! Started logfile: J2141-3729_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:54:18 2005 obs J2141-3729_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J2141-3729_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.716667 visibilities/baseline/integration-bin. ! Found source: J2141-3729 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1628 lines of history. ! ! Reading 516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2141-3729_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.23786 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.790478Jy sigma=11.420515 ! Fit after self-cal, rms=0.790227Jy sigma=11.416556 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=7.045 mas, bpa=0.9804 degrees ! Estimated noise=2.96917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.183016 Jy ! Component: 100 - total flux cleaned = 0.222123 Jy ! Total flux subtracted in 100 components = 0.222123 Jy ! Clean residual min=-0.013274 max=0.021787 Jy/beam ! Clean residual mean=0.000145 rms=0.004881 Jy/beam ! Combined flux in latest and established models = 0.222123 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.222123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095350Jy sigma=1.248402 ! Fit after self-cal, rms=0.095376Jy sigma=1.248038 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=8.403 mas, bpa=-1.903 degrees ! Estimated noise=2.33985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275865 Jy ! Component: 100 - total flux cleaned = 0.0369976 Jy ! Component: 150 - total flux cleaned = 0.039175 Jy ! Component: 200 - total flux cleaned = 0.0395634 Jy ! Total flux subtracted in 200 components = 0.0395634 Jy ! Clean residual min=-0.012292 max=0.018507 Jy/beam ! Clean residual mean=0.000045 rms=0.004574 Jy/beam ! Combined flux in latest and established models = 0.261687 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 36 components and 0.261687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092630Jy sigma=1.163645 ! Fit after self-cal, rms=0.092572Jy sigma=1.163105 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0007 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.88 HN 1.00* KP 0.89 ! LA 1.00* MK 0.93 NL 1.17 OV 1.00* ! PT 0.97 SC 1.17 ! ! ! Fit before self-cal, rms=0.092572Jy sigma=1.163105 ! Fit after self-cal, rms=0.092823Jy sigma=1.150735 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092823Jy sigma=1.150735 ! Fit after self-cal, rms=0.092889Jy sigma=1.150660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=8.479 mas, bpa=-2.545 degrees ! Estimated noise=2.32483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169357 Jy ! Component: 100 - total flux cleaned = -0.00148336 Jy ! Component: 150 - total flux cleaned = -0.00128178 Jy ! Component: 200 - total flux cleaned = -0.00118299 Jy ! Total flux subtracted in 200 components = -0.00118299 Jy ! Clean residual min=-0.010911 max=0.017688 Jy/beam ! Clean residual mean=0.000153 rms=0.004245 Jy/beam ! Combined flux in latest and established models = 0.260504 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.260504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092449Jy sigma=1.147317 ! Fit after self-cal, rms=0.092431Jy sigma=1.147266 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092431Jy sigma=1.147266 ! Fit after self-cal, rms=0.089597Jy sigma=1.111791 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104951 Jy ! Component: 100 - total flux cleaned = 0.00123836 Jy ! Component: 150 - total flux cleaned = 0.00132912 Jy ! Component: 200 - total flux cleaned = 0.00141472 Jy ! Total flux subtracted in 200 components = 0.00141472 Jy ! Clean residual min=-0.010738 max=0.017408 Jy/beam ! Clean residual mean=0.000148 rms=0.004192 Jy/beam ! Combined flux in latest and established models = 0.261918 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.261918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089490Jy sigma=1.109655 ! Fit after self-cal, rms=0.088862Jy sigma=1.105778 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 8.479 at -2.545 degrees (North through East) ! Clean map min=-0.010613 max=0.19351 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088862Jy sigma=1.105778 ! Fit after self-cal, rms=0.088585Jy sigma=1.105569 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088585Jy sigma=1.105569 ! Fit after self-cal, rms=0.088425Jy sigma=1.104598 ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.48 mas, bpa=-2.661 degrees ! Estimated noise=2.3211 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011174 Jy ! Component: 100 - total flux cleaned = 5.80964e-05 Jy ! Component: 150 - total flux cleaned = 0.000149778 Jy ! Component: 200 - total flux cleaned = 0.000240591 Jy ! Total flux subtracted in 200 components = 0.000240591 Jy ! Clean residual min=-0.010674 max=0.016953 Jy/beam ! Clean residual mean=0.000149 rms=0.004151 Jy/beam ! Combined flux in latest and established models = 0.262159 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.262159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088257Jy sigma=1.102744 ! Fit after self-cal, rms=0.088208Jy sigma=1.102373 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088208Jy sigma=1.102373 ! Fit after self-cal, rms=0.088170Jy sigma=1.103168 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088170Jy sigma=1.103168 ! Fit after self-cal, rms=0.088156Jy sigma=1.103022 ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.44 mas, bpa=-2.46 degrees ! Estimated noise=2.31821 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581361 Jy ! Component: 100 - total flux cleaned = 0.000744186 Jy ! Component: 150 - total flux cleaned = 0.000824833 Jy ! Component: 200 - total flux cleaned = 0.000910891 Jy ! Total flux subtracted in 200 components = 0.000910891 Jy ! Clean residual min=-0.010687 max=0.016554 Jy/beam ! Clean residual mean=0.000135 rms=0.004098 Jy/beam ! Combined flux in latest and established models = 0.26307 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.26307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088054Jy sigma=1.101326 ! Fit after self-cal, rms=0.088061Jy sigma=1.101246 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.466 mas, bmaj=30.81 mas, bpa=3.508 degrees ! Estimated noise=2.94433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483636 Jy ! Component: 100 - total flux cleaned = 0.00486594 Jy ! Component: 150 - total flux cleaned = 0.00489558 Jy ! Component: 200 - total flux cleaned = 0.0049236 Jy ! Total flux subtracted in 200 components = 0.0049236 Jy ! Clean residual min=-0.011175 max=0.020754 Jy/beam ! Clean residual mean=0.000259 rms=0.005880 Jy/beam ! Combined flux in latest and established models = 0.267993 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.267993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088192Jy sigma=1.102505 ! Fit after self-cal, rms=0.088198Jy sigma=1.101316 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=7.041 mas, bpa=0.7376 degrees ! Estimated noise=2.95389 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.18318 Jy ! Component: 100 - total flux cleaned = 0.223423 Jy ! Component: 150 - total flux cleaned = 0.241479 Jy ! Component: 200 - total flux cleaned = 0.249842 Jy ! Total flux subtracted in 200 components = 0.249842 Jy ! Clean residual min=-0.011918 max=0.016941 Jy/beam ! Clean residual mean=0.000123 rms=0.004019 Jy/beam ! Combined flux in latest and established models = 0.249842 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.249842 Jy ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.44 mas, bpa=-2.46 degrees ! Estimated noise=2.31821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00893302 Jy ! Component: 100 - total flux cleaned = 0.0109111 Jy ! Component: 150 - total flux cleaned = 0.01122 Jy ! Component: 200 - total flux cleaned = 0.011414 Jy ! Total flux subtracted in 200 components = 0.011414 Jy ! Clean residual min=-0.010775 max=0.017259 Jy/beam ! Clean residual mean=0.000139 rms=0.004195 Jy/beam ! Combined flux in latest and established models = 0.261256 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 0.261256 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.466 mas, bmaj=30.81 mas, bpa=3.508 degrees ! Estimated noise=2.94433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532889 Jy ! Component: 100 - total flux cleaned = 0.00535458 Jy ! Component: 150 - total flux cleaned = 0.00538314 Jy ! Component: 200 - total flux cleaned = 0.00549615 Jy ! Total flux subtracted in 200 components = 0.00549615 Jy ! Clean residual min=-0.011292 max=0.021329 Jy/beam ! Clean residual mean=0.000266 rms=0.005993 Jy/beam ! Combined flux in latest and established models = 0.266752 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.266752 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.44 mas, bpa=-2.46 degrees ! Estimated noise=2.31821 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00310467 Jy ! Component: 100 - total flux cleaned = -0.00335386 Jy ! Component: 150 - total flux cleaned = -0.00358076 Jy ! Component: 200 - total flux cleaned = -0.00376949 Jy ! Total flux subtracted in 200 components = -0.00376949 Jy ! Clean residual min=-0.010668 max=0.016683 Jy/beam ! Clean residual mean=0.000137 rms=0.004108 Jy/beam ! Combined flux in latest and established models = 0.262983 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.262983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088204Jy sigma=1.103640 ! Fit after self-cal, rms=0.088201Jy sigma=1.103507 wmodel J2141-3729_S_2004_04_30_yyk\_map.mod ! Writing 58 model components to file: J2141-3729_S_2004_04_30_yyk_map.mod wobs J2141-3729_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J2141-3729_S_2004_04_30_yyk_uvs.fits wwins J2141-3729_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J2141-3729_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685254 Jy ! Component: 100 - total flux cleaned = 0.0123284 Jy ! Component: 150 - total flux cleaned = 0.0165858 Jy ! Component: 200 - total flux cleaned = 0.0191952 Jy ! Component: 250 - total flux cleaned = 0.0219307 Jy ! Component: 300 - total flux cleaned = 0.0246572 Jy ! Component: 350 - total flux cleaned = 0.0260928 Jy ! Component: 400 - total flux cleaned = 0.0265092 Jy ! Component: 450 - total flux cleaned = 0.0270412 Jy ! Component: 500 - total flux cleaned = 0.0276688 Jy ! Component: 550 - total flux cleaned = 0.0285084 Jy ! Component: 600 - total flux cleaned = 0.0289694 Jy ! Component: 650 - total flux cleaned = 0.0295249 Jy ! Component: 700 - total flux cleaned = 0.0298481 Jy ! Component: 750 - total flux cleaned = 0.0301538 Jy ! Component: 800 - total flux cleaned = 0.0299573 Jy ! Component: 850 - total flux cleaned = 0.0299586 Jy ! Component: 900 - total flux cleaned = 0.0297767 Jy ! Component: 950 - total flux cleaned = 0.0296896 Jy ! Component: 1000 - total flux cleaned = 0.0298609 Jy ! Component: 1050 - total flux cleaned = 0.0299447 Jy ! Component: 1100 - total flux cleaned = 0.0300277 Jy ! Component: 1150 - total flux cleaned = 0.0301862 Jy ! Component: 1200 - total flux cleaned = 0.0302635 Jy ! Component: 1250 - total flux cleaned = 0.0303376 Jy ! Component: 1300 - total flux cleaned = 0.0304084 Jy ! Component: 1350 - total flux cleaned = 0.0302651 Jy ! Component: 1400 - total flux cleaned = 0.0300568 Jy ! Component: 1450 - total flux cleaned = 0.0298537 Jy ! Component: 1500 - total flux cleaned = 0.0295226 Jy ! Component: 1550 - total flux cleaned = 0.0293271 Jy ! Component: 1600 - total flux cleaned = 0.0288825 Jy ! Component: 1650 - total flux cleaned = 0.0284476 Jy ! Component: 1700 - total flux cleaned = 0.0282027 Jy ! Component: 1750 - total flux cleaned = 0.0278414 Jy ! Component: 1800 - total flux cleaned = 0.0277231 Jy ! Component: 1850 - total flux cleaned = 0.0274897 Jy ! Component: 1900 - total flux cleaned = 0.0273747 Jy ! Component: 1950 - total flux cleaned = 0.027092 Jy ! Component: 2000 - total flux cleaned = 0.026925 Jy ! Total flux subtracted in 2048 components = 0.0266503 Jy ! Clean residual min=-0.003548 max=0.003058 Jy/beam ! Clean residual mean=-0.000062 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.289633 Jy keep ! Adding 155 model components to the UV plane model. ! The established model now contains 212 components and 0.289633 Jy ![Exited script file: muppet] wmap "J2141-3729_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.069 x 8.44 at -2.46 degrees (North through East) ! Clean map min=-0.0076666 max=0.18945 Jy/beam ! Writing clean map to FITS file: J2141-3729_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.189447 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00118027 device "J2141-3729_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2141-3729_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.86903 1.86903 3.73806 7.47613 14.9523 29.9045 59.809 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.189 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.069 x 8.44 at -2.46 degrees (North through East) ! Clean map min=-0.0076666 max=0.18945 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2141-3729_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2141-3729_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2141-3729_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:54:22 2005