! Started logfile: J2055-1234_S_2004_05_27_yyk_uvs.log on Wed Dec  7 00:50:30 2005
obs J2055-1234_S_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J2055-1234_S_2004_05_27_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.754074 visibilities/baseline/integration-bin.
! Found source: J2055-1234
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1388 lines of history.
! 
! Reading 2036 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J2055-1234_S_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.101103 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.934125Jy  sigma=17.136605
! Fit after  self-cal, rms=0.933068Jy  sigma=17.121473
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.29 mas, bmaj=9.264 mas, bpa=-12.54 degrees
! Estimated noise=1.89722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0589423 Jy
! Component: 100  -  total flux cleaned = 0.0715215 Jy
! Total flux subtracted in 100 components = 0.0715215 Jy
! Clean residual min=-0.007214 max=0.012449 Jy/beam
! Clean residual mean=0.000249 rms=0.002474 Jy/beam
! Combined flux in latest and established models = 0.0715215 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0715215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072500Jy  sigma=1.117907
! Fit after  self-cal, rms=0.072431Jy  sigma=1.116460
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.162 mas, bmaj=13.09 mas, bpa=-10.53 degrees
! Estimated noise=1.01005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00715109 Jy
! Component: 100  -  total flux cleaned = 0.00728767 Jy
! Component: 150  -  total flux cleaned = 0.00711044 Jy
! Component: 200  -  total flux cleaned = 0.00695999 Jy
! Total flux subtracted in 200 components = 0.00695999 Jy
! Clean residual min=-0.005680 max=0.015120 Jy/beam
! Clean residual mean=0.000307 rms=0.002739 Jy/beam
! Combined flux in latest and established models = 0.0784814 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.0784815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072016Jy  sigma=1.104921
! Fit after  self-cal, rms=0.071976Jy  sigma=1.104292
! Inverting map 
! Added new window around map position (19.5, 2.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151624 Jy
! Component: 100  -  total flux cleaned = 0.0205074 Jy
! Component: 150  -  total flux cleaned = 0.0236563 Jy
! Component: 200  -  total flux cleaned = 0.0249321 Jy
! Total flux subtracted in 200 components = 0.0249321 Jy
! Clean residual min=-0.003839 max=0.004262 Jy/beam
! Clean residual mean=0.000087 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.103414 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 56 model components to the UV plane model.
! The established model now contains 78 components and 0.103414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069871Jy  sigma=1.055927
! Fit after  self-cal, rms=0.069631Jy  sigma=1.050687
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.988359
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.12     HN        1.00*    KP        0.91     
!   LA        1.00*    MK        1.00*    NL        1.14     OV        1.01     
!   PT        0.87     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.069631Jy  sigma=1.050687
! Fit after  self-cal, rms=0.070173Jy  sigma=1.048804
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070173Jy  sigma=1.048804
! Fit after  self-cal, rms=0.070177Jy  sigma=1.048524
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.191 mas, bmaj=13.15 mas, bpa=-10.58 degrees
! Estimated noise=1.00711 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301228 Jy
! Component: 100  -  total flux cleaned = 0.00360829 Jy
! Component: 150  -  total flux cleaned = 0.00392657 Jy
! Component: 200  -  total flux cleaned = 0.00426576 Jy
! Total flux subtracted in 200 components = 0.00426576 Jy
! Clean residual min=-0.003209 max=0.003700 Jy/beam
! Clean residual mean=0.000049 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.107679 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 102 components and 0.107679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070040Jy  sigma=1.045726
! Fit after  self-cal, rms=0.070016Jy  sigma=1.045253
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070016Jy  sigma=1.045253
! Fit after  self-cal, rms=0.065432Jy  sigma=0.968489
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334473 Jy
! Component: 100  -  total flux cleaned = 0.00364718 Jy
! Component: 150  -  total flux cleaned = 0.00383361 Jy
! Component: 200  -  total flux cleaned = 0.00377829 Jy
! Total flux subtracted in 200 components = 0.00377829 Jy
! Clean residual min=-0.003535 max=0.003760 Jy/beam
! Clean residual mean=0.000018 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.111458 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 0.111458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065278Jy  sigma=0.964953
! Fit after  self-cal, rms=0.064956Jy  sigma=0.959357
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.191 x 13.15 at -10.58 degrees (North through East)
! Clean map  min=-0.0037213  max=0.074899 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.654 mas, bmaj=17.13 mas, bpa=3.122 degrees
! Estimated noise=1.09746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00070278 Jy
! Component: 100  -  total flux cleaned = 0.000599346 Jy
! Component: 150  -  total flux cleaned = 0.00051087 Jy
! Component: 200  -  total flux cleaned = 0.000472281 Jy
! Total flux subtracted in 200 components = 0.000472281 Jy
! Clean residual min=-0.003842 max=0.003215 Jy/beam
! Clean residual mean=0.000015 rms=0.001065 Jy/beam
! Combined flux in latest and established models = 0.11193 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 143 components and 0.11193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064942Jy  sigma=0.958825
! Fit after  self-cal, rms=0.064874Jy  sigma=0.957799
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.289 mas, bmaj=9.277 mas, bpa=-12.59 degrees
! Estimated noise=1.9018 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0640887 Jy
! Component: 100  -  total flux cleaned = 0.0829169 Jy
! Component: 150  -  total flux cleaned = 0.094241 Jy
! Component: 200  -  total flux cleaned = 0.101575 Jy
! Total flux subtracted in 200 components = 0.101575 Jy
! Clean residual min=-0.005854 max=0.007516 Jy/beam
! Clean residual mean=0.000069 rms=0.001743 Jy/beam
! Combined flux in latest and established models = 0.101575 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.101575 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.191 mas, bmaj=13.15 mas, bpa=-10.58 degrees
! Estimated noise=1.00711 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0065371 Jy
! Component: 100  -  total flux cleaned = 0.00852706 Jy
! Component: 150  -  total flux cleaned = 0.00899137 Jy
! Component: 200  -  total flux cleaned = 0.0093663 Jy
! Total flux subtracted in 200 components = 0.0093663 Jy
! Clean residual min=-0.003710 max=0.004123 Jy/beam
! Clean residual mean=0.000019 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 0.110941 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 71 components and 0.110941 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.654 mas, bmaj=17.13 mas, bpa=3.122 degrees
! Estimated noise=1.09746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000910506 Jy
! Component: 100  -  total flux cleaned = 0.00083997 Jy
! Component: 150  -  total flux cleaned = 0.000713232 Jy
! Component: 200  -  total flux cleaned = 0.000656116 Jy
! Total flux subtracted in 200 components = 0.000656116 Jy
! Clean residual min=-0.003856 max=0.003134 Jy/beam
! Clean residual mean=0.000018 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.111597 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 96 components and 0.111597 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.191 mas, bmaj=13.15 mas, bpa=-10.58 degrees
! Estimated noise=1.00711 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 4.99447e-05 Jy
! Component: 100  -  total flux cleaned = -8.10312e-05 Jy
! Component: 150  -  total flux cleaned = -0.000317462 Jy
! Component: 200  -  total flux cleaned = -0.000524402 Jy
! Total flux subtracted in 200 components = -0.000524402 Jy
! Clean residual min=-0.003478 max=0.003640 Jy/beam
! Clean residual mean=0.000016 rms=0.001015 Jy/beam
! Combined flux in latest and established models = 0.111073 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 106 components and 0.111073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064846Jy  sigma=0.957274
! Fit after  self-cal, rms=0.064754Jy  sigma=0.956723
wmodel J2055-1234_S_2004_05_27_yyk\_map.mod
! Writing 106 model components to file: J2055-1234_S_2004_05_27_yyk_map.mod
wobs J2055-1234_S_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J2055-1234_S_2004_05_27_yyk_uvs.fits
wwins J2055-1234_S_2004_05_27_yyk\_map.win
! wwins: Wrote 2 windows to J2055-1234_S_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000634136 Jy
! Component: 100  -  total flux cleaned = 0.000765478 Jy
! Component: 150  -  total flux cleaned = 0.000825473 Jy
! Component: 200  -  total flux cleaned = 0.000878453 Jy
! Component: 250  -  total flux cleaned = 0.000977731 Jy
! Component: 300  -  total flux cleaned = 0.00097763 Jy
! Component: 350  -  total flux cleaned = 0.000933593 Jy
! Component: 400  -  total flux cleaned = 0.000849709 Jy
! Component: 450  -  total flux cleaned = 0.000889369 Jy
! Component: 500  -  total flux cleaned = 0.000771819 Jy
! Component: 550  -  total flux cleaned = 0.000696862 Jy
! Component: 600  -  total flux cleaned = 0.000842068 Jy
! Component: 650  -  total flux cleaned = 0.000912475 Jy
! Component: 700  -  total flux cleaned = 0.00104947 Jy
! Component: 750  -  total flux cleaned = 0.00114891 Jy
! Component: 800  -  total flux cleaned = 0.00121374 Jy
! Component: 850  -  total flux cleaned = 0.0012776 Jy
! Component: 900  -  total flux cleaned = 0.00133956 Jy
! Component: 950  -  total flux cleaned = 0.00130863 Jy
! Component: 1000  -  total flux cleaned = 0.00142851 Jy
! Component: 1050  -  total flux cleaned = 0.00148771 Jy
! Component: 1100  -  total flux cleaned = 0.00157513 Jy
! Component: 1150  -  total flux cleaned = 0.00160347 Jy
! Component: 1200  -  total flux cleaned = 0.00160392 Jy
! Component: 1250  -  total flux cleaned = 0.00165905 Jy
! Component: 1300  -  total flux cleaned = 0.00174028 Jy
! Component: 1350  -  total flux cleaned = 0.00171343 Jy
! Component: 1400  -  total flux cleaned = 0.00171381 Jy
! Component: 1450  -  total flux cleaned = 0.00184495 Jy
! Component: 1500  -  total flux cleaned = 0.00187081 Jy
! Component: 1550  -  total flux cleaned = 0.00194725 Jy
! Component: 1600  -  total flux cleaned = 0.0019221 Jy
! Component: 1650  -  total flux cleaned = 0.00202196 Jy
! Component: 1700  -  total flux cleaned = 0.00202191 Jy
! Component: 1750  -  total flux cleaned = 0.00204637 Jy
! Component: 1800  -  total flux cleaned = 0.00211871 Jy
! Component: 1850  -  total flux cleaned = 0.00209502 Jy
! Component: 1900  -  total flux cleaned = 0.00207143 Jy
! Component: 1950  -  total flux cleaned = 0.00216509 Jy
! Component: 2000  -  total flux cleaned = 0.00211907 Jy
! Total flux subtracted in 2048 components = 0.00216507 Jy
! Clean residual min=-0.001203 max=0.001263 Jy/beam
! Clean residual mean=0.000039 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.113238 Jy
keep
! Adding 114 model components to the UV plane model.
! The established model now contains 220 components and 0.113238 Jy
![Exited script file: muppet]
wmap "J2055-1234_S_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.191 x 13.15 at -10.58 degrees (North through East)
! Clean map  min=-0.0028322  max=0.075049 Jy/beam
! Writing clean map to FITS file: J2055-1234_S_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0750489 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000473602 
device "J2055-1234_S_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J2055-1234_S_2004_05_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.89318 1.89318 3.78635 7.5727 15.1454 30.2908 60.5816
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.075 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.191 x 13.15 at -10.58 degrees (North through East)
! Clean map  min=-0.0028322  max=0.075049 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2055-1234_S_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J2055-1234_S_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J2055-1234_S_2004_05_27_yyk_uvs.log closed on Wed Dec  7 00:50:34 2005