! Started logfile: J2206-2119_X_2004_05_08_yyk_uvs.log on Wed Dec  7 00:55:54 2005
obs J2206-2119_X_2004_05_08_yyk_uve.fits
! Reading UV FITS file: J2206-2119_X_2004_05_08_yyk_uve.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.693651 visibilities/baseline/integration-bin.
! Found source: J2206-2119
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1434 lines of history.
! 
! Reading 1748 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J2206-2119_X_2004_05_08_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.148442 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.875162Jy  sigma=16.557207
! Fit after  self-cal, rms=0.874415Jy  sigma=16.551431
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7518 mas, bmaj=2.288 mas, bpa=12.85 degrees
! Estimated noise=1.27639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.108945 Jy
! Component: 100  -  total flux cleaned = 0.137826 Jy
! Total flux subtracted in 100 components = 0.137826 Jy
! Clean residual min=-0.007461 max=0.009211 Jy/beam
! Clean residual mean=-0.000044 rms=0.001783 Jy/beam
! Combined flux in latest and established models = 0.137826 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.137826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066403Jy  sigma=1.098710
! Fit after  self-cal, rms=0.066326Jy  sigma=1.096801
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9406 mas, bmaj=2.919 mas, bpa=14.72 degrees
! Estimated noise=0.898521 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177513 Jy
! Component: 100  -  total flux cleaned = 0.0241157 Jy
! Component: 150  -  total flux cleaned = 0.026581 Jy
! Component: 200  -  total flux cleaned = 0.0271023 Jy
! Total flux subtracted in 200 components = 0.0271023 Jy
! Clean residual min=-0.004986 max=0.006977 Jy/beam
! Clean residual mean=-0.000031 rms=0.001254 Jy/beam
! Combined flux in latest and established models = 0.164928 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 32 components and 0.164928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063799Jy  sigma=1.029301
! Fit after  self-cal, rms=0.063789Jy  sigma=1.028827
! Inverting map 
! Added new window around map position (2, 1.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00725941 Jy
! Component: 100  -  total flux cleaned = 0.00888165 Jy
! Component: 150  -  total flux cleaned = 0.00941242 Jy
! Component: 200  -  total flux cleaned = 0.00979577 Jy
! Total flux subtracted in 200 components = 0.00979577 Jy
! Clean residual min=-0.004390 max=0.003577 Jy/beam
! Clean residual mean=-0.000011 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 0.174724 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 54 components and 0.174724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063327Jy  sigma=1.015291
! Fit after  self-cal, rms=0.063278Jy  sigma=1.013679
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.0265
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.00     KP        0.95     
!   LA        0.94     MK        0.90     NL        1.01     OV        1.02     
!   PT        1.02     SC        0.95     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.063278Jy  sigma=1.013679
! Fit after  self-cal, rms=0.063353Jy  sigma=1.013075
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063353Jy  sigma=1.013075
! Fit after  self-cal, rms=0.063354Jy  sigma=1.013072
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.935 mas, bmaj=2.894 mas, bpa=14.64 degrees
! Estimated noise=0.901215 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234381 Jy
! Component: 100  -  total flux cleaned = 0.00261391 Jy
! Component: 150  -  total flux cleaned = 0.00261502 Jy
! Component: 200  -  total flux cleaned = 0.00266567 Jy
! Total flux subtracted in 200 components = 0.00266567 Jy
! Clean residual min=-0.004054 max=0.003281 Jy/beam
! Clean residual mean=-0.000007 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.177389 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 68 components and 0.177389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063284Jy  sigma=1.010946
! Fit after  self-cal, rms=0.063282Jy  sigma=1.010788
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063282Jy  sigma=1.010788
! Fit after  self-cal, rms=0.060699Jy  sigma=0.964701
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137523 Jy
! Component: 100  -  total flux cleaned = 0.00142682 Jy
! Component: 150  -  total flux cleaned = 0.0014254 Jy
! Component: 200  -  total flux cleaned = 0.00138007 Jy
! Total flux subtracted in 200 components = 0.00138007 Jy
! Clean residual min=-0.003869 max=0.003230 Jy/beam
! Clean residual mean=-0.000006 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.178769 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 78 components and 0.178769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060663Jy  sigma=0.963336
! Fit after  self-cal, rms=0.060369Jy  sigma=0.961017
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.935 x 2.894 at 14.64 degrees (North through East)
! Clean map  min=-0.0036342  max=0.13127 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060369Jy  sigma=0.961017
! Fit after  self-cal, rms=0.059160Jy  sigma=0.949944
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059160Jy  sigma=0.949944
! Fit after  self-cal, rms=0.059072Jy  sigma=0.949692
! Inverting map and beam 
! Estimated beam: bmin=0.9286 mas, bmaj=2.835 mas, bpa=14 degrees
! Estimated noise=0.88489 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012745 Jy
! Component: 100  -  total flux cleaned = -0.00156395 Jy
! Component: 150  -  total flux cleaned = -0.00160597 Jy
! Component: 200  -  total flux cleaned = -0.00171492 Jy
! Total flux subtracted in 200 components = -0.00171492 Jy
! Clean residual min=-0.003129 max=0.002950 Jy/beam
! Clean residual mean=-0.000001 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.177054 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 96 components and 0.177054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059021Jy  sigma=0.948373
! Fit after  self-cal, rms=0.058977Jy  sigma=0.948296
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058977Jy  sigma=0.948296
! Fit after  self-cal, rms=0.058370Jy  sigma=0.941890
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058370Jy  sigma=0.941890
! Fit after  self-cal, rms=0.058363Jy  sigma=0.941723
! Inverting map and beam 
! Estimated beam: bmin=0.931 mas, bmaj=2.852 mas, bpa=14.28 degrees
! Estimated noise=0.872992 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00121077 Jy
! Component: 100  -  total flux cleaned = -0.00134926 Jy
! Component: 150  -  total flux cleaned = -0.00142641 Jy
! Component: 200  -  total flux cleaned = -0.00142758 Jy
! Total flux subtracted in 200 components = -0.00142758 Jy
! Clean residual min=-0.002898 max=0.002668 Jy/beam
! Clean residual mean=-0.000002 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.175627 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 111 components and 0.175627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058289Jy  sigma=0.940128
! Fit after  self-cal, rms=0.058278Jy  sigma=0.940081
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.138 mas, bmaj=5.071 mas, bpa=7.364 degrees
! Estimated noise=1.09064 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 9.59262e-05 Jy
! Component: 100  -  total flux cleaned = -1.84692e-05 Jy
! Component: 150  -  total flux cleaned = -4.85023e-05 Jy
! Component: 200  -  total flux cleaned = -4.76863e-05 Jy
! Total flux subtracted in 200 components = -4.76863e-05 Jy
! Clean residual min=-0.003232 max=0.002948 Jy/beam
! Clean residual mean=-0.000008 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.175579 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 124 components and 0.175579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058279Jy  sigma=0.940018
! Fit after  self-cal, rms=0.058273Jy  sigma=0.939995
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7483 mas, bmaj=2.27 mas, bpa=12.66 degrees
! Estimated noise=1.24031 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.107295 Jy
! Component: 100  -  total flux cleaned = 0.136131 Jy
! Component: 150  -  total flux cleaned = 0.150041 Jy
! Component: 200  -  total flux cleaned = 0.158035 Jy
! Total flux subtracted in 200 components = 0.158035 Jy
! Clean residual min=-0.004934 max=0.004137 Jy/beam
! Clean residual mean=-0.000016 rms=0.001225 Jy/beam
! Combined flux in latest and established models = 0.158035 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.158035 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.931 mas, bmaj=2.852 mas, bpa=14.28 degrees
! Estimated noise=0.872992 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00786679 Jy
! Component: 100  -  total flux cleaned = 0.012367 Jy
! Component: 150  -  total flux cleaned = 0.0152868 Jy
! Component: 200  -  total flux cleaned = 0.0161512 Jy
! Total flux subtracted in 200 components = 0.0161512 Jy
! Clean residual min=-0.003266 max=0.002888 Jy/beam
! Clean residual mean=-0.000007 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.174186 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 54 components and 0.174186 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.138 mas, bmaj=5.071 mas, bpa=7.364 degrees
! Estimated noise=1.09064 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157915 Jy
! Component: 100  -  total flux cleaned = 0.00162774 Jy
! Component: 150  -  total flux cleaned = 0.00162643 Jy
! Component: 200  -  total flux cleaned = 0.00159139 Jy
! Total flux subtracted in 200 components = 0.00159139 Jy
! Clean residual min=-0.003264 max=0.002971 Jy/beam
! Clean residual mean=-0.000008 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.175778 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 64 components and 0.175778 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.931 mas, bmaj=2.852 mas, bpa=14.28 degrees
! Estimated noise=0.872992 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000388611 Jy
! Component: 100  -  total flux cleaned = -0.000445067 Jy
! Component: 150  -  total flux cleaned = -0.000495447 Jy
! Component: 200  -  total flux cleaned = -0.000448383 Jy
! Total flux subtracted in 200 components = -0.000448383 Jy
! Clean residual min=-0.002956 max=0.002675 Jy/beam
! Clean residual mean=-0.000003 rms=0.000712 Jy/beam
! Combined flux in latest and established models = 0.175329 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.175329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058306Jy  sigma=0.941566
! Fit after  self-cal, rms=0.058282Jy  sigma=0.941321
wmodel J2206-2119_X_2004_05_08_yyk\_map.mod
! Writing 77 model components to file: J2206-2119_X_2004_05_08_yyk_map.mod
wobs J2206-2119_X_2004_05_08_yyk\_uvs.fits
! Writing UV FITS file: J2206-2119_X_2004_05_08_yyk_uvs.fits
wwins J2206-2119_X_2004_05_08_yyk\_map.win
! wwins: Wrote 2 windows to J2206-2119_X_2004_05_08_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138588 Jy
! Component: 100  -  total flux cleaned = 0.00026399 Jy
! Component: 150  -  total flux cleaned = 0.000388864 Jy
! Component: 200  -  total flux cleaned = 0.000195124 Jy
! Component: 250  -  total flux cleaned = 0.000120079 Jy
! Component: 300  -  total flux cleaned = -6.21808e-05 Jy
! Component: 350  -  total flux cleaned = -0.00013254 Jy
! Component: 400  -  total flux cleaned = -0.000236149 Jy
! Component: 450  -  total flux cleaned = -0.000404713 Jy
! Component: 500  -  total flux cleaned = -0.000569008 Jy
! Component: 550  -  total flux cleaned = -0.000568876 Jy
! Component: 600  -  total flux cleaned = -0.000696196 Jy
! Component: 650  -  total flux cleaned = -0.000820438 Jy
! Component: 700  -  total flux cleaned = -0.00091158 Jy
! Component: 750  -  total flux cleaned = -0.000941437 Jy
! Component: 800  -  total flux cleaned = -0.00105896 Jy
! Component: 850  -  total flux cleaned = -0.00120262 Jy
! Component: 900  -  total flux cleaned = -0.00117423 Jy
! Component: 950  -  total flux cleaned = -0.00134119 Jy
! Component: 1000  -  total flux cleaned = -0.00134116 Jy
! Component: 1050  -  total flux cleaned = -0.00144934 Jy
! Component: 1100  -  total flux cleaned = -0.00139643 Jy
! Component: 1150  -  total flux cleaned = -0.00150208 Jy
! Component: 1200  -  total flux cleaned = -0.0015023 Jy
! Component: 1250  -  total flux cleaned = -0.0015537 Jy
! Component: 1300  -  total flux cleaned = -0.00150348 Jy
! Component: 1350  -  total flux cleaned = -0.00152833 Jy
! Component: 1400  -  total flux cleaned = -0.00155266 Jy
! Component: 1450  -  total flux cleaned = -0.00147927 Jy
! Component: 1500  -  total flux cleaned = -0.0014792 Jy
! Component: 1550  -  total flux cleaned = -0.00150288 Jy
! Component: 1600  -  total flux cleaned = -0.00152592 Jy
! Component: 1650  -  total flux cleaned = -0.00150257 Jy
! Component: 1700  -  total flux cleaned = -0.00152564 Jy
! Component: 1750  -  total flux cleaned = -0.00152562 Jy
! Component: 1800  -  total flux cleaned = -0.00152588 Jy
! Component: 1850  -  total flux cleaned = -0.00150398 Jy
! Component: 1900  -  total flux cleaned = -0.00154824 Jy
! Component: 1950  -  total flux cleaned = -0.00146133 Jy
! Component: 2000  -  total flux cleaned = -0.00146131 Jy
! Total flux subtracted in 2048 components = -0.00146152 Jy
! Clean residual min=-0.001112 max=0.001224 Jy/beam
! Clean residual mean=-0.000005 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.173868 Jy
keep
! Adding 130 model components to the UV plane model.
! The established model now contains 207 components and 0.173868 Jy
![Exited script file: muppet]
wmap "J2206-2119_X_2004_05_08_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.931 x 2.852 at 14.28 degrees (North through East)
! Clean map  min=-0.0020325  max=0.12669 Jy/beam
! Writing clean map to FITS file: J2206-2119_X_2004_05_08_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.126694 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000413286 
device "J2206-2119_X_2004_05_08_yyk\_map.eps/VPS"
! Attempting to open device: 'J2206-2119_X_2004_05_08_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.978624 0.978624 1.95725 3.91449 7.82899 15.658 31.316 62.6319
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.126 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.931 x 2.852 at 14.28 degrees (North through East)
! Clean map  min=-0.0020325  max=0.12669 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2206-2119_X_2004_05_08_yyk\_map.gif/gif"
! Attempting to open device: 'J2206-2119_X_2004_05_08_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J2206-2119_X_2004_05_08_yyk_uvs.log closed on Wed Dec  7 00:55:58 2005