! Started logfile: J2054-2016_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:50:21 2005 obs J2054-2016_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2054-2016_S_2004_05_27_yyk_uve.fits ! AN table 1: 19 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877193 visibilities/baseline/integration-bin. ! Found source: J2054-2016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1383 lines of history. ! ! Reading 3000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2054-2016_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.220817 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.794200Jy sigma=14.085990 ! Fit after self-cal, rms=0.794168Jy sigma=14.085320 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=6.423 mas, bpa=-2.736 degrees ! Estimated noise=1.18544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.176938 Jy ! Component: 100 - total flux cleaned = 0.20317 Jy ! Total flux subtracted in 100 components = 0.20317 Jy ! Clean residual min=-0.005383 max=0.006726 Jy/beam ! Clean residual mean=-0.000047 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.20317 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.20317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071181Jy sigma=1.094185 ! Fit after self-cal, rms=0.071144Jy sigma=1.093541 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=8.288 mas, bpa=-2.731 degrees ! Estimated noise=0.787836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.010205 Jy ! Component: 100 - total flux cleaned = 0.0138816 Jy ! Component: 150 - total flux cleaned = 0.0153261 Jy ! Component: 200 - total flux cleaned = 0.0155044 Jy ! Total flux subtracted in 200 components = 0.0155044 Jy ! Clean residual min=-0.005006 max=0.004008 Jy/beam ! Clean residual mean=-0.000111 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.218674 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 0.218674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069997Jy sigma=1.074652 ! Fit after self-cal, rms=0.069974Jy sigma=1.074283 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01127 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.94 KP 0.94 ! LA 1.08 MK 0.97 NL 1.00 OV 0.98 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.991809 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.02 KP 1.00 ! LA 1.05 MK 1.04 NL 0.98 OV 1.02 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01931 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.98 KP 0.91 ! LA 1.00* MK 0.99 NL 1.02 OV 0.86 ! PT 0.95 SC 1.13 ! ! ! Fit before self-cal, rms=0.069974Jy sigma=1.074283 ! Fit after self-cal, rms=0.068580Jy sigma=1.052251 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068580Jy sigma=1.052251 ! Fit after self-cal, rms=0.068569Jy sigma=1.052063 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=8.326 mas, bpa=-2.71 degrees ! Estimated noise=0.786757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287688 Jy ! Component: 100 - total flux cleaned = 0.000319026 Jy ! Component: 150 - total flux cleaned = 0.000374954 Jy ! Component: 200 - total flux cleaned = 0.000426124 Jy ! Total flux subtracted in 200 components = 0.000426124 Jy ! Clean residual min=-0.003851 max=0.003727 Jy/beam ! Clean residual mean=-0.000049 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.2191 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.2191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068543Jy sigma=1.051621 ! Fit after self-cal, rms=0.068531Jy sigma=1.051404 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068531Jy sigma=1.051404 ! Fit after self-cal, rms=0.066769Jy sigma=1.018161 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000444877 Jy ! Component: 100 - total flux cleaned = 0.000522862 Jy ! Component: 150 - total flux cleaned = 0.000565995 Jy ! Component: 200 - total flux cleaned = 0.000605721 Jy ! Total flux subtracted in 200 components = 0.000605721 Jy ! Clean residual min=-0.003847 max=0.003734 Jy/beam ! Clean residual mean=-0.000046 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.219706 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.219706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066749Jy sigma=1.017870 ! Fit after self-cal, rms=0.066699Jy sigma=1.015970 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.171 x 8.326 at -2.71 degrees (North through East) ! Clean map min=-0.0037171 max=0.20519 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066699Jy sigma=1.015970 ! Fit after self-cal, rms=0.065857Jy sigma=1.007058 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065857Jy sigma=1.007058 ! Fit after self-cal, rms=0.065871Jy sigma=1.006856 ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.328 mas, bpa=-2.566 degrees ! Estimated noise=0.781001 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000940784 Jy ! Component: 100 - total flux cleaned = -0.000943008 Jy ! Component: 150 - total flux cleaned = -0.000897123 Jy ! Component: 200 - total flux cleaned = -0.000875154 Jy ! Total flux subtracted in 200 components = -0.000875154 Jy ! Clean residual min=-0.003782 max=0.003247 Jy/beam ! Clean residual mean=-0.000036 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.218831 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.218831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065870Jy sigma=1.006414 ! Fit after self-cal, rms=0.065877Jy sigma=1.006382 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065877Jy sigma=1.006382 ! Fit after self-cal, rms=0.064124Jy sigma=0.985964 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064124Jy sigma=0.985964 ! Fit after self-cal, rms=0.064132Jy sigma=0.985923 ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=8.306 mas, bpa=-2.678 degrees ! Estimated noise=0.775188 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00086989 Jy ! Component: 100 - total flux cleaned = -0.000785868 Jy ! Component: 150 - total flux cleaned = -0.000712614 Jy ! Component: 200 - total flux cleaned = -0.000668139 Jy ! Total flux subtracted in 200 components = -0.000668139 Jy ! Clean residual min=-0.003906 max=0.003142 Jy/beam ! Clean residual mean=-0.000038 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.218163 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.218163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064122Jy sigma=0.985397 ! Fit after self-cal, rms=0.064124Jy sigma=0.985388 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.729 mas, bmaj=17.58 mas, bpa=1.883 degrees ! Estimated noise=0.988648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00084419 Jy ! Component: 100 - total flux cleaned = 0.000995013 Jy ! Component: 150 - total flux cleaned = 0.00111572 Jy ! Component: 200 - total flux cleaned = 0.00121998 Jy ! Total flux subtracted in 200 components = 0.00121998 Jy ! Clean residual min=-0.004467 max=0.003582 Jy/beam ! Clean residual mean=-0.000072 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.219383 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.219383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064181Jy sigma=0.986024 ! Fit after self-cal, rms=0.064182Jy sigma=0.985797 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.439 mas, bmaj=6.441 mas, bpa=-2.796 degrees ! Estimated noise=1.16468 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.174262 Jy ! Component: 100 - total flux cleaned = 0.200617 Jy ! Component: 150 - total flux cleaned = 0.209557 Jy ! Component: 200 - total flux cleaned = 0.213542 Jy ! Total flux subtracted in 200 components = 0.213542 Jy ! Clean residual min=-0.004388 max=0.004260 Jy/beam ! Clean residual mean=-0.000020 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.213542 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.213542 Jy ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=8.306 mas, bpa=-2.678 degrees ! Estimated noise=0.775188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384382 Jy ! Component: 100 - total flux cleaned = 0.00446545 Jy ! Component: 150 - total flux cleaned = 0.00459228 Jy ! Component: 200 - total flux cleaned = 0.00465858 Jy ! Total flux subtracted in 200 components = 0.00465858 Jy ! Clean residual min=-0.003927 max=0.003265 Jy/beam ! Clean residual mean=-0.000038 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.218201 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.218201 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.729 mas, bmaj=17.58 mas, bpa=1.883 degrees ! Estimated noise=0.988648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828748 Jy ! Component: 100 - total flux cleaned = 0.000936306 Jy ! Component: 150 - total flux cleaned = 0.00107412 Jy ! Component: 200 - total flux cleaned = 0.00119483 Jy ! Total flux subtracted in 200 components = 0.00119483 Jy ! Clean residual min=-0.004483 max=0.003561 Jy/beam ! Clean residual mean=-0.000073 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.219396 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.219396 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=8.306 mas, bpa=-2.678 degrees ! Estimated noise=0.775188 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000738391 Jy ! Component: 100 - total flux cleaned = -0.00087366 Jy ! Component: 150 - total flux cleaned = -0.000904248 Jy ! Component: 200 - total flux cleaned = -0.000888182 Jy ! Total flux subtracted in 200 components = -0.000888182 Jy ! Clean residual min=-0.003812 max=0.003158 Jy/beam ! Clean residual mean=-0.000038 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.218508 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.218508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064133Jy sigma=0.985383 ! Fit after self-cal, rms=0.064128Jy sigma=0.985322 wmodel J2054-2016_S_2004_05_27_yyk\_map.mod ! Writing 46 model components to file: J2054-2016_S_2004_05_27_yyk_map.mod wobs J2054-2016_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2054-2016_S_2004_05_27_yyk_uvs.fits wwins J2054-2016_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J2054-2016_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151631 Jy ! Component: 100 - total flux cleaned = -0.00207497 Jy ! Component: 150 - total flux cleaned = -0.00253325 Jy ! Component: 200 - total flux cleaned = -0.00282185 Jy ! Component: 250 - total flux cleaned = -0.0028661 Jy ! Component: 300 - total flux cleaned = -0.00282056 Jy ! Component: 350 - total flux cleaned = -0.00256645 Jy ! Component: 400 - total flux cleaned = -0.00244367 Jy ! Component: 450 - total flux cleaned = -0.00236513 Jy ! Component: 500 - total flux cleaned = -0.0023261 Jy ! Component: 550 - total flux cleaned = -0.00221306 Jy ! Component: 600 - total flux cleaned = -0.00217581 Jy ! Component: 650 - total flux cleaned = -0.00210454 Jy ! Component: 700 - total flux cleaned = -0.00203449 Jy ! Component: 750 - total flux cleaned = -0.00193217 Jy ! Component: 800 - total flux cleaned = -0.00186529 Jy ! Component: 850 - total flux cleaned = -0.00170225 Jy ! Component: 900 - total flux cleaned = -0.00154311 Jy ! Component: 950 - total flux cleaned = -0.00141871 Jy ! Component: 1000 - total flux cleaned = -0.00132701 Jy ! Component: 1050 - total flux cleaned = -0.00123775 Jy ! Component: 1100 - total flux cleaned = -0.00129739 Jy ! Component: 1150 - total flux cleaned = -0.00118166 Jy ! Component: 1200 - total flux cleaned = -0.0010961 Jy ! Component: 1250 - total flux cleaned = -0.00104004 Jy ! Component: 1300 - total flux cleaned = -0.000957049 Jy ! Component: 1350 - total flux cleaned = -0.000929781 Jy ! Component: 1400 - total flux cleaned = -0.000768907 Jy ! Component: 1450 - total flux cleaned = -0.000742842 Jy ! Component: 1500 - total flux cleaned = -0.000612592 Jy ! Component: 1550 - total flux cleaned = -0.000535799 Jy ! Component: 1600 - total flux cleaned = -0.000409138 Jy ! Component: 1650 - total flux cleaned = -0.000359107 Jy ! Component: 1700 - total flux cleaned = -0.000259949 Jy ! Component: 1750 - total flux cleaned = -0.000162231 Jy ! Component: 1800 - total flux cleaned = 3.0414e-05 Jy ! Component: 1850 - total flux cleaned = 3.06411e-05 Jy ! Component: 1900 - total flux cleaned = 5.443e-05 Jy ! Component: 1950 - total flux cleaned = 0.000170437 Jy ! Component: 2000 - total flux cleaned = 0.000147501 Jy ! Total flux subtracted in 2048 components = 7.94779e-05 Jy ! Clean residual min=-0.001773 max=0.001472 Jy/beam ! Clean residual mean=-0.000025 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.218587 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 196 components and 0.218587 Jy ![Exited script file: muppet] wmap "J2054-2016_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.156 x 8.306 at -2.678 degrees (North through East) ! Clean map min=-0.0033433 max=0.20175 Jy/beam ! Writing clean map to FITS file: J2054-2016_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.201751 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000481329 device "J2054-2016_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2054-2016_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.715729 0.715729 1.43146 2.86292 5.72583 11.4517 22.9033 45.8066 91.6133 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.201 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.156 x 8.306 at -2.678 degrees (North through East) ! Clean map min=-0.0033433 max=0.20175 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2054-2016_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2054-2016_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2054-2016_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:50:25 2005