! Started logfile: J2109-4110_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:51:45 2005 obs J2109-4110_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2109-4110_S_2004_05_27_yyk_uve.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.572222 visibilities/baseline/integration-bin. ! Found source: J2109-4110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1392 lines of history. ! ! Reading 1236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2109-4110_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.16597 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.333970Jy sigma=5.004849 ! Fit after self-cal, rms=0.333747Jy sigma=4.992790 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.156 mas, bmaj=6.594 mas, bpa=-4.405 degrees ! Estimated noise=2.54558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.914672 Jy ! Component: 100 - total flux cleaned = 1.146 Jy ! Total flux subtracted in 100 components = 1.146 Jy ! Clean residual min=-0.059530 max=0.111329 Jy/beam ! Clean residual mean=0.000900 rms=0.025142 Jy/beam ! Combined flux in latest and established models = 1.146 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239632Jy sigma=3.558489 ! Fit after self-cal, rms=0.239062Jy sigma=3.545991 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.889 mas, bpa=-4.392 degrees ! Estimated noise=1.70238 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.161018 Jy ! Component: 100 - total flux cleaned = 0.21738 Jy ! Component: 150 - total flux cleaned = 0.237136 Jy ! Component: 200 - total flux cleaned = 0.242356 Jy ! Total flux subtracted in 200 components = 0.242356 Jy ! Clean residual min=-0.045329 max=0.099648 Jy/beam ! Clean residual mean=-0.001244 rms=0.020343 Jy/beam ! Combined flux in latest and established models = 1.38836 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 1.38836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168342Jy sigma=2.406137 ! Fit after self-cal, rms=0.167669Jy sigma=2.402521 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.993194 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.95 ! LA 1.04 MK 0.97 NL 1.00* OV 1.10 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99259 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.99 ! LA 1.00 MK 1.04 NL 1.00* OV 1.11 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00492 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 0.97 ! LA 0.93 MK 0.98 NL 1.00* OV 1.14 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01107 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.90 ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 0.89 SC 1.11 ! ! ! Fit before self-cal, rms=0.167669Jy sigma=2.402521 ! Fit after self-cal, rms=0.137324Jy sigma=1.867918 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137324Jy sigma=1.867918 ! Fit after self-cal, rms=0.137563Jy sigma=1.866924 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=7.882 mas, bpa=-4.548 degrees ! Estimated noise=1.68998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, 7.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0777581 Jy ! Component: 100 - total flux cleaned = 0.0839407 Jy ! Component: 150 - total flux cleaned = 0.0866198 Jy ! Component: 200 - total flux cleaned = 0.087037 Jy ! Total flux subtracted in 200 components = 0.087037 Jy ! Clean residual min=-0.024947 max=0.023279 Jy/beam ! Clean residual mean=0.000005 rms=0.006804 Jy/beam ! Combined flux in latest and established models = 1.47539 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 1.47539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097426Jy sigma=1.300402 ! Fit after self-cal, rms=0.095461Jy sigma=1.275308 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095461Jy sigma=1.275308 ! Fit after self-cal, rms=0.091742Jy sigma=1.220952 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00656291 Jy ! Component: 100 - total flux cleaned = 0.00786653 Jy ! Component: 150 - total flux cleaned = 0.00866681 Jy ! Component: 200 - total flux cleaned = 0.00867488 Jy ! Total flux subtracted in 200 components = 0.00867488 Jy ! Clean residual min=-0.024204 max=0.020367 Jy/beam ! Clean residual mean=-0.000025 rms=0.006203 Jy/beam ! Combined flux in latest and established models = 1.48407 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 1.48407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089431Jy sigma=1.193602 ! Fit after self-cal, rms=0.088792Jy sigma=1.187711 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.834 x 7.882 at -4.548 degrees (North through East) ! Clean map min=-0.025478 max=1.133 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088792Jy sigma=1.187711 ! Fit after self-cal, rms=0.082132Jy sigma=1.098085 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082132Jy sigma=1.098085 ! Fit after self-cal, rms=0.082133Jy sigma=1.097800 ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.859 mas, bpa=-4.401 degrees ! Estimated noise=1.68306 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156543 Jy ! Component: 100 - total flux cleaned = 0.0187481 Jy ! Component: 150 - total flux cleaned = 0.0183215 Jy ! Component: 200 - total flux cleaned = 0.0179166 Jy ! Total flux subtracted in 200 components = 0.0179166 Jy ! Clean residual min=-0.018279 max=0.015870 Jy/beam ! Clean residual mean=0.000116 rms=0.004760 Jy/beam ! Combined flux in latest and established models = 1.50198 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 1.50198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079495Jy sigma=1.060668 ! Fit after self-cal, rms=0.079007Jy sigma=1.054764 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079007Jy sigma=1.054764 ! Fit after self-cal, rms=0.075545Jy sigma=1.011497 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075545Jy sigma=1.011497 ! Fit after self-cal, rms=0.075547Jy sigma=1.011486 ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.856 mas, bpa=-4.381 degrees ! Estimated noise=1.68337 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00963695 Jy ! Component: 100 - total flux cleaned = 0.010125 Jy ! Component: 150 - total flux cleaned = 0.00992992 Jy ! Component: 200 - total flux cleaned = 0.00957357 Jy ! Total flux subtracted in 200 components = 0.00957357 Jy ! Clean residual min=-0.016419 max=0.013654 Jy/beam ! Clean residual mean=0.000093 rms=0.004297 Jy/beam ! Combined flux in latest and established models = 1.51156 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 1.51156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074202Jy sigma=0.991090 ! Fit after self-cal, rms=0.073877Jy sigma=0.987674 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.93 mas, bmaj=33.04 mas, bpa=-1.343 degrees ! Estimated noise=2.28352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184156 Jy ! Component: 100 - total flux cleaned = 0.00142653 Jy ! Component: 150 - total flux cleaned = 0.00094277 Jy ! Component: 200 - total flux cleaned = 0.000737021 Jy ! Total flux subtracted in 200 components = 0.000737021 Jy ! Clean residual min=-0.019393 max=0.015019 Jy/beam ! Clean residual mean=0.000156 rms=0.006491 Jy/beam ! Combined flux in latest and established models = 1.51229 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 93 components and 1.51229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073599Jy sigma=0.983132 ! Fit after self-cal, rms=0.073431Jy sigma=0.981699 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.156 mas, bmaj=6.594 mas, bpa=-4.489 degrees ! Estimated noise=2.50978 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.902913 Jy ! Component: 100 - total flux cleaned = 1.13703 Jy ! Component: 150 - total flux cleaned = 1.26374 Jy ! Component: 200 - total flux cleaned = 1.33961 Jy ! Total flux subtracted in 200 components = 1.33961 Jy ! Clean residual min=-0.020404 max=0.032480 Jy/beam ! Clean residual mean=0.000545 rms=0.009462 Jy/beam ! Combined flux in latest and established models = 1.33961 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 1.33961 Jy ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.856 mas, bpa=-4.381 degrees ! Estimated noise=1.68337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0720136 Jy ! Component: 100 - total flux cleaned = 0.110653 Jy ! Component: 150 - total flux cleaned = 0.134738 Jy ! Component: 200 - total flux cleaned = 0.150002 Jy ! Total flux subtracted in 200 components = 0.150002 Jy ! Clean residual min=-0.015863 max=0.011221 Jy/beam ! Clean residual mean=0.000131 rms=0.004505 Jy/beam ! Combined flux in latest and established models = 1.48961 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 93 components and 1.48961 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.93 mas, bmaj=33.04 mas, bpa=-1.343 degrees ! Estimated noise=2.28352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.014759 Jy ! Component: 100 - total flux cleaned = 0.020035 Jy ! Component: 150 - total flux cleaned = 0.0209967 Jy ! Component: 200 - total flux cleaned = 0.0216557 Jy ! Total flux subtracted in 200 components = 0.0216557 Jy ! Clean residual min=-0.020274 max=0.014804 Jy/beam ! Clean residual mean=0.000147 rms=0.006549 Jy/beam ! Combined flux in latest and established models = 1.51127 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 106 components and 1.51127 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.856 mas, bpa=-4.381 degrees ! Estimated noise=1.68337 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633484 Jy ! Component: 100 - total flux cleaned = 0.00161547 Jy ! Component: 150 - total flux cleaned = 0.00226075 Jy ! Component: 200 - total flux cleaned = 0.00282076 Jy ! Total flux subtracted in 200 components = 0.00282076 Jy ! Clean residual min=-0.014968 max=0.012470 Jy/beam ! Clean residual mean=0.000079 rms=0.004025 Jy/beam ! Combined flux in latest and established models = 1.51409 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 115 components and 1.51409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072443Jy sigma=0.961562 ! Fit after self-cal, rms=0.072200Jy sigma=0.958924 wmodel J2109-4110_S_2004_05_27_yyk\_map.mod ! Writing 115 model components to file: J2109-4110_S_2004_05_27_yyk_map.mod wobs J2109-4110_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2109-4110_S_2004_05_27_yyk_uvs.fits wwins J2109-4110_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J2109-4110_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0045459 Jy ! Component: 100 - total flux cleaned = -0.00551406 Jy ! Component: 150 - total flux cleaned = -0.00664411 Jy ! Component: 200 - total flux cleaned = -0.00848391 Jy ! Component: 250 - total flux cleaned = -0.00950106 Jy ! Component: 300 - total flux cleaned = -0.00950573 Jy ! Component: 350 - total flux cleaned = -0.00939482 Jy ! Component: 400 - total flux cleaned = -0.00929071 Jy ! Component: 450 - total flux cleaned = -0.00919229 Jy ! Component: 500 - total flux cleaned = -0.00900903 Jy ! Component: 550 - total flux cleaned = -0.00892202 Jy ! Component: 600 - total flux cleaned = -0.0088409 Jy ! Component: 650 - total flux cleaned = -0.00867963 Jy ! Component: 700 - total flux cleaned = -0.00860199 Jy ! Component: 750 - total flux cleaned = -0.00852827 Jy ! Component: 800 - total flux cleaned = -0.00823738 Jy ! Component: 850 - total flux cleaned = -0.00781361 Jy ! Component: 900 - total flux cleaned = -0.00747023 Jy ! Component: 950 - total flux cleaned = -0.00713624 Jy ! Component: 1000 - total flux cleaned = -0.00700607 Jy ! Component: 1050 - total flux cleaned = -0.00674772 Jy ! Component: 1100 - total flux cleaned = -0.00655658 Jy ! Component: 1150 - total flux cleaned = -0.00617748 Jy ! Component: 1200 - total flux cleaned = -0.00580224 Jy ! Component: 1250 - total flux cleaned = -0.00555413 Jy ! Component: 1300 - total flux cleaned = -0.00518515 Jy ! Component: 1350 - total flux cleaned = -0.00482013 Jy ! Component: 1400 - total flux cleaned = -0.00451659 Jy ! Component: 1450 - total flux cleaned = -0.00427403 Jy ! Component: 1500 - total flux cleaned = -0.00396833 Jy ! Component: 1550 - total flux cleaned = -0.00372183 Jy ! Component: 1600 - total flux cleaned = -0.00365947 Jy ! Component: 1650 - total flux cleaned = -0.00359612 Jy ! Component: 1700 - total flux cleaned = -0.00359619 Jy ! Component: 1750 - total flux cleaned = -0.00353195 Jy ! Component: 1800 - total flux cleaned = -0.00346554 Jy ! Component: 1850 - total flux cleaned = -0.00353289 Jy ! Component: 1900 - total flux cleaned = -0.00339733 Jy ! Component: 1950 - total flux cleaned = -0.00339865 Jy ! Component: 2000 - total flux cleaned = -0.00332921 Jy ! Total flux subtracted in 2048 components = -0.0034 Jy ! Clean residual min=-0.004235 max=0.004366 Jy/beam ! Clean residual mean=0.000115 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 1.51069 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 246 components and 1.51069 Jy ![Exited script file: muppet] wmap "J2109-4110_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 7.856 at -4.381 degrees (North through East) ! Clean map min=-0.0078516 max=1.1206 Jy/beam ! Writing clean map to FITS file: J2109-4110_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.12064 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00137066 device "J2109-4110_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2109-4110_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.366931 0.366931 0.733862 1.46772 2.93545 5.8709 11.7418 23.4836 46.9672 93.9344 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 7.856 at -4.381 degrees (North through East) ! Clean map min=-0.0078516 max=1.1206 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2109-4110_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2109-4110_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2109-4110_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:51:49 2005