! Started logfile: J2158-3013_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:55:26 2005 obs J2158-3013_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J2158-3013_S_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.755556 visibilities/baseline/integration-bin. ! Found source: J2158-3013 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2158-3013_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.207258 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.814680Jy sigma=12.175723 ! Fit after self-cal, rms=0.814237Jy sigma=12.169662 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=6.612 mas, bpa=5.002 degrees ! Estimated noise=2.83042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.159964 Jy ! Component: 100 - total flux cleaned = 0.183792 Jy ! Total flux subtracted in 100 components = 0.183792 Jy ! Clean residual min=-0.012943 max=0.015585 Jy/beam ! Clean residual mean=0.000127 rms=0.003683 Jy/beam ! Combined flux in latest and established models = 0.183792 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.183792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082829Jy sigma=1.087285 ! Fit after self-cal, rms=0.082793Jy sigma=1.087023 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=7.878 mas, bpa=2.636 degrees ! Estimated noise=2.10534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115943 Jy ! Component: 100 - total flux cleaned = 0.0158178 Jy ! Component: 150 - total flux cleaned = 0.0165425 Jy ! Component: 200 - total flux cleaned = 0.0167703 Jy ! Total flux subtracted in 200 components = 0.0167703 Jy ! Clean residual min=-0.011253 max=0.012423 Jy/beam ! Clean residual mean=0.000266 rms=0.003466 Jy/beam ! Combined flux in latest and established models = 0.200562 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 0.200562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081344Jy sigma=1.068250 ! Fit after self-cal, rms=0.081318Jy sigma=1.068106 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00489 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.07 HN 1.00* KP 0.96 ! LA 1.02 MK 0.99 NL 1.04 OV 0.97 ! PT 0.94 SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00588 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 1.00* KP 0.93 ! LA 1.03 MK 1.09 NL 1.00 OV 1.00 ! PT 0.84 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.081318Jy sigma=1.068106 ! Fit after self-cal, rms=0.079843Jy sigma=1.047951 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079843Jy sigma=1.047951 ! Fit after self-cal, rms=0.079852Jy sigma=1.047904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.817 mas, bpa=3.919 degrees ! Estimated noise=2.10013 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016543 Jy ! Component: 100 - total flux cleaned = 0.00182088 Jy ! Component: 150 - total flux cleaned = 0.00197059 Jy ! Component: 200 - total flux cleaned = 0.00203832 Jy ! Total flux subtracted in 200 components = 0.00203832 Jy ! Clean residual min=-0.009311 max=0.010054 Jy/beam ! Clean residual mean=0.000165 rms=0.002924 Jy/beam ! Combined flux in latest and established models = 0.202601 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.202601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079746Jy sigma=1.045427 ! Fit after self-cal, rms=0.079723Jy sigma=1.045330 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079723Jy sigma=1.045330 ! Fit after self-cal, rms=0.076389Jy sigma=1.001160 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000943951 Jy ! Component: 100 - total flux cleaned = 0.00115411 Jy ! Component: 150 - total flux cleaned = 0.00127423 Jy ! Component: 200 - total flux cleaned = 0.00138053 Jy ! Total flux subtracted in 200 components = 0.00138053 Jy ! Clean residual min=-0.009187 max=0.009822 Jy/beam ! Clean residual mean=0.000164 rms=0.002882 Jy/beam ! Combined flux in latest and established models = 0.203981 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.203981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076294Jy sigma=0.999830 ! Fit after self-cal, rms=0.076139Jy sigma=0.997616 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.817 at 3.919 degrees (North through East) ! Clean map min=-0.008757 max=0.17689 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076139Jy sigma=0.997616 ! Fit after self-cal, rms=0.075296Jy sigma=0.996795 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075296Jy sigma=0.996795 ! Fit after self-cal, rms=0.075285Jy sigma=0.996636 ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=7.766 mas, bpa=4.285 degrees ! Estimated noise=2.08533 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303682 Jy ! Component: 100 - total flux cleaned = 1.45123e-05 Jy ! Component: 150 - total flux cleaned = 0.000287237 Jy ! Component: 200 - total flux cleaned = 0.000387037 Jy ! Total flux subtracted in 200 components = 0.000387037 Jy ! Clean residual min=-0.008760 max=0.009724 Jy/beam ! Clean residual mean=0.000168 rms=0.002811 Jy/beam ! Combined flux in latest and established models = 0.204368 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.204368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075274Jy sigma=0.995328 ! Fit after self-cal, rms=0.075266Jy sigma=0.995278 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075266Jy sigma=0.995278 ! Fit after self-cal, rms=0.076170Jy sigma=0.992347 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076170Jy sigma=0.992347 ! Fit after self-cal, rms=0.076187Jy sigma=0.992288 ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=7.765 mas, bpa=4.296 degrees ! Estimated noise=2.09084 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656255 Jy ! Component: 100 - total flux cleaned = 0.000778465 Jy ! Component: 150 - total flux cleaned = 0.000814238 Jy ! Component: 200 - total flux cleaned = 0.00085118 Jy ! Total flux subtracted in 200 components = 0.00085118 Jy ! Clean residual min=-0.008988 max=0.009918 Jy/beam ! Clean residual mean=0.000156 rms=0.002801 Jy/beam ! Combined flux in latest and established models = 0.205219 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.205219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076160Jy sigma=0.991744 ! Fit after self-cal, rms=0.076155Jy sigma=0.991698 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.409 mas, bmaj=23.63 mas, bpa=11.64 degrees ! Estimated noise=2.69725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273627 Jy ! Component: 100 - total flux cleaned = 0.0027511 Jy ! Component: 150 - total flux cleaned = 0.00290427 Jy ! Component: 200 - total flux cleaned = 0.00312127 Jy ! Total flux subtracted in 200 components = 0.00312127 Jy ! Clean residual min=-0.009533 max=0.010355 Jy/beam ! Clean residual mean=0.000268 rms=0.003712 Jy/beam ! Combined flux in latest and established models = 0.208341 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.208341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076168Jy sigma=0.993250 ! Fit after self-cal, rms=0.076095Jy sigma=0.991618 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=6.591 mas, bpa=5.653 degrees ! Estimated noise=2.80275 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.159764 Jy ! Component: 100 - total flux cleaned = 0.186453 Jy ! Component: 150 - total flux cleaned = 0.195296 Jy ! Component: 200 - total flux cleaned = 0.197305 Jy ! Total flux subtracted in 200 components = 0.197305 Jy ! Clean residual min=-0.012025 max=0.012557 Jy/beam ! Clean residual mean=0.000082 rms=0.003118 Jy/beam ! Combined flux in latest and established models = 0.197305 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.197305 Jy ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=7.765 mas, bpa=4.296 degrees ! Estimated noise=2.09084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039625 Jy ! Component: 100 - total flux cleaned = 0.00451791 Jy ! Component: 150 - total flux cleaned = 0.00499821 Jy ! Component: 200 - total flux cleaned = 0.00534178 Jy ! Total flux subtracted in 200 components = 0.00534178 Jy ! Clean residual min=-0.009354 max=0.009607 Jy/beam ! Clean residual mean=0.000175 rms=0.002892 Jy/beam ! Combined flux in latest and established models = 0.202647 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.202647 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.409 mas, bmaj=23.63 mas, bpa=11.64 degrees ! Estimated noise=2.69725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334658 Jy ! Component: 100 - total flux cleaned = 0.003457 Jy ! Component: 150 - total flux cleaned = 0.00378145 Jy ! Component: 200 - total flux cleaned = 0.00417457 Jy ! Total flux subtracted in 200 components = 0.00417457 Jy ! Clean residual min=-0.009780 max=0.010640 Jy/beam ! Clean residual mean=0.000293 rms=0.003797 Jy/beam ! Combined flux in latest and established models = 0.206821 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 28 components and 0.206821 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=7.765 mas, bpa=4.296 degrees ! Estimated noise=2.09084 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203605 Jy ! Component: 100 - total flux cleaned = -0.00185097 Jy ! Component: 150 - total flux cleaned = -0.00185805 Jy ! Component: 200 - total flux cleaned = -0.00185432 Jy ! Total flux subtracted in 200 components = -0.00185432 Jy ! Clean residual min=-0.009176 max=0.009512 Jy/beam ! Clean residual mean=0.000158 rms=0.002806 Jy/beam ! Combined flux in latest and established models = 0.204967 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.204967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076115Jy sigma=0.992363 ! Fit after self-cal, rms=0.076111Jy sigma=0.992210 wmodel J2158-3013_S_2004_05_08_yyk\_map.mod ! Writing 35 model components to file: J2158-3013_S_2004_05_08_yyk_map.mod wobs J2158-3013_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J2158-3013_S_2004_05_08_yyk_uvs.fits wwins J2158-3013_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J2158-3013_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118092 Jy ! Component: 100 - total flux cleaned = -0.000118858 Jy ! Component: 150 - total flux cleaned = -0.000691985 Jy ! Component: 200 - total flux cleaned = -0.000960106 Jy ! Component: 250 - total flux cleaned = -0.00133323 Jy ! Component: 300 - total flux cleaned = -0.0017927 Jy ! Component: 350 - total flux cleaned = -0.00179421 Jy ! Component: 400 - total flux cleaned = -0.00169132 Jy ! Component: 450 - total flux cleaned = -0.00159408 Jy ! Component: 500 - total flux cleaned = -0.00114145 Jy ! Component: 550 - total flux cleaned = -0.000618663 Jy ! Component: 600 - total flux cleaned = -3.09408e-05 Jy ! Component: 650 - total flux cleaned = 0.000531706 Jy ! Component: 700 - total flux cleaned = 0.000763858 Jy ! Component: 750 - total flux cleaned = 0.000987858 Jy ! Component: 800 - total flux cleaned = 0.00120289 Jy ! Component: 850 - total flux cleaned = 0.00141039 Jy ! Component: 900 - total flux cleaned = 0.00154636 Jy ! Component: 950 - total flux cleaned = 0.0016792 Jy ! Component: 1000 - total flux cleaned = 0.00174433 Jy ! Component: 1050 - total flux cleaned = 0.00180806 Jy ! Component: 1100 - total flux cleaned = 0.00180929 Jy ! Component: 1150 - total flux cleaned = 0.00192665 Jy ! Component: 1200 - total flux cleaned = 0.00203982 Jy ! Component: 1250 - total flux cleaned = 0.0020397 Jy ! Component: 1300 - total flux cleaned = 0.00193007 Jy ! Component: 1350 - total flux cleaned = 0.0017702 Jy ! Component: 1400 - total flux cleaned = 0.00166563 Jy ! Component: 1450 - total flux cleaned = 0.00151267 Jy ! Component: 1500 - total flux cleaned = 0.00136182 Jy ! Component: 1550 - total flux cleaned = 0.00131293 Jy ! Component: 1600 - total flux cleaned = 0.00121558 Jy ! Component: 1650 - total flux cleaned = 0.00116841 Jy ! Component: 1700 - total flux cleaned = 0.00112135 Jy ! Component: 1750 - total flux cleaned = 0.00084572 Jy ! Component: 1800 - total flux cleaned = 0.000890823 Jy ! Component: 1850 - total flux cleaned = 0.000800351 Jy ! Component: 1900 - total flux cleaned = 0.000711212 Jy ! Component: 1950 - total flux cleaned = 0.000623328 Jy ! Component: 2000 - total flux cleaned = 0.000407133 Jy ! Total flux subtracted in 2048 components = 0.000407088 Jy ! Clean residual min=-0.003229 max=0.003102 Jy/beam ! Clean residual mean=0.000058 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.205374 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 160 components and 0.205374 Jy ![Exited script file: muppet] wmap "J2158-3013_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.025 x 7.765 at 4.296 degrees (North through East) ! Clean map min=-0.0061372 max=0.17523 Jy/beam ! Writing clean map to FITS file: J2158-3013_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.175234 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000843086 device "J2158-3013_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J2158-3013_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.44336 1.44336 2.88673 5.77345 11.5469 23.0938 46.1876 92.3752 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.175 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.025 x 7.765 at 4.296 degrees (North through East) ! Clean map min=-0.0061372 max=0.17523 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2158-3013_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J2158-3013_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2158-3013_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:55:30 2005