! Started logfile: J2108-2452_S_2004_05_27_yyk_uvs.log on Wed Dec 7 01:05:35 2005 obs J2108-2452_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2108-2452_S_2004_05_27_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.65 visibilities/baseline/integration-bin. ! Found source: J2108-2452 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1387 lines of history. ! ! Reading 936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2108-2452_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.136318 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898965Jy sigma=14.539702 ! Fit after self-cal, rms=0.889159Jy sigma=14.403410 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.93 mas, bmaj=22.09 mas, bpa=1.408 degrees ! Estimated noise=2.78993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0964981 Jy ! Component: 100 - total flux cleaned = 0.117837 Jy ! Total flux subtracted in 100 components = 0.117837 Jy ! Clean residual min=-0.009194 max=0.008242 Jy/beam ! Clean residual mean=0.000018 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 0.117837 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.117837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073291Jy sigma=1.050877 ! Fit after self-cal, rms=0.073214Jy sigma=1.049762 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.978 mas, bmaj=26.99 mas, bpa=-2.731 degrees ! Estimated noise=1.94289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107876 Jy ! Component: 100 - total flux cleaned = 0.0155372 Jy ! Component: 150 - total flux cleaned = 0.0173341 Jy ! Component: 200 - total flux cleaned = 0.0177941 Jy ! Total flux subtracted in 200 components = 0.0177941 Jy ! Clean residual min=-0.004489 max=0.005702 Jy/beam ! Clean residual mean=0.000019 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.135631 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.135631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072239Jy sigma=1.030254 ! Fit after self-cal, rms=0.072229Jy sigma=1.029999 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00777 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00* KP 0.95 ! LA 1.18 MK 1.00* NL 0.87 OV 0.85 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01779 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.00* KP 0.98 ! LA 1.01 MK 1.00* NL 0.86 OV 0.99 ! PT 0.91 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.996913 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.19 HN 1.00* KP 0.86 ! LA 1.00* MK 1.00* NL 1.00 OV 1.01 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.072229Jy sigma=1.029999 ! Fit after self-cal, rms=0.071198Jy sigma=1.013919 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071198Jy sigma=1.013919 ! Fit after self-cal, rms=0.071213Jy sigma=1.013833 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.638 mas, bmaj=27.49 mas, bpa=-4.005 degrees ! Estimated noise=1.91692 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239015 Jy ! Component: 100 - total flux cleaned = 0.00246452 Jy ! Component: 150 - total flux cleaned = 0.00240959 Jy ! Component: 200 - total flux cleaned = 0.00236325 Jy ! Total flux subtracted in 200 components = 0.00236325 Jy ! Clean residual min=-0.004861 max=0.005332 Jy/beam ! Clean residual mean=0.000077 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.137994 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 62 components and 0.137994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071165Jy sigma=1.011250 ! Fit after self-cal, rms=0.071157Jy sigma=1.011164 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071157Jy sigma=1.011164 ! Fit after self-cal, rms=0.065600Jy sigma=0.922568 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137584 Jy ! Component: 100 - total flux cleaned = 0.00109248 Jy ! Component: 150 - total flux cleaned = 0.000892094 Jy ! Component: 200 - total flux cleaned = 0.000689669 Jy ! Total flux subtracted in 200 components = 0.000689669 Jy ! Clean residual min=-0.005214 max=0.006194 Jy/beam ! Clean residual mean=0.000093 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.138684 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.138684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065492Jy sigma=0.920866 ! Fit after self-cal, rms=0.065213Jy sigma=0.914879 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.638 x 27.49 at -4.005 degrees (North through East) ! Clean map min=-0.0050616 max=0.11392 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065213Jy sigma=0.914879 ! Fit after self-cal, rms=0.065012Jy sigma=0.907485 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065012Jy sigma=0.907485 ! Fit after self-cal, rms=0.065026Jy sigma=0.906926 ! Inverting map and beam ! Estimated beam: bmin=8.55 mas, bmaj=27.76 mas, bpa=-4.227 degrees ! Estimated noise=1.89992 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000618999 Jy ! Component: 100 - total flux cleaned = -0.000909845 Jy ! Component: 150 - total flux cleaned = -0.00111582 Jy ! Component: 200 - total flux cleaned = -0.001293 Jy ! Total flux subtracted in 200 components = -0.001293 Jy ! Clean residual min=-0.005217 max=0.005691 Jy/beam ! Clean residual mean=0.000056 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.137391 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 0.137391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064965Jy sigma=0.905996 ! Fit after self-cal, rms=0.064975Jy sigma=0.905868 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064975Jy sigma=0.905868 ! Fit after self-cal, rms=0.065113Jy sigma=0.894905 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065113Jy sigma=0.894905 ! Fit after self-cal, rms=0.065118Jy sigma=0.894864 ! Inverting map and beam ! Estimated beam: bmin=8.537 mas, bmaj=27.94 mas, bpa=-4.304 degrees ! Estimated noise=1.9005 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.35885e-05 Jy ! Component: 100 - total flux cleaned = -0.000171274 Jy ! Component: 150 - total flux cleaned = -0.000309916 Jy ! Component: 200 - total flux cleaned = -0.000433179 Jy ! Total flux subtracted in 200 components = -0.000433179 Jy ! Clean residual min=-0.005262 max=0.005537 Jy/beam ! Clean residual mean=0.000062 rms=0.001567 Jy/beam ! Combined flux in latest and established models = 0.136958 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 0.136958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065069Jy sigma=0.894271 ! Fit after self-cal, rms=0.065076Jy sigma=0.894221 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.841 mas, bmaj=28.65 mas, bpa=-3.059 degrees ! Estimated noise=1.9433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.46719e-05 Jy ! Component: 100 - total flux cleaned = -7.4782e-05 Jy ! Component: 150 - total flux cleaned = -0.000131028 Jy ! Component: 200 - total flux cleaned = -0.000201477 Jy ! Total flux subtracted in 200 components = -0.000201477 Jy ! Clean residual min=-0.005185 max=0.005430 Jy/beam ! Clean residual mean=0.000073 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.136756 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.136756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065043Jy sigma=0.894014 ! Fit after self-cal, rms=0.065041Jy sigma=0.893981 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.764 mas, bmaj=22.41 mas, bpa=0.3041 degrees ! Estimated noise=2.76963 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0997363 Jy ! Component: 100 - total flux cleaned = 0.123167 Jy ! Component: 150 - total flux cleaned = 0.133689 Jy ! Component: 200 - total flux cleaned = 0.136687 Jy ! Total flux subtracted in 200 components = 0.136687 Jy ! Clean residual min=-0.007160 max=0.008371 Jy/beam ! Clean residual mean=0.000082 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 0.136687 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.136687 Jy ! Inverting map and beam ! Estimated beam: bmin=8.537 mas, bmaj=27.94 mas, bpa=-4.304 degrees ! Estimated noise=1.9005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000925663 Jy ! Component: 100 - total flux cleaned = -0.000695562 Jy ! Component: 150 - total flux cleaned = -0.000531352 Jy ! Component: 200 - total flux cleaned = -0.000402325 Jy ! Total flux subtracted in 200 components = -0.000402325 Jy ! Clean residual min=-0.005090 max=0.005403 Jy/beam ! Clean residual mean=0.000063 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.136285 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.136285 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.841 mas, bmaj=28.65 mas, bpa=-3.059 degrees ! Estimated noise=1.9433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411116 Jy ! Component: 100 - total flux cleaned = 0.00044717 Jy ! Component: 150 - total flux cleaned = 0.000421773 Jy ! Component: 200 - total flux cleaned = 0.000371737 Jy ! Total flux subtracted in 200 components = 0.000371737 Jy ! Clean residual min=-0.005119 max=0.005394 Jy/beam ! Clean residual mean=0.000073 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 0.136656 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.136656 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.537 mas, bmaj=27.94 mas, bpa=-4.304 degrees ! Estimated noise=1.9005 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297931 Jy ! Component: 100 - total flux cleaned = -0.000331488 Jy ! Component: 150 - total flux cleaned = -0.000362645 Jy ! Component: 200 - total flux cleaned = -0.000362706 Jy ! Total flux subtracted in 200 components = -0.000362706 Jy ! Clean residual min=-0.005188 max=0.005561 Jy/beam ! Clean residual mean=0.000064 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.136294 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.136294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065005Jy sigma=0.894004 ! Fit after self-cal, rms=0.065009Jy sigma=0.893946 wmodel J2108-2452_S_2004_05_27_yyk\_map.mod ! Writing 86 model components to file: J2108-2452_S_2004_05_27_yyk_map.mod wobs J2108-2452_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2108-2452_S_2004_05_27_yyk_uvs.fits wwins J2108-2452_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J2108-2452_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000250495 Jy ! Component: 100 - total flux cleaned = 0.000836321 Jy ! Component: 150 - total flux cleaned = 0.00142833 Jy ! Component: 200 - total flux cleaned = 0.00173382 Jy ! Component: 250 - total flux cleaned = 0.00179191 Jy ! Component: 300 - total flux cleaned = 0.00152021 Jy ! Component: 350 - total flux cleaned = 0.00131063 Jy ! Component: 400 - total flux cleaned = 0.00100791 Jy ! Component: 450 - total flux cleaned = 0.000861876 Jy ! Component: 500 - total flux cleaned = 0.000909325 Jy ! Component: 550 - total flux cleaned = 0.000909067 Jy ! Component: 600 - total flux cleaned = 0.000863625 Jy ! Component: 650 - total flux cleaned = 0.00095094 Jy ! Component: 700 - total flux cleaned = 0.000992247 Jy ! Component: 750 - total flux cleaned = 0.00103265 Jy ! Component: 800 - total flux cleaned = 0.00103277 Jy ! Component: 850 - total flux cleaned = 0.00115122 Jy ! Component: 900 - total flux cleaned = 0.0012274 Jy ! Component: 950 - total flux cleaned = 0.00130239 Jy ! Component: 1000 - total flux cleaned = 0.00133913 Jy ! Total flux subtracted in 1024 components = 0.00148375 Jy ! Clean residual min=-0.002101 max=0.002258 Jy/beam ! Clean residual mean=0.000059 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.137777 Jy keep ! Adding 76 model components to the UV plane model. ! The established model now contains 162 components and 0.137777 Jy ![Exited script file: muppet] wmap "J2108-2452_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.537 x 27.94 at -4.304 degrees (North through East) ! Clean map min=-0.0050952 max=0.1137 Jy/beam ! Writing clean map to FITS file: J2108-2452_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113704 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000934283 device "J2108-2452_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2108-2452_S_2004_05_27_yyk_map.eps/VPS' loglevs 1*100*3*image_rms/peak_flux ! The new contour levels are: ! -2.46504 2.46504 4.93008 9.86017 19.7203 39.4407 78.8814 print "clev=",int(1*3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.537 x 27.94 at -4.304 degrees (North through East) ! Clean map min=-0.0050952 max=0.1137 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2108-2452_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2108-2452_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2108-2452_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 01:05:36 2005