! Started logfile: J2044-0940_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:49:53 2005 obs J2044-0940_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2044-0940_S_2004_05_27_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.851852 visibilities/baseline/integration-bin. ! Found source: J2044-0940 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1388 lines of history. ! ! Reading 1380 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2044-0940_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.170103 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.844648Jy sigma=15.994547 ! Fit after self-cal, rms=0.844526Jy sigma=15.991523 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=6.871 mas, bpa=-3.112 degrees ! Estimated noise=1.44448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.132359 Jy ! Component: 100 - total flux cleaned = 0.155226 Jy ! Total flux subtracted in 100 components = 0.155226 Jy ! Clean residual min=-0.005816 max=0.006828 Jy/beam ! Clean residual mean=-0.000026 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.155226 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.155226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062534Jy sigma=1.042657 ! Fit after self-cal, rms=0.062504Jy sigma=1.042144 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=8.286 mas, bpa=-3.486 degrees ! Estimated noise=1.0857 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117333 Jy ! Component: 100 - total flux cleaned = 0.0161809 Jy ! Component: 150 - total flux cleaned = 0.0182382 Jy ! Component: 200 - total flux cleaned = 0.0187977 Jy ! Total flux subtracted in 200 components = 0.0187977 Jy ! Clean residual min=-0.004352 max=0.004877 Jy/beam ! Clean residual mean=-0.000013 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.174023 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 0.174023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060997Jy sigma=1.011530 ! Fit after self-cal, rms=0.060993Jy sigma=1.011415 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00217 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 0.89 KP 1.01 ! LA 1.05 MK 1.00 NL 0.98 OV 1.03 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.980206 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.06 HN 1.09 KP 1.01 ! LA 1.03 MK 1.00 NL 1.05 OV 0.98 ! PT 0.95 SC 0.90 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00024 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 1.00 KP 0.99 ! LA 0.95 MK 0.97 NL 1.11 OV 1.04 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02726 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 0.93 KP 0.89 ! LA 1.00* MK 1.01 NL 1.01 OV 0.86 ! PT 0.93 SC 1.13 ! ! ! Fit before self-cal, rms=0.060993Jy sigma=1.011415 ! Fit after self-cal, rms=0.058640Jy sigma=0.981936 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058640Jy sigma=0.981936 ! Fit after self-cal, rms=0.058649Jy sigma=0.981875 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=8.292 mas, bpa=-3.277 degrees ! Estimated noise=1.0807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000779325 Jy ! Component: 100 - total flux cleaned = 0.000778933 Jy ! Component: 150 - total flux cleaned = 0.000820508 Jy ! Component: 200 - total flux cleaned = 0.00085919 Jy ! Total flux subtracted in 200 components = 0.00085919 Jy ! Clean residual min=-0.003931 max=0.004125 Jy/beam ! Clean residual mean=-0.000015 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.174883 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.174883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058604Jy sigma=0.980890 ! Fit after self-cal, rms=0.058606Jy sigma=0.980882 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058606Jy sigma=0.980882 ! Fit after self-cal, rms=0.056748Jy sigma=0.948823 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510489 Jy ! Component: 100 - total flux cleaned = 0.000577553 Jy ! Component: 150 - total flux cleaned = 0.000578535 Jy ! Component: 200 - total flux cleaned = 0.000609548 Jy ! Total flux subtracted in 200 components = 0.000609548 Jy ! Clean residual min=-0.003937 max=0.004136 Jy/beam ! Clean residual mean=-0.000015 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.175492 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.175492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056706Jy sigma=0.948252 ! Fit after self-cal, rms=0.056461Jy sigma=0.944472 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 8.292 at -3.277 degrees (North through East) ! Clean map min=-0.0037875 max=0.15432 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056461Jy sigma=0.944472 ! Fit after self-cal, rms=0.055425Jy sigma=0.931452 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055425Jy sigma=0.931452 ! Fit after self-cal, rms=0.055397Jy sigma=0.930647 ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=8.195 mas, bpa=-3.215 degrees ! Estimated noise=1.07461 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000686731 Jy ! Component: 100 - total flux cleaned = 0.000795713 Jy ! Component: 150 - total flux cleaned = 0.000860806 Jy ! Component: 200 - total flux cleaned = 0.000890599 Jy ! Total flux subtracted in 200 components = 0.000890599 Jy ! Clean residual min=-0.003808 max=0.004188 Jy/beam ! Clean residual mean=-0.000010 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.176383 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.176383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055376Jy sigma=0.929979 ! Fit after self-cal, rms=0.055386Jy sigma=0.929757 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055386Jy sigma=0.929757 ! Fit after self-cal, rms=0.055256Jy sigma=0.918606 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055256Jy sigma=0.918606 ! Fit after self-cal, rms=0.055275Jy sigma=0.918501 ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=8.202 mas, bpa=-3.444 degrees ! Estimated noise=1.07878 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120634 Jy ! Component: 100 - total flux cleaned = 0.00129648 Jy ! Component: 150 - total flux cleaned = 0.00135037 Jy ! Component: 200 - total flux cleaned = 0.00137539 Jy ! Total flux subtracted in 200 components = 0.00137539 Jy ! Clean residual min=-0.003888 max=0.004215 Jy/beam ! Clean residual mean=-0.000008 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.177758 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.177758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055233Jy sigma=0.917890 ! Fit after self-cal, rms=0.055251Jy sigma=0.917850 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.673 mas, bmaj=15.02 mas, bpa=-0.08997 degrees ! Estimated noise=1.38292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000977505 Jy ! Component: 100 - total flux cleaned = 0.0010046 Jy ! Component: 150 - total flux cleaned = 0.00103224 Jy ! Component: 200 - total flux cleaned = 0.00105729 Jy ! Total flux subtracted in 200 components = 0.00105729 Jy ! Clean residual min=-0.004243 max=0.004721 Jy/beam ! Clean residual mean=-0.000017 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.178815 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 69 components and 0.178815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055253Jy sigma=0.918032 ! Fit after self-cal, rms=0.055271Jy sigma=0.917931 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=6.86 mas, bpa=-3.179 degrees ! Estimated noise=1.42505 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.131137 Jy ! Component: 100 - total flux cleaned = 0.154718 Jy ! Component: 150 - total flux cleaned = 0.164854 Jy ! Component: 200 - total flux cleaned = 0.170194 Jy ! Total flux subtracted in 200 components = 0.170194 Jy ! Clean residual min=-0.004634 max=0.004654 Jy/beam ! Clean residual mean=-0.000013 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.170194 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.170194 Jy ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=8.202 mas, bpa=-3.444 degrees ! Estimated noise=1.07878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446265 Jy ! Component: 100 - total flux cleaned = 0.00634825 Jy ! Component: 150 - total flux cleaned = 0.00684491 Jy ! Component: 200 - total flux cleaned = 0.00700802 Jy ! Total flux subtracted in 200 components = 0.00700802 Jy ! Clean residual min=-0.003886 max=0.004309 Jy/beam ! Clean residual mean=-0.000007 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.177202 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.177202 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.673 mas, bmaj=15.02 mas, bpa=-0.08997 degrees ! Estimated noise=1.38292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010764 Jy ! Component: 100 - total flux cleaned = 0.00117314 Jy ! Component: 150 - total flux cleaned = 0.00123211 Jy ! Component: 200 - total flux cleaned = 0.00128841 Jy ! Total flux subtracted in 200 components = 0.00128841 Jy ! Clean residual min=-0.004280 max=0.004806 Jy/beam ! Clean residual mean=-0.000016 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.17849 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.17849 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=8.202 mas, bpa=-3.444 degrees ! Estimated noise=1.07878 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00073641 Jy ! Component: 100 - total flux cleaned = -0.000850693 Jy ! Component: 150 - total flux cleaned = -0.000853987 Jy ! Component: 200 - total flux cleaned = -0.000854327 Jy ! Total flux subtracted in 200 components = -0.000854328 Jy ! Clean residual min=-0.003883 max=0.004255 Jy/beam ! Clean residual mean=-0.000008 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.177636 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.177636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055268Jy sigma=0.917971 ! Fit after self-cal, rms=0.055276Jy sigma=0.917914 wmodel J2044-0940_S_2004_05_27_yyk\_map.mod ! Writing 53 model components to file: J2044-0940_S_2004_05_27_yyk_map.mod wobs J2044-0940_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2044-0940_S_2004_05_27_yyk_uvs.fits wwins J2044-0940_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J2044-0940_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705165 Jy ! Component: 100 - total flux cleaned = 0.00083484 Jy ! Component: 150 - total flux cleaned = 0.00114235 Jy ! Component: 200 - total flux cleaned = 0.00149167 Jy ! Component: 250 - total flux cleaned = 0.00176858 Jy ! Component: 300 - total flux cleaned = 0.00218908 Jy ! Component: 350 - total flux cleaned = 0.0025471 Jy ! Component: 400 - total flux cleaned = 0.00274711 Jy ! Component: 450 - total flux cleaned = 0.00279633 Jy ! Component: 500 - total flux cleaned = 0.0026546 Jy ! Component: 550 - total flux cleaned = 0.00260836 Jy ! Component: 600 - total flux cleaned = 0.00265229 Jy ! Component: 650 - total flux cleaned = 0.00256224 Jy ! Component: 700 - total flux cleaned = 0.00256183 Jy ! Component: 750 - total flux cleaned = 0.00260422 Jy ! Component: 800 - total flux cleaned = 0.00264626 Jy ! Component: 850 - total flux cleaned = 0.00260485 Jy ! Component: 900 - total flux cleaned = 0.00256433 Jy ! Component: 950 - total flux cleaned = 0.00272201 Jy ! Component: 1000 - total flux cleaned = 0.00272181 Jy ! Component: 1050 - total flux cleaned = 0.00272223 Jy ! Component: 1100 - total flux cleaned = 0.00287424 Jy ! Component: 1150 - total flux cleaned = 0.00298632 Jy ! Component: 1200 - total flux cleaned = 0.00316841 Jy ! Component: 1250 - total flux cleaned = 0.00313158 Jy ! Component: 1300 - total flux cleaned = 0.00313172 Jy ! Component: 1350 - total flux cleaned = 0.00327256 Jy ! Component: 1400 - total flux cleaned = 0.00327253 Jy ! Component: 1450 - total flux cleaned = 0.00320439 Jy ! Component: 1500 - total flux cleaned = 0.00310321 Jy ! Component: 1550 - total flux cleaned = 0.0029707 Jy ! Component: 1600 - total flux cleaned = 0.0029704 Jy ! Component: 1650 - total flux cleaned = 0.00271211 Jy ! Component: 1700 - total flux cleaned = 0.002713 Jy ! Component: 1750 - total flux cleaned = 0.00255587 Jy ! Component: 1800 - total flux cleaned = 0.00255627 Jy ! Component: 1850 - total flux cleaned = 0.00249496 Jy ! Component: 1900 - total flux cleaned = 0.00240395 Jy ! Component: 1950 - total flux cleaned = 0.00234398 Jy ! Component: 2000 - total flux cleaned = 0.00225476 Jy ! Total flux subtracted in 2048 components = 0.00219612 Jy ! Clean residual min=-0.001858 max=0.001844 Jy/beam ! Clean residual mean=0.000002 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.179832 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 176 components and 0.179832 Jy ![Exited script file: muppet] wmap "J2044-0940_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 8.202 at -3.444 degrees (North through East) ! Clean map min=-0.003054 max=0.15391 Jy/beam ! Writing clean map to FITS file: J2044-0940_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.153914 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000607125 device "J2044-0940_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2044-0940_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18337 1.18337 2.36675 4.73349 9.46699 18.934 37.868 75.7359 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 8.202 at -3.444 degrees (North through East) ! Clean map min=-0.003054 max=0.15391 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2044-0940_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2044-0940_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2044-0940_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:49:57 2005