! Started logfile: J2110-0126_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:52:02 2005 obs J2110-0126_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2110-0126_S_2004_05_27_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.933333 visibilities/baseline/integration-bin. ! Found source: J2110-0126 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 2688 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2110-0126_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.130781 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.896811Jy sigma=16.997413 ! Fit after self-cal, rms=0.896000Jy sigma=16.994673 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=6.777 mas, bpa=-1.896 degrees ! Estimated noise=1.06223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0919278 Jy ! Component: 100 - total flux cleaned = 0.109202 Jy ! Total flux subtracted in 100 components = 0.109202 Jy ! Clean residual min=-0.004706 max=0.005184 Jy/beam ! Clean residual mean=0.000061 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.109202 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.109202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073882Jy sigma=1.058775 ! Fit after self-cal, rms=0.073881Jy sigma=1.058380 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=8.218 mas, bpa=-5.849 degrees ! Estimated noise=0.746646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688871 Jy ! Component: 100 - total flux cleaned = 0.00956678 Jy ! Component: 150 - total flux cleaned = 0.0103147 Jy ! Component: 200 - total flux cleaned = 0.0103475 Jy ! Total flux subtracted in 200 components = 0.0103475 Jy ! Clean residual min=-0.002934 max=0.003249 Jy/beam ! Clean residual mean=0.000053 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.119549 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 41 components and 0.119549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073298Jy sigma=1.047946 ! Fit after self-cal, rms=0.073281Jy sigma=1.047866 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.98929 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.93 HN 1.01 KP 1.01 ! LA 1.00* MK 1.03 NL 1.08 OV 1.03 ! PT 1.05 SC 0.84 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.073281Jy sigma=1.047866 ! Fit after self-cal, rms=0.072649Jy sigma=1.043767 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072649Jy sigma=1.043767 ! Fit after self-cal, rms=0.072649Jy sigma=1.043765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=8.116 mas, bpa=-4.909 degrees ! Estimated noise=0.747651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103848 Jy ! Component: 100 - total flux cleaned = 0.00114335 Jy ! Component: 150 - total flux cleaned = 0.00114475 Jy ! Component: 200 - total flux cleaned = 0.00112676 Jy ! Total flux subtracted in 200 components = 0.00112676 Jy ! Clean residual min=-0.002699 max=0.002964 Jy/beam ! Clean residual mean=0.000047 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.120676 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.120676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072574Jy sigma=1.043181 ! Fit after self-cal, rms=0.072569Jy sigma=1.043163 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072569Jy sigma=1.043163 ! Fit after self-cal, rms=0.068855Jy sigma=0.984389 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101037 Jy ! Component: 100 - total flux cleaned = 0.000892501 Jy ! Component: 150 - total flux cleaned = 0.000829684 Jy ! Component: 200 - total flux cleaned = 0.000755305 Jy ! Total flux subtracted in 200 components = 0.000755305 Jy ! Clean residual min=-0.002672 max=0.002963 Jy/beam ! Clean residual mean=0.000049 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.121431 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.121431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068837Jy sigma=0.983453 ! Fit after self-cal, rms=0.068549Jy sigma=0.980266 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 8.116 at -4.909 degrees (North through East) ! Clean map min=-0.0026566 max=0.10971 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068549Jy sigma=0.980266 ! Fit after self-cal, rms=0.067296Jy sigma=0.971027 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067296Jy sigma=0.971027 ! Fit after self-cal, rms=0.067264Jy sigma=0.970660 ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=8.104 mas, bpa=-4.607 degrees ! Estimated noise=0.740175 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000750987 Jy ! Component: 100 - total flux cleaned = -0.00100956 Jy ! Component: 150 - total flux cleaned = -0.00104365 Jy ! Component: 200 - total flux cleaned = -0.00106498 Jy ! Total flux subtracted in 200 components = -0.00106498 Jy ! Clean residual min=-0.002637 max=0.002549 Jy/beam ! Clean residual mean=0.000036 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.120366 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.120366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067268Jy sigma=0.970493 ! Fit after self-cal, rms=0.067258Jy sigma=0.970447 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067258Jy sigma=0.970447 ! Fit after self-cal, rms=0.067779Jy sigma=0.972558 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067779Jy sigma=0.972558 ! Fit after self-cal, rms=0.067775Jy sigma=0.972447 ! Inverting map and beam ! Estimated beam: bmin=3.363 mas, bmaj=8.098 mas, bpa=-4.374 degrees ! Estimated noise=0.738779 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378551 Jy ! Component: 100 - total flux cleaned = -0.000449882 Jy ! Component: 150 - total flux cleaned = -0.000481764 Jy ! Component: 200 - total flux cleaned = -0.000501631 Jy ! Total flux subtracted in 200 components = -0.000501631 Jy ! Clean residual min=-0.002336 max=0.002508 Jy/beam ! Clean residual mean=0.000058 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.119865 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.119865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067771Jy sigma=0.972369 ! Fit after self-cal, rms=0.067768Jy sigma=0.972360 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.962 mas, bmaj=13.4 mas, bpa=7.902 degrees ! Estimated noise=0.915945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000226735 Jy ! Component: 100 - total flux cleaned = -0.000230898 Jy ! Component: 150 - total flux cleaned = -0.000268092 Jy ! Component: 200 - total flux cleaned = -0.000318311 Jy ! Total flux subtracted in 200 components = -0.000318311 Jy ! Clean residual min=-0.002225 max=0.002475 Jy/beam ! Clean residual mean=0.000119 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.119546 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.119546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067761Jy sigma=0.972413 ! Fit after self-cal, rms=0.067753Jy sigma=0.972372 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=6.757 mas, bpa=-1.239 degrees ! Estimated noise=1.0454 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0925744 Jy ! Component: 100 - total flux cleaned = 0.110248 Jy ! Component: 150 - total flux cleaned = 0.116661 Jy ! Component: 200 - total flux cleaned = 0.119645 Jy ! Total flux subtracted in 200 components = 0.119645 Jy ! Clean residual min=-0.003345 max=0.003892 Jy/beam ! Clean residual mean=0.000035 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.119645 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.119645 Jy ! Inverting map and beam ! Estimated beam: bmin=3.363 mas, bmaj=8.098 mas, bpa=-4.374 degrees ! Estimated noise=0.738779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378263 Jy ! Component: 100 - total flux cleaned = 0.000334254 Jy ! Component: 150 - total flux cleaned = 0.000333111 Jy ! Component: 200 - total flux cleaned = 0.00030979 Jy ! Total flux subtracted in 200 components = 0.00030979 Jy ! Clean residual min=-0.002354 max=0.002521 Jy/beam ! Clean residual mean=0.000057 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.119955 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.119955 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.962 mas, bmaj=13.4 mas, bpa=7.902 degrees ! Estimated noise=0.915945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162271 Jy ! Component: 100 - total flux cleaned = -0.000214715 Jy ! Component: 150 - total flux cleaned = -0.000258192 Jy ! Component: 200 - total flux cleaned = -0.000317315 Jy ! Total flux subtracted in 200 components = -0.000317315 Jy ! Clean residual min=-0.002206 max=0.002483 Jy/beam ! Clean residual mean=0.000118 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.119637 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.119637 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.363 mas, bmaj=8.098 mas, bpa=-4.374 degrees ! Estimated noise=0.738779 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011745 Jy ! Component: 100 - total flux cleaned = 6.95693e-05 Jy ! Component: 150 - total flux cleaned = 3.39806e-05 Jy ! Component: 200 - total flux cleaned = 3.39904e-05 Jy ! Total flux subtracted in 200 components = 3.39904e-05 Jy ! Clean residual min=-0.002355 max=0.002496 Jy/beam ! Clean residual mean=0.000059 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.119671 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.119671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067755Jy sigma=0.972498 ! Fit after self-cal, rms=0.067756Jy sigma=0.972491 wmodel J2110-0126_S_2004_05_27_yyk\_map.mod ! Writing 60 model components to file: J2110-0126_S_2004_05_27_yyk_map.mod wobs J2110-0126_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2110-0126_S_2004_05_27_yyk_uvs.fits wwins J2110-0126_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J2110-0126_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011214 Jy ! Component: 100 - total flux cleaned = -4.29476e-05 Jy ! Component: 150 - total flux cleaned = -0.000229412 Jy ! Component: 200 - total flux cleaned = -0.000194859 Jy ! Component: 250 - total flux cleaned = 1.04687e-05 Jy ! Component: 300 - total flux cleaned = 0.000307203 Jy ! Component: 350 - total flux cleaned = 0.000497841 Jy ! Component: 400 - total flux cleaned = 0.00065236 Jy ! Component: 450 - total flux cleaned = 0.000742875 Jy ! Component: 500 - total flux cleaned = 0.000831626 Jy ! Component: 550 - total flux cleaned = 0.000888871 Jy ! Component: 600 - total flux cleaned = 0.000944444 Jy ! Component: 650 - total flux cleaned = 0.00105388 Jy ! Component: 700 - total flux cleaned = 0.00121433 Jy ! Component: 750 - total flux cleaned = 0.00134544 Jy ! Component: 800 - total flux cleaned = 0.00142255 Jy ! Component: 850 - total flux cleaned = 0.00149903 Jy ! Component: 900 - total flux cleaned = 0.0016478 Jy ! Component: 950 - total flux cleaned = 0.0017202 Jy ! Component: 1000 - total flux cleaned = 0.00172036 Jy ! Component: 1050 - total flux cleaned = 0.00188542 Jy ! Component: 1100 - total flux cleaned = 0.00183867 Jy ! Component: 1150 - total flux cleaned = 0.00193019 Jy ! Component: 1200 - total flux cleaned = 0.00197467 Jy ! Component: 1250 - total flux cleaned = 0.00193004 Jy ! Component: 1300 - total flux cleaned = 0.00197384 Jy ! Component: 1350 - total flux cleaned = 0.00201685 Jy ! Component: 1400 - total flux cleaned = 0.00199583 Jy ! Component: 1450 - total flux cleaned = 0.00195425 Jy ! Component: 1500 - total flux cleaned = 0.00189264 Jy ! Component: 1550 - total flux cleaned = 0.00185232 Jy ! Component: 1600 - total flux cleaned = 0.00187235 Jy ! Component: 1650 - total flux cleaned = 0.0018525 Jy ! Component: 1700 - total flux cleaned = 0.00185267 Jy ! Component: 1750 - total flux cleaned = 0.00181449 Jy ! Component: 1800 - total flux cleaned = 0.00191031 Jy ! Component: 1850 - total flux cleaned = 0.00196689 Jy ! Component: 1900 - total flux cleaned = 0.00202267 Jy ! Component: 1950 - total flux cleaned = 0.00204098 Jy ! Component: 2000 - total flux cleaned = 0.00211383 Jy ! Total flux subtracted in 2048 components = 0.00218582 Jy ! Clean residual min=-0.001276 max=0.001039 Jy/beam ! Clean residual mean=0.000022 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.121857 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 200 components and 0.121857 Jy ![Exited script file: muppet] wmap "J2110-0126_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.363 x 8.098 at -4.374 degrees (North through East) ! Clean map min=-0.0018636 max=0.109 Jy/beam ! Writing clean map to FITS file: J2110-0126_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108996 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000381931 device "J2110-0126_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2110-0126_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05122 1.05122 2.10244 4.20488 8.40975 16.8195 33.639 67.278 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.363 x 8.098 at -4.374 degrees (North through East) ! Clean map min=-0.0018636 max=0.109 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2110-0126_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2110-0126_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2110-0126_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:52:06 2005