1.13 MK 1.00 NL 1.00 OV 0.96 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988083 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 1.05 KP 1.01 ! LA 1.10 MK 1.04 NL 1.02 OV 0.97 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02336 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.98 KP 0.97 ! LA 0.92 MK 1.01 NL 1.08 OV 0.97 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.139648Jy sigma=2.258268 ! Fit after self-cal, rms=0.120418Jy sigma=1.865355 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120418Jy sigma=1.865355 ! Fit after self-cal, rms=0.120439Jy sigma=1.865307 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.501 mas, bmaj=8.204 mas, bpa=-6.105 degrees ! Estimated noise=1.5045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786153 Jy ! Component: 100 - total flux cleaned = 0.00982459 Jy ! Component: 150 - total flux cleaned = 0.0111541 Jy ! Component: 200 - total flux cleaned = 0.0122996 Jy ! Total flux subtracted in 200 components = 0.0122996 Jy ! Clean residual min=-0.015655 max=0.028896 Jy/beam ! Clean residual mean=0.000224 rms=0.006376 Jy/beam ! Combined flux in latest and established models = 1.16219 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 1.16219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119312Jy sigma=1.839545 ! Fit after self-cal, rms=0.119168Jy sigma=1.836852 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119168Jy sigma=1.836852 ! Fit after self-cal, rms=0.117078Jy sigma=1.793365 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (45, 56). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223242 Jy ! Component: 100 - total flux cleaned = 0.0231994 Jy ! Component: 150 - total flux cleaned = 0.0227003 Jy ! Component: 200 - total flux cleaned = 0.0231033 Jy ! Total flux subtracted in 200 components = 0.0231033 Jy ! Clean residual min=-0.015006 max=0.019884 Jy/beam ! Clean residual mean=0.000157 rms=0.004997 Jy/beam ! Combined flux in latest and established models = 1.1853 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 1.1853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111273Jy sigma=1.654706 ! Fit after self-cal, rms=0.110760Jy sigma=1.643196 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.501 x 8.204 at -6.105 degrees (North through East) ! Clean map min=-0.017398 max=1.0407 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110760Jy sigma=1.643196 ! Fit after self-cal, rms=0.107468Jy sigma=1.578736 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107468Jy sigma=1.578736 ! Fit after self-cal, rms=0.107522Jy sigma=1.577946 ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.159 mas, bpa=-5.754 degrees ! Estimated noise=1.5069 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00742379 Jy ! Component: 100 - total flux cleaned = 0.00846609 Jy ! Component: 150 - total flux cleaned = 0.00875798 Jy ! Component: 200 - total flux cleaned = 0.00927222 Jy ! Total flux subtracted in 200 components = 0.00927222 Jy ! Clean residual min=-0.016149 max=0.018942 Jy/beam ! Clean residual mean=0.000121 rms=0.004606 Jy/beam ! Combined flux in latest and established models = 1.19457 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 1.19457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106159Jy sigma=1.548168 ! Fit after self-cal, rms=0.106189Jy sigma=1.547209 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106189Jy sigma=1.547209 ! Fit after self-cal, rms=0.097932Jy sigma=1.324620 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097932Jy sigma=1.324620 ! Fit after self-cal, rms=0.097965Jy sigma=1.324524 ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=8.184 mas, bpa=-5.825 degrees ! Estimated noise=1.50512 mJy/beam. ! Added new window around map position (38, -33). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108635 Jy ! Component: 100 - total flux cleaned = 0.0121251 Jy ! Component: 150 - total flux cleaned = 0.0121407 Jy ! Component: 200 - total flux cleaned = 0.0124077 Jy ! Total flux subtracted in 200 components = 0.0124077 Jy ! Clean residual min=-0.010158 max=0.010383 Jy/beam ! Clean residual mean=0.000029 rms=0.002773 Jy/beam ! Combined flux in latest and established models = 1.20698 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 1.20698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095056Jy sigma=1.255653 ! Fit after self-cal, rms=0.094991Jy sigma=1.253375 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.948 mas, bmaj=14.08 mas, bpa=-10.31 degrees ! Estimated noise=1.89925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213662 Jy ! Component: 100 - total flux cleaned = 0.00364824 Jy ! Component: 150 - total flux cleaned = 0.00427012 Jy ! Component: 200 - total flux cleaned = 0.00481551 Jy ! Total flux subtracted in 200 components = 0.00481551 Jy ! Clean residual min=-0.010632 max=0.010696 Jy/beam ! Clean residual mean=0.000030 rms=0.003273 Jy/beam ! Combined flux in latest and established models = 1.21179 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 1.21179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094646Jy sigma=1.244125 ! Fit after self-cal, rms=0.094613Jy sigma=1.242748 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=6.949 mas, bpa=-5.057 degrees ! Estimated noise=1.88183 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.906722 Jy ! Component: 100 - total flux cleaned = 1.05888 Jy ! Component: 150 - total flux cleaned = 1.11029 Jy ! Component: 200 - total flux cleaned = 1.14251 Jy ! Total flux subtracted in 200 components = 1.14251 Jy ! Clean residual min=-0.015501 max=0.022198 Jy/beam ! Clean residual mean=0.000128 rms=0.005329 Jy/beam ! Combined flux in latest and established models = 1.14251 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.14251 Jy ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=8.184 mas, bpa=-5.825 degrees ! Estimated noise=1.50512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356439 Jy ! Component: 100 - total flux cleaned = 0.0549953 Jy ! Component: 150 - total flux cleaned = 0.0657101 Jy ! Component: 200 - total flux cleaned = 0.0700994 Jy ! Total flux subtracted in 200 components = 0.0700994 Jy ! Clean residual min=-0.010384 max=0.010315 Jy/beam ! Clean residual mean=0.000035 rms=0.002914 Jy/beam ! Combined flux in latest and established models = 1.21261 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 74 components and 1.21261 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.948 mas, bmaj=14.08 mas, bpa=-10.31 degrees ! Estimated noise=1.89925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800134 Jy ! Component: 100 - total flux cleaned = 0.00912037 Jy ! Component: 150 - total flux cleaned = 0.00935521 Jy ! Component: 200 - total flux cleaned = 0.00979137 Jy ! Total flux subtracted in 200 components = 0.00979137 Jy ! Clean residual min=-0.009097 max=0.008746 Jy/beam ! Clean residual mean=0.000009 rms=0.002921 Jy/beam ! Combined flux in latest and established models = 1.2224 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 1.2224 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=8.184 mas, bpa=-5.825 degrees ! Estimated noise=1.50512 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152109 Jy ! Component: 100 - total flux cleaned = -0.00203968 Jy ! Component: 150 - total flux cleaned = -0.00250715 Jy ! Component: 200 - total flux cleaned = -0.00272508 Jy ! Total flux subtracted in 200 components = -0.00272508 Jy ! Clean residual min=-0.009406 max=0.008830 Jy/beam ! Clean residual mean=0.000003 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 1.21967 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 127 components and 1.21967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093282Jy sigma=1.224184 ! Fit after self-cal, rms=0.093104Jy sigma=1.221427 wmodel J2229-0832_S_2004_05_08_yyk\_map.mod ! Writing 127 model components to file: J2229-0832_S_2004_05_08_yyk_map.mod wobs J2229-0832_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J2229-0832_S_2004_05_08_yyk_uvs.fits wwins J2229-0832_S_2004_05_08_yyk\_map.win ! wwins: Wrote 4 windows to J2229-0832_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289456 Jy ! Component: 100 - total flux cleaned = 0.00100641 Jy ! Component: 150 - total flux cleaned = 0.00181304 Jy ! Component: 200 - total flux cleaned = 0.0025829 Jy ! Component: 250 - total flux cleaned = 0.00319321 Jy ! Component: 300 - total flux cleaned = 0.00365979 Jy ! Component: 350 - total flux cleaned = 0.00410348 Jy ! Component: 400 - total flux cleaned = 0.00463833 Jy ! Component: 450 - total flux cleaned = 0.00577789 Jy ! Component: 500 - total flux cleaned = 0.00668325 Jy ! Component: 550 - total flux cleaned = 0.00766115 Jy ! Component: 600 - total flux cleaned = 0.00861496 Jy ! Component: 650 - total flux cleaned = 0.00926864 Jy ! Component: 700 - total flux cleaned = 0.010176 Jy ! Component: 750 - total flux cleaned = 0.0111513 Jy ! Component: 800 - total flux cleaned = 0.0116696 Jy ! Component: 850 - total flux cleaned = 0.0121789 Jy ! Component: 900 - total flux cleaned = 0.0125129 Jy ! Component: 950 - total flux cleaned = 0.0130037 Jy ! Component: 1000 - total flux cleaned = 0.0135635 Jy ! Component: 1050 - total flux cleaned = 0.0137213 Jy ! Component: 1100 - total flux cleaned = 0.0142604 Jy ! Component: 1150 - total flux cleaned = 0.0147127 Jy ! Component: 1200 - total flux cleaned = 0.0152287 Jy ! Component: 1250 - total flux cleaned = 0.0154457 Jy ! Component: 1300 - total flux cleaned = 0.0160863 Jy ! Component: 1350 - total flux cleaned = 0.0163644 Jy ! Component: 1400 - total flux cleaned = 0.0167766 Jy ! Component: 1450 - total flux cleaned = 0.0171808 Jy ! Component: 1500 - total flux cleaned = 0.0175124 Jy ! Component: 1550 - total flux cleaned = 0.017708 Jy ! Component: 1600 - total flux cleaned = 0.0179635 Jy ! Component: 1650 - total flux cleaned = 0.0182154 Jy ! Component: 1700 - total flux cleaned = 0.0184641 Jy ! Component: 1750 - total flux cleaned = 0.0188285 Jy ! Component: 1800 - total flux cleaned = 0.0190678 Jy ! Component: 1850 - total flux cleaned = 0.0193041 Jy ! Component: 1900 - total flux cleaned = 0.0197696 Jy ! Component: 1950 - total flux cleaned = 0.0200551 Jy ! Component: 2000 - total flux cleaned = 0.0202253 Jy ! Total flux subtracted in 2048 components = 0.02056 Jy ! Clean residual min=-0.003593 max=0.003111 Jy/beam ! Clean residual mean=-0.000001 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 1.24023 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 246 components and 1.24023 Jy ![Exited script file: muppet] wmap "J2229-0832_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.472 x 8.184 at -5.825 degrees (North through East) ! Clean map min=-0.0060024 max=1.042 Jy/beam ! Writing clean map to FITS file: J2229-0832_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.04197 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00114245 device "J2229-0832_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J2229-0832_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.328929 0.328929 0.657857 1.31571 2.63143 5.26286 10.5257 21.0514 42.1029 84.2057 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.041 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.472 x 8.184 at -5.825 degrees (North through East) ! Clean map min=-0.0060024 max=1.042 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2229-0832_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J2229-0832_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2229-0832_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:56:45 2005