! Started logfile: J2206-2119_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:55:50 2005 obs J2206-2119_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J2206-2119_S_2004_05_08_yyk_uve.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J2206-2119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 2016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2206-2119_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.133531 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901135Jy sigma=15.673395 ! Fit after self-cal, rms=0.894596Jy sigma=15.575293 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=6.558 mas, bpa=-3.451 degrees ! Estimated noise=1.39898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0896884 Jy ! Component: 100 - total flux cleaned = 0.11332 Jy ! Total flux subtracted in 100 components = 0.11332 Jy ! Clean residual min=-0.008438 max=0.010225 Jy/beam ! Clean residual mean=0.000015 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 0.11332 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.11332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074071Jy sigma=1.163465 ! Fit after self-cal, rms=0.073967Jy sigma=1.162762 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.008 mas, bpa=-2.937 degrees ! Estimated noise=0.951296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.017078 Jy ! Component: 100 - total flux cleaned = 0.0241292 Jy ! Component: 150 - total flux cleaned = 0.02715 Jy ! Component: 200 - total flux cleaned = 0.0275567 Jy ! Total flux subtracted in 200 components = 0.0275567 Jy ! Clean residual min=-0.004874 max=0.006681 Jy/beam ! Clean residual mean=-0.000038 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.140876 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.140876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071506Jy sigma=1.112121 ! Fit after self-cal, rms=0.071479Jy sigma=1.111978 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03748 ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.96 HN 1.05 KP 0.97 ! LA 1.03 MK 0.87 NL 1.00 OV 0.96 ! PT 1.03 SC 0.92 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0175 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.06 KP 0.99 ! LA 1.03 MK 0.99 NL 1.09 OV 1.01 ! PT 0.90 SC 0.86 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.071479Jy sigma=1.111978 ! Fit after self-cal, rms=0.071092Jy sigma=1.104789 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071092Jy sigma=1.104789 ! Fit after self-cal, rms=0.071093Jy sigma=1.104768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=7.78 mas, bpa=-2.205 degrees ! Estimated noise=0.946713 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259752 Jy ! Component: 100 - total flux cleaned = 0.00279932 Jy ! Component: 150 - total flux cleaned = 0.00291983 Jy ! Component: 200 - total flux cleaned = 0.00308641 Jy ! Total flux subtracted in 200 components = 0.00308641 Jy ! Clean residual min=-0.004862 max=0.005830 Jy/beam ! Clean residual mean=-0.000020 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.143963 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.143963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070915Jy sigma=1.102631 ! Fit after self-cal, rms=0.070904Jy sigma=1.102568 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070904Jy sigma=1.102568 ! Fit after self-cal, rms=0.066217Jy sigma=1.030470 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152535 Jy ! Component: 100 - total flux cleaned = 0.00161445 Jy ! Component: 150 - total flux cleaned = 0.00181905 Jy ! Component: 200 - total flux cleaned = 0.0019987 Jy ! Total flux subtracted in 200 components = 0.0019987 Jy ! Clean residual min=-0.004393 max=0.005037 Jy/beam ! Clean residual mean=-0.000018 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.145961 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.145961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066072Jy sigma=1.027778 ! Fit after self-cal, rms=0.065843Jy sigma=1.024665 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.041 x 7.78 at -2.205 degrees (North through East) ! Clean map min=-0.0043385 max=0.10715 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065843Jy sigma=1.024665 ! Fit after self-cal, rms=0.063480Jy sigma=1.015032 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063480Jy sigma=1.015032 ! Fit after self-cal, rms=0.063467Jy sigma=1.014725 ! Inverting map and beam ! Estimated beam: bmin=2.988 mas, bmaj=7.67 mas, bpa=-1.339 degrees ! Estimated noise=0.915411 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00259102 Jy ! Component: 100 - total flux cleaned = -0.00246302 Jy ! Component: 150 - total flux cleaned = -0.00229264 Jy ! Component: 200 - total flux cleaned = -0.00213851 Jy ! Total flux subtracted in 200 components = -0.00213851 Jy ! Clean residual min=-0.004225 max=0.004054 Jy/beam ! Clean residual mean=-0.000042 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.143823 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.143823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063317Jy sigma=1.011995 ! Fit after self-cal, rms=0.063316Jy sigma=1.011927 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063316Jy sigma=1.011927 ! Fit after self-cal, rms=0.063698Jy sigma=1.013277 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063698Jy sigma=1.013277 ! Fit after self-cal, rms=0.063711Jy sigma=1.013160 ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=7.615 mas, bpa=-1.111 degrees ! Estimated noise=0.896931 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197165 Jy ! Component: 100 - total flux cleaned = -0.00197494 Jy ! Component: 150 - total flux cleaned = -0.00197379 Jy ! Component: 200 - total flux cleaned = -0.00189589 Jy ! Total flux subtracted in 200 components = -0.00189589 Jy ! Clean residual min=-0.004045 max=0.003919 Jy/beam ! Clean residual mean=-0.000029 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.141927 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.141927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063651Jy sigma=1.011357 ! Fit after self-cal, rms=0.063655Jy sigma=1.011309 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.583 mas, bmaj=16.73 mas, bpa=6.4 degrees ! Estimated noise=1.18323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181692 Jy ! Component: 100 - total flux cleaned = 0.00191704 Jy ! Component: 150 - total flux cleaned = 0.00204259 Jy ! Component: 200 - total flux cleaned = 0.0021313 Jy ! Total flux subtracted in 200 components = 0.0021313 Jy ! Clean residual min=-0.003852 max=0.004032 Jy/beam ! Clean residual mean=-0.000073 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.144058 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 54 components and 0.144058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063628Jy sigma=1.011300 ! Fit after self-cal, rms=0.063630Jy sigma=1.011226 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.423 mas, bmaj=6.437 mas, bpa=-2.664 degrees ! Estimated noise=1.31566 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0877365 Jy ! Component: 100 - total flux cleaned = 0.112027 Jy ! Component: 150 - total flux cleaned = 0.124424 Jy ! Component: 200 - total flux cleaned = 0.131479 Jy ! Total flux subtracted in 200 components = 0.131479 Jy ! Clean residual min=-0.005503 max=0.006054 Jy/beam ! Clean residual mean=-0.000006 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.131479 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.131479 Jy ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=7.615 mas, bpa=-1.111 degrees ! Estimated noise=0.896931 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066861 Jy ! Component: 100 - total flux cleaned = 0.0091536 Jy ! Component: 150 - total flux cleaned = 0.0101174 Jy ! Component: 200 - total flux cleaned = 0.010965 Jy ! Total flux subtracted in 200 components = 0.010965 Jy ! Clean residual min=-0.003645 max=0.003753 Jy/beam ! Clean residual mean=-0.000030 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.142444 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 63 components and 0.142444 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.583 mas, bmaj=16.73 mas, bpa=6.4 degrees ! Estimated noise=1.18323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325329 Jy ! Component: 100 - total flux cleaned = 0.00390678 Jy ! Component: 150 - total flux cleaned = 0.00413432 Jy ! Component: 200 - total flux cleaned = 0.00439425 Jy ! Total flux subtracted in 200 components = 0.00439425 Jy ! Clean residual min=-0.003659 max=0.003764 Jy/beam ! Clean residual mean=-0.000086 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.146839 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 0.146839 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=7.615 mas, bpa=-1.111 degrees ! Estimated noise=0.896931 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110307 Jy ! Component: 100 - total flux cleaned = -0.00109988 Jy ! Component: 150 - total flux cleaned = -0.001053 Jy ! Component: 200 - total flux cleaned = -0.00101218 Jy ! Total flux subtracted in 200 components = -0.00101218 Jy ! Clean residual min=-0.003653 max=0.003773 Jy/beam ! Clean residual mean=-0.000038 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.145826 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.145826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063453Jy sigma=1.005601 ! Fit after self-cal, rms=0.063385Jy sigma=1.004980 wmodel J2206-2119_S_2004_05_08_yyk\_map.mod ! Writing 80 model components to file: J2206-2119_S_2004_05_08_yyk_map.mod wobs J2206-2119_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J2206-2119_S_2004_05_08_yyk_uvs.fits wwins J2206-2119_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J2206-2119_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020337 Jy ! Component: 100 - total flux cleaned = 0.000508691 Jy ! Component: 150 - total flux cleaned = 0.000397175 Jy ! Component: 200 - total flux cleaned = 0.000234828 Jy ! Component: 250 - total flux cleaned = 0.000234489 Jy ! Component: 300 - total flux cleaned = 0.000481048 Jy ! Component: 350 - total flux cleaned = 0.000670677 Jy ! Component: 400 - total flux cleaned = 0.000577855 Jy ! Component: 450 - total flux cleaned = 0.000398785 Jy ! Component: 500 - total flux cleaned = 0.000267558 Jy ! Component: 550 - total flux cleaned = 0.00022346 Jy ! Component: 600 - total flux cleaned = -2.94969e-05 Jy ! Component: 650 - total flux cleaned = -0.000277163 Jy ! Component: 700 - total flux cleaned = -0.000600943 Jy ! Component: 750 - total flux cleaned = -0.000799532 Jy ! Component: 800 - total flux cleaned = -0.00103397 Jy ! Component: 850 - total flux cleaned = -0.00134121 Jy ! Component: 900 - total flux cleaned = -0.00152918 Jy ! Component: 950 - total flux cleaned = -0.00167727 Jy ! Component: 1000 - total flux cleaned = -0.00171467 Jy ! Component: 1050 - total flux cleaned = -0.00196724 Jy ! Component: 1100 - total flux cleaned = -0.00203817 Jy ! Component: 1150 - total flux cleaned = -0.00214335 Jy ! Component: 1200 - total flux cleaned = -0.00204095 Jy ! Component: 1250 - total flux cleaned = -0.00227902 Jy ! Component: 1300 - total flux cleaned = -0.00224549 Jy ! Component: 1350 - total flux cleaned = -0.00234439 Jy ! Component: 1400 - total flux cleaned = -0.00237653 Jy ! Component: 1450 - total flux cleaned = -0.00240884 Jy ! Component: 1500 - total flux cleaned = -0.0024722 Jy ! Component: 1550 - total flux cleaned = -0.00250315 Jy ! Component: 1600 - total flux cleaned = -0.00247278 Jy ! Component: 1650 - total flux cleaned = -0.00250321 Jy ! Component: 1700 - total flux cleaned = -0.00250373 Jy ! Component: 1750 - total flux cleaned = -0.00253342 Jy ! Component: 1800 - total flux cleaned = -0.00259289 Jy ! Component: 1850 - total flux cleaned = -0.00273798 Jy ! Component: 1900 - total flux cleaned = -0.00279508 Jy ! Component: 1950 - total flux cleaned = -0.00287976 Jy ! Component: 2000 - total flux cleaned = -0.00287909 Jy ! Total flux subtracted in 2048 components = -0.00293462 Jy ! Clean residual min=-0.001874 max=0.001486 Jy/beam ! Clean residual mean=-0.000032 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.142892 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 217 components and 0.142892 Jy ![Exited script file: muppet] wmap "J2206-2119_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.96 x 7.615 at -1.111 degrees (North through East) ! Clean map min=-0.003238 max=0.10078 Jy/beam ! Writing clean map to FITS file: J2206-2119_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100775 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000580632 device "J2206-2119_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J2206-2119_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.7285 1.7285 3.45699 6.91398 13.828 27.6559 55.3119 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.96 x 7.615 at -1.111 degrees (North through East) ! Clean map min=-0.003238 max=0.10078 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2206-2119_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J2206-2119_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2206-2119_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:55:54 2005