! Started logfile: J2102-3313_S_2004_05_08_yyk_uvs.log on Wed Dec 7 01:05:28 2005 obs J2102-3313_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J2102-3313_S_2004_05_08_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877778 visibilities/baseline/integration-bin. ! Found source: J2102-3313 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 1264 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2102-3313_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.335243 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.700790Jy sigma=10.257842 ! Fit after self-cal, rms=0.700704Jy sigma=10.256453 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.454 mas, bmaj=6.97 mas, bpa=-5.425 degrees ! Estimated noise=2.21964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.257297 Jy ! Component: 100 - total flux cleaned = 0.326153 Jy ! Total flux subtracted in 100 components = 0.326153 Jy ! Clean residual min=-0.016694 max=0.025043 Jy/beam ! Clean residual mean=-0.000108 rms=0.005128 Jy/beam ! Combined flux in latest and established models = 0.326153 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.326153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107434Jy sigma=1.454487 ! Fit after self-cal, rms=0.107284Jy sigma=1.453127 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.62 mas, bpa=-5.18 degrees ! Estimated noise=1.36561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448549 Jy ! Component: 100 - total flux cleaned = 0.0616654 Jy ! Component: 150 - total flux cleaned = 0.0679363 Jy ! Component: 200 - total flux cleaned = 0.0686041 Jy ! Total flux subtracted in 200 components = 0.0686041 Jy ! Clean residual min=-0.012029 max=0.015286 Jy/beam ! Clean residual mean=-0.000176 rms=0.003691 Jy/beam ! Combined flux in latest and established models = 0.394757 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.394757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097230Jy sigma=1.240813 ! Fit after self-cal, rms=0.097236Jy sigma=1.240696 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.097236Jy sigma=1.240696 ! Fit after self-cal, rms=0.097236Jy sigma=1.240696 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097236Jy sigma=1.240696 ! Fit after self-cal, rms=0.097236Jy sigma=1.240696 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.62 mas, bpa=-5.18 degrees ! Estimated noise=1.36561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670337 Jy ! Component: 100 - total flux cleaned = 0.000956068 Jy ! Component: 150 - total flux cleaned = 0.00122854 Jy ! Component: 200 - total flux cleaned = 0.00149111 Jy ! Total flux subtracted in 200 components = 0.00149111 Jy ! Clean residual min=-0.011688 max=0.014993 Jy/beam ! Clean residual mean=-0.000175 rms=0.003629 Jy/beam ! Combined flux in latest and established models = 0.396248 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.396248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096732Jy sigma=1.236145 ! Fit after self-cal, rms=0.096740Jy sigma=1.236117 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096740Jy sigma=1.236117 ! Fit after self-cal, rms=0.094171Jy sigma=1.204657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711354 Jy ! Component: 100 - total flux cleaned = 0.000950375 Jy ! Component: 150 - total flux cleaned = 0.00117576 Jy ! Component: 200 - total flux cleaned = 0.00128161 Jy ! Total flux subtracted in 200 components = 0.00128161 Jy ! Clean residual min=-0.011397 max=0.014597 Jy/beam ! Clean residual mean=-0.000175 rms=0.003580 Jy/beam ! Combined flux in latest and established models = 0.39753 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.39753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093840Jy sigma=1.201406 ! Fit after self-cal, rms=0.094004Jy sigma=1.198994 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 8.62 at -5.18 degrees (North through East) ! Clean map min=-0.011072 max=0.29572 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094004Jy sigma=1.198994 ! Fit after self-cal, rms=0.094004Jy sigma=1.198994 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094004Jy sigma=1.198994 ! Fit after self-cal, rms=0.094191Jy sigma=1.198690 ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.62 mas, bpa=-5.18 degrees ! Estimated noise=1.36561 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234167 Jy ! Component: 100 - total flux cleaned = 0.000339902 Jy ! Component: 150 - total flux cleaned = 0.000551467 Jy ! Component: 200 - total flux cleaned = 0.00074922 Jy ! Total flux subtracted in 200 components = 0.00074922 Jy ! Clean residual min=-0.011295 max=0.014405 Jy/beam ! Clean residual mean=-0.000174 rms=0.003553 Jy/beam ! Combined flux in latest and established models = 0.398279 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.398279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093928Jy sigma=1.196140 ! Fit after self-cal, rms=0.094042Jy sigma=1.196074 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094042Jy sigma=1.196074 ! Fit after self-cal, rms=0.092703Jy sigma=1.149895 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092703Jy sigma=1.149895 ! Fit after self-cal, rms=0.092787Jy sigma=1.149779 ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=8.442 mas, bpa=-4.808 degrees ! Estimated noise=1.35978 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234245 Jy ! Component: 100 - total flux cleaned = 0.00277076 Jy ! Component: 150 - total flux cleaned = 0.00300928 Jy ! Component: 200 - total flux cleaned = 0.00314228 Jy ! Total flux subtracted in 200 components = 0.00314228 Jy ! Clean residual min=-0.008226 max=0.010574 Jy/beam ! Clean residual mean=-0.000043 rms=0.002567 Jy/beam ! Combined flux in latest and established models = 0.401421 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.401421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092451Jy sigma=1.146608 ! Fit after self-cal, rms=0.092500Jy sigma=1.146566 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.504 mas, bmaj=25.1 mas, bpa=1.414 degrees ! Estimated noise=1.74033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332941 Jy ! Component: 100 - total flux cleaned = 0.00351465 Jy ! Component: 150 - total flux cleaned = 0.00368604 Jy ! Component: 200 - total flux cleaned = 0.00384755 Jy ! Total flux subtracted in 200 components = 0.00384755 Jy ! Clean residual min=-0.008048 max=0.009703 Jy/beam ! Clean residual mean=-0.000057 rms=0.003576 Jy/beam ! Combined flux in latest and established models = 0.405269 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 45 components and 0.405269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092377Jy sigma=1.146801 ! Fit after self-cal, rms=0.092388Jy sigma=1.146717 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.439 mas, bmaj=6.906 mas, bpa=-5.22 degrees ! Estimated noise=2.21412 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.258159 Jy ! Component: 100 - total flux cleaned = 0.328945 Jy ! Component: 150 - total flux cleaned = 0.359944 Jy ! Component: 200 - total flux cleaned = 0.375919 Jy ! Total flux subtracted in 200 components = 0.375919 Jy ! Clean residual min=-0.012733 max=0.014352 Jy/beam ! Clean residual mean=-0.000022 rms=0.003654 Jy/beam ! Combined flux in latest and established models = 0.375919 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.375919 Jy ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=8.442 mas, bpa=-4.808 degrees ! Estimated noise=1.35978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183363 Jy ! Component: 100 - total flux cleaned = 0.0256574 Jy ! Component: 150 - total flux cleaned = 0.0269669 Jy ! Component: 200 - total flux cleaned = 0.0278502 Jy ! Total flux subtracted in 200 components = 0.0278502 Jy ! Clean residual min=-0.007957 max=0.010089 Jy/beam ! Clean residual mean=-0.000047 rms=0.002457 Jy/beam ! Combined flux in latest and established models = 0.403769 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 58 components and 0.403769 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.504 mas, bmaj=25.1 mas, bpa=1.414 degrees ! Estimated noise=1.74033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045343 Jy ! Component: 100 - total flux cleaned = 0.00501419 Jy ! Component: 150 - total flux cleaned = 0.00534938 Jy ! Component: 200 - total flux cleaned = 0.00576856 Jy ! Total flux subtracted in 200 components = 0.00576856 Jy ! Clean residual min=-0.008064 max=0.010015 Jy/beam ! Clean residual mean=-0.000072 rms=0.003310 Jy/beam ! Combined flux in latest and established models = 0.409537 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.409537 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=8.442 mas, bpa=-4.808 degrees ! Estimated noise=1.35978 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210053 Jy ! Component: 100 - total flux cleaned = -0.00223443 Jy ! Component: 150 - total flux cleaned = -0.00235497 Jy ! Component: 200 - total flux cleaned = -0.00235616 Jy ! Total flux subtracted in 200 components = -0.00235616 Jy ! Clean residual min=-0.007278 max=0.008778 Jy/beam ! Clean residual mean=-0.000046 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.407181 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.407181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091697Jy sigma=1.132582 ! Fit after self-cal, rms=0.091658Jy sigma=1.130740 wmodel J2102-3313_S_2004_05_08_yyk\_map.mod ! Writing 76 model components to file: J2102-3313_S_2004_05_08_yyk_map.mod wobs J2102-3313_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J2102-3313_S_2004_05_08_yyk_uvs.fits wwins J2102-3313_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J2102-3313_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018969 Jy ! Component: 100 - total flux cleaned = 0.0023834 Jy ! Component: 150 - total flux cleaned = 0.00228498 Jy ! Component: 200 - total flux cleaned = 0.00147037 Jy ! Component: 250 - total flux cleaned = 0.000703596 Jy ! Component: 300 - total flux cleaned = -2.3758e-05 Jy ! Component: 350 - total flux cleaned = -0.000712021 Jy ! Component: 400 - total flux cleaned = -0.00128632 Jy ! Component: 450 - total flux cleaned = -0.00168143 Jy ! Component: 500 - total flux cleaned = -0.0019838 Jy ! Component: 550 - total flux cleaned = -0.00242228 Jy ! Component: 600 - total flux cleaned = -0.00256257 Jy ! Component: 650 - total flux cleaned = -0.00283303 Jy ! Component: 700 - total flux cleaned = -0.00296294 Jy ! Component: 750 - total flux cleaned = -0.00302697 Jy ! Component: 800 - total flux cleaned = -0.00327308 Jy ! Component: 850 - total flux cleaned = -0.00339434 Jy ! Component: 900 - total flux cleaned = -0.0036825 Jy ! Component: 950 - total flux cleaned = -0.00368298 Jy ! Component: 1000 - total flux cleaned = -0.00390071 Jy ! Component: 1050 - total flux cleaned = -0.00384668 Jy ! Component: 1100 - total flux cleaned = -0.00379436 Jy ! Component: 1150 - total flux cleaned = -0.00374337 Jy ! Component: 1200 - total flux cleaned = -0.00374319 Jy ! Component: 1250 - total flux cleaned = -0.00364554 Jy ! Component: 1300 - total flux cleaned = -0.00355027 Jy ! Component: 1350 - total flux cleaned = -0.00355079 Jy ! Component: 1400 - total flux cleaned = -0.00355056 Jy ! Component: 1450 - total flux cleaned = -0.00346053 Jy ! Component: 1500 - total flux cleaned = -0.00341648 Jy ! Component: 1550 - total flux cleaned = -0.00332943 Jy ! Component: 1600 - total flux cleaned = -0.00332961 Jy ! Component: 1650 - total flux cleaned = -0.00328711 Jy ! Component: 1700 - total flux cleaned = -0.00328649 Jy ! Component: 1750 - total flux cleaned = -0.00316442 Jy ! Component: 1800 - total flux cleaned = -0.00304465 Jy ! Component: 1850 - total flux cleaned = -0.00308419 Jy ! Component: 1900 - total flux cleaned = -0.00300612 Jy ! Component: 1950 - total flux cleaned = -0.00289094 Jy ! Component: 2000 - total flux cleaned = -0.00281561 Jy ! Total flux subtracted in 2048 components = -0.00281539 Jy ! Clean residual min=-0.002007 max=0.002176 Jy/beam ! Clean residual mean=-0.000041 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.404366 Jy keep ! Adding 167 model components to the UV plane model. ! The established model now contains 243 components and 0.404366 Jy ![Exited script file: muppet] wmap "J2102-3313_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 8.442 at -4.808 degrees (North through East) ! Clean map min=-0.0082403 max=0.29784 Jy/beam ! Writing clean map to FITS file: J2102-3313_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.297842 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00077763 device "J2102-3313_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J2102-3313_S_2004_05_08_yyk_map.eps/VPS' loglevs 4*100*3*image_rms/peak_flux ! The new contour levels are: ! -3.13306 3.13306 6.26612 12.5322 25.0645 50.1289 print "clev=",int(4*3*image_rms*10000)/10000 ! clev= 0.0093 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.097 x 8.442 at -4.808 degrees (North through East) ! Clean map min=-0.0082403 max=0.29784 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2102-3313_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J2102-3313_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2102-3313_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 01:05:32 2005