! Started logfile: J2121-3703_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:53:01 2005 obs J2121-3703_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J2121-3703_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.755556 visibilities/baseline/integration-bin. ! Found source: J2121-3703 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1628 lines of history. ! ! Reading 544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2121-3703_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.313468 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.714489Jy sigma=9.725779 ! Fit after self-cal, rms=0.714196Jy sigma=9.721648 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=6.68 mas, bpa=-0.6001 degrees ! Estimated noise=3.47194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.239441 Jy ! Component: 100 - total flux cleaned = 0.288577 Jy ! Total flux subtracted in 100 components = 0.288577 Jy ! Clean residual min=-0.014284 max=0.017345 Jy/beam ! Clean residual mean=-0.000222 rms=0.004675 Jy/beam ! Combined flux in latest and established models = 0.288577 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.288577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104102Jy sigma=1.224010 ! Fit after self-cal, rms=0.103992Jy sigma=1.220658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=8.308 mas, bpa=-3.978 degrees ! Estimated noise=2.37918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.030949 Jy ! Component: 100 - total flux cleaned = 0.0413841 Jy ! Component: 150 - total flux cleaned = 0.0451331 Jy ! Component: 200 - total flux cleaned = 0.0456603 Jy ! Total flux subtracted in 200 components = 0.0456603 Jy ! Clean residual min=-0.013529 max=0.012968 Jy/beam ! Clean residual mean=-0.000558 rms=0.003894 Jy/beam ! Combined flux in latest and established models = 0.334237 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 46 components and 0.334237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098144Jy sigma=1.126474 ! Fit after self-cal, rms=0.098103Jy sigma=1.126312 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984017 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.95 HN 1.00* KP 0.96 ! LA 1.18 MK 1.05 NL 1.15 OV 1.00 ! PT 0.92 SC 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02668 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.89 HN 1.00* KP 0.86 ! LA 0.83 MK 0.91 NL 1.18 OV 0.88 ! PT 0.94 SC 1.11 ! ! ! Fit before self-cal, rms=0.098103Jy sigma=1.126312 ! Fit after self-cal, rms=0.092567Jy sigma=1.047163 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092567Jy sigma=1.047163 ! Fit after self-cal, rms=0.092538Jy sigma=1.046814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=8.509 mas, bpa=-4.98 degrees ! Estimated noise=2.34004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00601914 Jy ! Component: 100 - total flux cleaned = -0.00742448 Jy ! Component: 150 - total flux cleaned = -0.00754474 Jy ! Component: 200 - total flux cleaned = -0.00757814 Jy ! Total flux subtracted in 200 components = -0.00757814 Jy ! Clean residual min=-0.010408 max=0.008665 Jy/beam ! Clean residual mean=-0.000341 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 0.326659 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.326659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092321Jy sigma=1.042666 ! Fit after self-cal, rms=0.092258Jy sigma=1.042567 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092258Jy sigma=1.042567 ! Fit after self-cal, rms=0.087992Jy sigma=0.996878 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587898 Jy ! Component: 100 - total flux cleaned = 0.000628559 Jy ! Component: 150 - total flux cleaned = 0.000699775 Jy ! Component: 200 - total flux cleaned = 0.000699734 Jy ! Total flux subtracted in 200 components = 0.000699734 Jy ! Clean residual min=-0.010371 max=0.008144 Jy/beam ! Clean residual mean=-0.000339 rms=0.002644 Jy/beam ! Combined flux in latest and established models = 0.327359 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.327359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087975Jy sigma=0.996420 ! Fit after self-cal, rms=0.087359Jy sigma=0.992087 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.125 x 8.509 at -4.98 degrees (North through East) ! Clean map min=-0.0099924 max=0.28089 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087359Jy sigma=0.992087 ! Fit after self-cal, rms=0.085227Jy sigma=0.983503 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085227Jy sigma=0.983503 ! Fit after self-cal, rms=0.085127Jy sigma=0.982698 ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.594 mas, bpa=-5.359 degrees ! Estimated noise=2.3096 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00428113 Jy ! Component: 100 - total flux cleaned = -0.00556893 Jy ! Component: 150 - total flux cleaned = -0.00562037 Jy ! Component: 200 - total flux cleaned = -0.00564326 Jy ! Total flux subtracted in 200 components = -0.00564326 Jy ! Clean residual min=-0.010424 max=0.008809 Jy/beam ! Clean residual mean=-0.000293 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 0.321716 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.321716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084986Jy sigma=0.980497 ! Fit after self-cal, rms=0.084952Jy sigma=0.980286 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084952Jy sigma=0.980286 ! Fit after self-cal, rms=0.085922Jy sigma=0.980950 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085922Jy sigma=0.980950 ! Fit after self-cal, rms=0.085932Jy sigma=0.980877 ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.607 mas, bpa=-5.169 degrees ! Estimated noise=2.31518 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.31522e-05 Jy ! Component: 100 - total flux cleaned = -1.67935e-05 Jy ! Component: 150 - total flux cleaned = 5.23939e-05 Jy ! Component: 200 - total flux cleaned = 7.04871e-05 Jy ! Total flux subtracted in 200 components = 7.04871e-05 Jy ! Clean residual min=-0.009993 max=0.008149 Jy/beam ! Clean residual mean=-0.000307 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 0.321786 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.321786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085948Jy sigma=0.980668 ! Fit after self-cal, rms=0.085932Jy sigma=0.980640 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.598 mas, bmaj=31.98 mas, bpa=1.227 degrees ! Estimated noise=2.93094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114682 Jy ! Component: 100 - total flux cleaned = 0.00120219 Jy ! Component: 150 - total flux cleaned = 0.00125354 Jy ! Component: 200 - total flux cleaned = 0.00126478 Jy ! Total flux subtracted in 200 components = 0.00126478 Jy ! Clean residual min=-0.009538 max=0.009073 Jy/beam ! Clean residual mean=-0.000539 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 0.323051 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 79 components and 0.323051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085917Jy sigma=0.980892 ! Fit after self-cal, rms=0.085888Jy sigma=0.980799 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.542 mas, bmaj=6.744 mas, bpa=-1.239 degrees ! Estimated noise=3.45081 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.238403 Jy ! Component: 100 - total flux cleaned = 0.283754 Jy ! Component: 150 - total flux cleaned = 0.30301 Jy ! Component: 200 - total flux cleaned = 0.311988 Jy ! Total flux subtracted in 200 components = 0.311988 Jy ! Clean residual min=-0.011080 max=0.010408 Jy/beam ! Clean residual mean=-0.000130 rms=0.003017 Jy/beam ! Combined flux in latest and established models = 0.311988 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.311988 Jy ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.607 mas, bpa=-5.169 degrees ! Estimated noise=2.31518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860391 Jy ! Component: 100 - total flux cleaned = 0.00902454 Jy ! Component: 150 - total flux cleaned = 0.00925022 Jy ! Component: 200 - total flux cleaned = 0.00943865 Jy ! Total flux subtracted in 200 components = 0.00943865 Jy ! Clean residual min=-0.010194 max=0.008470 Jy/beam ! Clean residual mean=-0.000308 rms=0.002624 Jy/beam ! Combined flux in latest and established models = 0.321426 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.321426 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.598 mas, bmaj=31.98 mas, bpa=1.227 degrees ! Estimated noise=2.93094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018608 Jy ! Component: 100 - total flux cleaned = 0.0017826 Jy ! Component: 150 - total flux cleaned = 0.00177848 Jy ! Component: 200 - total flux cleaned = 0.00171181 Jy ! Total flux subtracted in 200 components = 0.00171181 Jy ! Clean residual min=-0.009704 max=0.009168 Jy/beam ! Clean residual mean=-0.000540 rms=0.002997 Jy/beam ! Combined flux in latest and established models = 0.323138 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 40 components and 0.323138 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.607 mas, bpa=-5.169 degrees ! Estimated noise=2.31518 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00085709 Jy ! Component: 100 - total flux cleaned = -0.000862134 Jy ! Component: 150 - total flux cleaned = -0.000865023 Jy ! Component: 200 - total flux cleaned = -0.000926744 Jy ! Total flux subtracted in 200 components = -0.000926744 Jy ! Clean residual min=-0.010246 max=0.008476 Jy/beam ! Clean residual mean=-0.000308 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 0.322211 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.322211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085812Jy sigma=0.982716 ! Fit after self-cal, rms=0.085808Jy sigma=0.982621 wmodel J2121-3703_S_2004_04_30_yyk\_map.mod ! Writing 47 model components to file: J2121-3703_S_2004_04_30_yyk_map.mod wobs J2121-3703_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J2121-3703_S_2004_04_30_yyk_uvs.fits wwins J2121-3703_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J2121-3703_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184498 Jy ! Component: 100 - total flux cleaned = -0.00284005 Jy ! Component: 150 - total flux cleaned = -0.00385487 Jy ! Component: 200 - total flux cleaned = -0.00444919 Jy ! Component: 250 - total flux cleaned = -0.00501019 Jy ! Component: 300 - total flux cleaned = -0.00543582 Jy ! Component: 350 - total flux cleaned = -0.00582629 Jy ! Component: 400 - total flux cleaned = -0.00629275 Jy ! Component: 450 - total flux cleaned = -0.00691428 Jy ! Component: 500 - total flux cleaned = -0.00768003 Jy ! Component: 550 - total flux cleaned = -0.00825383 Jy ! Component: 600 - total flux cleaned = -0.00880926 Jy ! Component: 650 - total flux cleaned = -0.00942212 Jy ! Component: 700 - total flux cleaned = -0.0101597 Jy ! Component: 750 - total flux cleaned = -0.0106597 Jy ! Component: 800 - total flux cleaned = -0.0111453 Jy ! Component: 850 - total flux cleaned = -0.0115484 Jy ! Component: 900 - total flux cleaned = -0.0121355 Jy ! Component: 950 - total flux cleaned = -0.0125791 Jy ! Component: 1000 - total flux cleaned = -0.0127636 Jy ! Component: 1050 - total flux cleaned = -0.0130042 Jy ! Component: 1100 - total flux cleaned = -0.0131215 Jy ! Component: 1150 - total flux cleaned = -0.0133523 Jy ! Component: 1200 - total flux cleaned = -0.0134656 Jy ! Component: 1250 - total flux cleaned = -0.0139625 Jy ! Component: 1300 - total flux cleaned = -0.0141249 Jy ! Component: 1350 - total flux cleaned = -0.0142319 Jy ! Component: 1400 - total flux cleaned = -0.014441 Jy ! Component: 1450 - total flux cleaned = -0.014594 Jy ! Component: 1500 - total flux cleaned = -0.0147959 Jy ! Component: 1550 - total flux cleaned = -0.015044 Jy ! Component: 1600 - total flux cleaned = -0.0153841 Jy ! Component: 1650 - total flux cleaned = -0.0154794 Jy ! Component: 1700 - total flux cleaned = -0.0157618 Jy ! Component: 1750 - total flux cleaned = -0.0159004 Jy ! Component: 1800 - total flux cleaned = -0.0161285 Jy ! Component: 1850 - total flux cleaned = -0.0163532 Jy ! Component: 1900 - total flux cleaned = -0.0166624 Jy ! Component: 1950 - total flux cleaned = -0.0168367 Jy ! Component: 2000 - total flux cleaned = -0.0170946 Jy ! Total flux subtracted in 2048 components = -0.0172221 Jy ! Clean residual min=-0.002201 max=0.002571 Jy/beam ! Clean residual mean=-0.000146 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.304989 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 164 components and 0.304989 Jy ![Exited script file: muppet] wmap "J2121-3703_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 8.607 at -5.169 degrees (North through East) ! Clean map min=-0.0063825 max=0.27643 Jy/beam ! Writing clean map to FITS file: J2121-3703_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.276427 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000877254 device "J2121-3703_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J2121-3703_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.952065 0.952065 1.90413 3.80826 7.61652 15.233 30.4661 60.9321 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 8.607 at -5.169 degrees (North through East) ! Clean map min=-0.0063825 max=0.27643 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2121-3703_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J2121-3703_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2121-3703_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:53:05 2005