! Started logfile: J2018-1109_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:49:14 2005 obs J2018-1109_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J2018-1109_S_2004_05_27_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.822222 visibilities/baseline/integration-bin. ! Found source: J2018-1109 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1388 lines of history. ! ! Reading 1184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2018-1109_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.299565 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.709350Jy sigma=13.386690 ! Fit after self-cal, rms=0.709365Jy sigma=13.391485 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.539 mas, bmaj=6.757 mas, bpa=-2.54 degrees ! Estimated noise=1.55452 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.251362 Jy ! Component: 100 - total flux cleaned = 0.285828 Jy ! Total flux subtracted in 100 components = 0.285828 Jy ! Clean residual min=-0.006401 max=0.007320 Jy/beam ! Clean residual mean=-0.000041 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.285828 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.285828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061111Jy sigma=1.079984 ! Fit after self-cal, rms=0.061102Jy sigma=1.079733 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=8.33 mas, bpa=-3.442 degrees ! Estimated noise=1.16792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855774 Jy ! Component: 100 - total flux cleaned = 0.0115647 Jy ! Component: 150 - total flux cleaned = 0.011999 Jy ! Component: 200 - total flux cleaned = 0.0120026 Jy ! Total flux subtracted in 200 components = 0.0120026 Jy ! Clean residual min=-0.004648 max=0.004282 Jy/beam ! Clean residual mean=-0.000028 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.297831 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 0.297831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059809Jy sigma=1.064440 ! Fit after self-cal, rms=0.059805Jy sigma=1.064414 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.996402 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.08 HN 0.93 KP 0.99 ! LA 1.06 MK 0.99 NL 0.99 OV 1.01 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.98261 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.03 KP 1.03 ! LA 1.03 MK 1.02 NL 1.01 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00642 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.89 HN 0.96 KP 1.01 ! LA 0.93 MK 1.04 NL 1.05 OV 1.03 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03363 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 0.94 KP 0.90 ! LA 1.00* MK 1.01 NL 0.96 OV 0.86 ! PT 0.95 SC 1.10 ! ! ! Fit before self-cal, rms=0.059805Jy sigma=1.064414 ! Fit after self-cal, rms=0.055843Jy sigma=0.991984 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055843Jy sigma=0.991984 ! Fit after self-cal, rms=0.055842Jy sigma=0.991953 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=8.417 mas, bpa=-3.451 degrees ! Estimated noise=1.16881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.0343e-05 Jy ! Component: 100 - total flux cleaned = -2.88177e-05 Jy ! Component: 150 - total flux cleaned = 5.97746e-06 Jy ! Component: 200 - total flux cleaned = 3.59407e-05 Jy ! Total flux subtracted in 200 components = 3.59407e-05 Jy ! Clean residual min=-0.004481 max=0.003635 Jy/beam ! Clean residual mean=-0.000000 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.297867 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.297867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055772Jy sigma=0.991171 ! Fit after self-cal, rms=0.055769Jy sigma=0.991163 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055769Jy sigma=0.991163 ! Fit after self-cal, rms=0.054303Jy sigma=0.960900 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306666 Jy ! Component: 100 - total flux cleaned = 0.000335621 Jy ! Component: 150 - total flux cleaned = 0.000384978 Jy ! Component: 200 - total flux cleaned = 0.000406059 Jy ! Total flux subtracted in 200 components = 0.000406059 Jy ! Clean residual min=-0.004450 max=0.003663 Jy/beam ! Clean residual mean=-0.000000 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.298273 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.298273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054271Jy sigma=0.960553 ! Fit after self-cal, rms=0.054203Jy sigma=0.959029 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.299 x 8.417 at -3.451 degrees (North through East) ! Clean map min=-0.0042706 max=0.29037 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054203Jy sigma=0.959029 ! Fit after self-cal, rms=0.052745Jy sigma=0.923661 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052745Jy sigma=0.923661 ! Fit after self-cal, rms=0.052748Jy sigma=0.923534 ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=8.427 mas, bpa=-3.565 degrees ! Estimated noise=1.17153 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114527 Jy ! Component: 100 - total flux cleaned = 0.00114412 Jy ! Component: 150 - total flux cleaned = 0.00114583 Jy ! Component: 200 - total flux cleaned = 0.00111378 Jy ! Total flux subtracted in 200 components = 0.00111378 Jy ! Clean residual min=-0.003935 max=0.003334 Jy/beam ! Clean residual mean=0.000012 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.299387 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 65 components and 0.299387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052685Jy sigma=0.922539 ! Fit after self-cal, rms=0.052685Jy sigma=0.922519 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052685Jy sigma=0.922519 ! Fit after self-cal, rms=0.050949Jy sigma=0.890964 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050949Jy sigma=0.890964 ! Fit after self-cal, rms=0.050946Jy sigma=0.890941 ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=8.42 mas, bpa=-3.852 degrees ! Estimated noise=1.17129 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00086914 Jy ! Component: 100 - total flux cleaned = 0.000933363 Jy ! Component: 150 - total flux cleaned = 0.00093419 Jy ! Component: 200 - total flux cleaned = 0.000916881 Jy ! Total flux subtracted in 200 components = 0.000916881 Jy ! Clean residual min=-0.003912 max=0.003216 Jy/beam ! Clean residual mean=0.000021 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.300304 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.300304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050922Jy sigma=0.890398 ! Fit after self-cal, rms=0.050922Jy sigma=0.890386 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.937 mas, bmaj=15.27 mas, bpa=-2.114 degrees ! Estimated noise=1.47118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.34305e-05 Jy ! Component: 100 - total flux cleaned = -1.31412e-05 Jy ! Component: 150 - total flux cleaned = -4.75967e-05 Jy ! Component: 200 - total flux cleaned = -6.30714e-05 Jy ! Total flux subtracted in 200 components = -6.30714e-05 Jy ! Clean residual min=-0.003337 max=0.002935 Jy/beam ! Clean residual mean=0.000046 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.300241 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.300241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050926Jy sigma=0.890547 ! Fit after self-cal, rms=0.050927Jy sigma=0.890409 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=6.808 mas, bpa=-2.815 degrees ! Estimated noise=1.55645 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.251909 Jy ! Component: 100 - total flux cleaned = 0.28551 Jy ! Component: 150 - total flux cleaned = 0.294062 Jy ! Component: 200 - total flux cleaned = 0.297818 Jy ! Total flux subtracted in 200 components = 0.297818 Jy ! Clean residual min=-0.006267 max=0.004969 Jy/beam ! Clean residual mean=-0.000011 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.297818 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.297818 Jy ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=8.42 mas, bpa=-3.852 degrees ! Estimated noise=1.17129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214975 Jy ! Component: 100 - total flux cleaned = 0.00231969 Jy ! Component: 150 - total flux cleaned = 0.002392 Jy ! Component: 200 - total flux cleaned = 0.00242359 Jy ! Total flux subtracted in 200 components = 0.00242359 Jy ! Clean residual min=-0.003868 max=0.003323 Jy/beam ! Clean residual mean=0.000021 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.300241 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.300241 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.937 mas, bmaj=15.27 mas, bpa=-2.114 degrees ! Estimated noise=1.47118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106886 Jy ! Component: 100 - total flux cleaned = 3.66953e-05 Jy ! Component: 150 - total flux cleaned = 5.35792e-07 Jy ! Component: 200 - total flux cleaned = 4.76856e-07 Jy ! Total flux subtracted in 200 components = 4.76856e-07 Jy ! Clean residual min=-0.003382 max=0.002914 Jy/beam ! Clean residual mean=0.000046 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.300242 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.300242 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=8.42 mas, bpa=-3.852 degrees ! Estimated noise=1.17129 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.21347e-06 Jy ! Component: 100 - total flux cleaned = 5.10423e-05 Jy ! Component: 150 - total flux cleaned = 5.00954e-05 Jy ! Component: 200 - total flux cleaned = 7.24015e-05 Jy ! Total flux subtracted in 200 components = 7.24015e-05 Jy ! Clean residual min=-0.003859 max=0.003294 Jy/beam ! Clean residual mean=0.000021 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.300314 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.300314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050981Jy sigma=0.890868 ! Fit after self-cal, rms=0.050981Jy sigma=0.890856 wmodel J2018-1109_S_2004_05_27_yyk\_map.mod ! Writing 51 model components to file: J2018-1109_S_2004_05_27_yyk_map.mod wobs J2018-1109_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J2018-1109_S_2004_05_27_yyk_uvs.fits wwins J2018-1109_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J2018-1109_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120883 Jy ! Component: 100 - total flux cleaned = -0.00115625 Jy ! Component: 150 - total flux cleaned = -0.000931742 Jy ! Component: 200 - total flux cleaned = -0.000661844 Jy ! Component: 250 - total flux cleaned = -0.000557165 Jy ! Component: 300 - total flux cleaned = -0.000404093 Jy ! Component: 350 - total flux cleaned = -0.000403086 Jy ! Component: 400 - total flux cleaned = -0.000402264 Jy ! Component: 450 - total flux cleaned = -0.000448787 Jy ! Component: 500 - total flux cleaned = -0.000493775 Jy ! Component: 550 - total flux cleaned = -0.000625381 Jy ! Component: 600 - total flux cleaned = -0.000668003 Jy ! Component: 650 - total flux cleaned = -0.000710042 Jy ! Component: 700 - total flux cleaned = -0.00079362 Jy ! Component: 750 - total flux cleaned = -0.000834809 Jy ! Component: 800 - total flux cleaned = -0.000875282 Jy ! Component: 850 - total flux cleaned = -0.00099343 Jy ! Component: 900 - total flux cleaned = -0.000993512 Jy ! Component: 950 - total flux cleaned = -0.00114624 Jy ! Component: 1000 - total flux cleaned = -0.00125862 Jy ! Component: 1050 - total flux cleaned = -0.00140632 Jy ! Component: 1100 - total flux cleaned = -0.00155204 Jy ! Component: 1150 - total flux cleaned = -0.00169516 Jy ! Component: 1200 - total flux cleaned = -0.00173047 Jy ! Component: 1250 - total flux cleaned = -0.00183532 Jy ! Component: 1300 - total flux cleaned = -0.0019037 Jy ! Component: 1350 - total flux cleaned = -0.00200458 Jy ! Component: 1400 - total flux cleaned = -0.00200439 Jy ! Component: 1450 - total flux cleaned = -0.00207044 Jy ! Component: 1500 - total flux cleaned = -0.00213537 Jy ! Component: 1550 - total flux cleaned = -0.00223116 Jy ! Component: 1600 - total flux cleaned = -0.00226241 Jy ! Component: 1650 - total flux cleaned = -0.00235584 Jy ! Component: 1700 - total flux cleaned = -0.0024174 Jy ! Component: 1750 - total flux cleaned = -0.00250905 Jy ! Component: 1800 - total flux cleaned = -0.00262991 Jy ! Component: 1850 - total flux cleaned = -0.00265995 Jy ! Component: 1900 - total flux cleaned = -0.00274867 Jy ! Component: 1950 - total flux cleaned = -0.00289451 Jy ! Component: 2000 - total flux cleaned = -0.00298101 Jy ! Total flux subtracted in 2048 components = -0.00306653 Jy ! Clean residual min=-0.001665 max=0.001417 Jy/beam ! Clean residual mean=0.000009 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.297248 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 176 components and 0.297247 Jy ![Exited script file: muppet] wmap "J2018-1109_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 8.42 at -3.852 degrees (North through East) ! Clean map min=-0.0030414 max=0.29228 Jy/beam ! Writing clean map to FITS file: J2018-1109_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.292283 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000572574 device "J2018-1109_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2018-1109_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.587691 0.587691 1.17538 2.35077 4.70153 9.40306 18.8061 37.6122 75.2245 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.292 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 8.42 at -3.852 degrees (North through East) ! Clean map min=-0.0030414 max=0.29228 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2018-1109_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2018-1109_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2018-1109_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:49:18 2005