! Started logfile: J2017-2514_S_2004_05_27_yyk_uvs.log on Wed Dec  7 00:49:05 2005
obs J2017-2514_S_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J2017-2514_S_2004_05_27_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.940741 visibilities/baseline/integration-bin.
! Found source: J2017-2514
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1387 lines of history.
! 
! Reading 2540 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J2017-2514_S_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.139448 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.893203Jy  sigma=15.415567
! Fit after  self-cal, rms=0.891974Jy  sigma=15.414757
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.726 mas, bmaj=6.28 mas, bpa=-1.797 degrees
! Estimated noise=1.84135 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0906049 Jy
! Component: 100  -  total flux cleaned = 0.114717 Jy
! Total flux subtracted in 100 components = 0.114717 Jy
! Clean residual min=-0.007438 max=0.008373 Jy/beam
! Clean residual mean=0.000039 rms=0.002229 Jy/beam
! Combined flux in latest and established models = 0.114717 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.114717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079884Jy  sigma=1.196327
! Fit after  self-cal, rms=0.079882Jy  sigma=1.195348
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.688 mas, bmaj=9.115 mas, bpa=-4.611 degrees
! Estimated noise=0.996008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171323 Jy
! Component: 100  -  total flux cleaned = 0.0224291 Jy
! Component: 150  -  total flux cleaned = 0.0243266 Jy
! Component: 200  -  total flux cleaned = 0.0246645 Jy
! Total flux subtracted in 200 components = 0.0246645 Jy
! Clean residual min=-0.004183 max=0.005354 Jy/beam
! Clean residual mean=0.000070 rms=0.001304 Jy/beam
! Combined flux in latest and established models = 0.139382 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 51 components and 0.139382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077965Jy  sigma=1.148415
! Fit after  self-cal, rms=0.077944Jy  sigma=1.148354
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01124
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00*    KP        1.04     
!   LA        1.01     MK        0.84     NL        1.11     OV        1.08     
!   PT        0.94     SC        0.91     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.01682
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.95     HN        1.00*    KP        0.94     
!   LA        1.00*    MK        0.91     NL        1.07     OV        0.87     
!   PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.077944Jy  sigma=1.148354
! Fit after  self-cal, rms=0.077467Jy  sigma=1.138536
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077467Jy  sigma=1.138536
! Fit after  self-cal, rms=0.077468Jy  sigma=1.138509
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.575 mas, bmaj=8.945 mas, bpa=-5.767 degrees
! Estimated noise=0.991737 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170421 Jy
! Component: 100  -  total flux cleaned = 0.00179722 Jy
! Component: 150  -  total flux cleaned = 0.0019059 Jy
! Component: 200  -  total flux cleaned = 0.00201641 Jy
! Total flux subtracted in 200 components = 0.00201641 Jy
! Clean residual min=-0.003797 max=0.005293 Jy/beam
! Clean residual mean=0.000079 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 0.141398 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 64 components and 0.141398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077413Jy  sigma=1.137365
! Fit after  self-cal, rms=0.077402Jy  sigma=1.137348
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077402Jy  sigma=1.137348
! Fit after  self-cal, rms=0.072721Jy  sigma=1.014967
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234844 Jy
! Component: 100  -  total flux cleaned = 0.00208562 Jy
! Component: 150  -  total flux cleaned = 0.00196399 Jy
! Component: 200  -  total flux cleaned = 0.00195911 Jy
! Total flux subtracted in 200 components = 0.00195911 Jy
! Clean residual min=-0.003673 max=0.004811 Jy/beam
! Clean residual mean=0.000082 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.143357 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 68 components and 0.143357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072796Jy  sigma=1.010760
! Fit after  self-cal, rms=0.072476Jy  sigma=1.003139
! Inverting map 
! Added new window around map position (30, -5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00302891 Jy
! Component: 100  -  total flux cleaned = 0.00281793 Jy
! Component: 150  -  total flux cleaned = 0.00281714 Jy
! Component: 200  -  total flux cleaned = 0.00288171 Jy
! Total flux subtracted in 200 components = 0.00288171 Jy
! Clean residual min=-0.003193 max=0.003551 Jy/beam
! Clean residual mean=0.000074 rms=0.000934 Jy/beam
! Combined flux in latest and established models = 0.146239 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 89 components and 0.146239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072217Jy  sigma=0.997256
! Fit after  self-cal, rms=0.072210Jy  sigma=0.996116
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.575 x 8.945 at -5.767 degrees (North through East)
! Clean map  min=-0.0030848  max=0.11559 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072210Jy  sigma=0.996116
! Fit after  self-cal, rms=0.070305Jy  sigma=0.981580
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070305Jy  sigma=0.981580
! Fit after  self-cal, rms=0.070350Jy  sigma=0.981259
! Inverting map and beam 
! Estimated beam: bmin=3.554 mas, bmaj=8.754 mas, bpa=-5.407 degrees
! Estimated noise=0.976912 mJy/beam.
! Added new window around map position (-55.5, 53.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201823 Jy
! Component: 100  -  total flux cleaned = 0.00242266 Jy
! Component: 150  -  total flux cleaned = 0.00257452 Jy
! Component: 200  -  total flux cleaned = 0.00245028 Jy
! Total flux subtracted in 200 components = 0.00245028 Jy
! Clean residual min=-0.002575 max=0.002878 Jy/beam
! Clean residual mean=0.000045 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.148689 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 109 components and 0.148689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070051Jy  sigma=0.976702
! Fit after  self-cal, rms=0.070075Jy  sigma=0.976394
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070075Jy  sigma=0.976394
! Fit after  self-cal, rms=0.071661Jy  sigma=0.978158
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071661Jy  sigma=0.978158
! Fit after  self-cal, rms=0.071720Jy  sigma=0.977914
! Inverting map and beam 
! Estimated beam: bmin=3.557 mas, bmaj=8.801 mas, bpa=-5.127 degrees
! Estimated noise=0.980554 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113729 Jy
! Component: 100  -  total flux cleaned = -0.00134317 Jy
! Component: 150  -  total flux cleaned = -0.00134462 Jy
! Component: 200  -  total flux cleaned = -0.00134581 Jy
! Total flux subtracted in 200 components = -0.00134581 Jy
! Clean residual min=-0.003174 max=0.002753 Jy/beam
! Clean residual mean=0.000000 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.147343 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 125 components and 0.147343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071608Jy  sigma=0.975973
! Fit after  self-cal, rms=0.071618Jy  sigma=0.975884
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.154 mas, bmaj=22.18 mas, bpa=1.96 degrees
! Estimated noise=1.19843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203443 Jy
! Component: 100  -  total flux cleaned = 0.00011927 Jy
! Component: 150  -  total flux cleaned = 4.34853e-05 Jy
! Component: 200  -  total flux cleaned = 9.70974e-06 Jy
! Total flux subtracted in 200 components = 9.70974e-06 Jy
! Clean residual min=-0.003037 max=0.002678 Jy/beam
! Clean residual mean=0.000007 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.147353 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 137 components and 0.147353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071650Jy  sigma=0.975661
! Fit after  self-cal, rms=0.071634Jy  sigma=0.975608
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.7 mas, bmaj=6.232 mas, bpa=-2.117 degrees
! Estimated noise=1.78902 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0916486 Jy
! Component: 100  -  total flux cleaned = 0.116354 Jy
! Component: 150  -  total flux cleaned = 0.129167 Jy
! Component: 200  -  total flux cleaned = 0.133882 Jy
! Total flux subtracted in 200 components = 0.133882 Jy
! Clean residual min=-0.006320 max=0.006387 Jy/beam
! Clean residual mean=0.000003 rms=0.001816 Jy/beam
! Combined flux in latest and established models = 0.133882 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.133882 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.557 mas, bmaj=8.801 mas, bpa=-5.127 degrees
! Estimated noise=0.980554 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00854819 Jy
! Component: 100  -  total flux cleaned = 0.0110977 Jy
! Component: 150  -  total flux cleaned = 0.0116339 Jy
! Component: 200  -  total flux cleaned = 0.0116355 Jy
! Total flux subtracted in 200 components = 0.0116355 Jy
! Clean residual min=-0.003460 max=0.002932 Jy/beam
! Clean residual mean=-0.000001 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.145517 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 77 components and 0.145517 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.154 mas, bmaj=22.18 mas, bpa=1.96 degrees
! Estimated noise=1.19843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015615 Jy
! Component: 100  -  total flux cleaned = 0.00183472 Jy
! Component: 150  -  total flux cleaned = 0.00188819 Jy
! Component: 200  -  total flux cleaned = 0.00183926 Jy
! Total flux subtracted in 200 components = 0.00183926 Jy
! Clean residual min=-0.003157 max=0.002559 Jy/beam
! Clean residual mean=0.000007 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.147357 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.147357 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.557 mas, bmaj=8.801 mas, bpa=-5.127 degrees
! Estimated noise=0.980554 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253812 Jy
! Component: 100  -  total flux cleaned = -0.000207301 Jy
! Component: 150  -  total flux cleaned = -0.000478104 Jy
! Component: 200  -  total flux cleaned = -0.000788853 Jy
! Total flux subtracted in 200 components = -0.000788853 Jy
! Clean residual min=-0.003294 max=0.002930 Jy/beam
! Clean residual mean=0.000005 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.146568 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 115 components and 0.146568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071637Jy  sigma=0.976638
! Fit after  self-cal, rms=0.071636Jy  sigma=0.976510
wmodel J2017-2514_S_2004_05_27_yyk\_map.mod
! Writing 115 model components to file: J2017-2514_S_2004_05_27_yyk_map.mod
wobs J2017-2514_S_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J2017-2514_S_2004_05_27_yyk_uvs.fits
wwins J2017-2514_S_2004_05_27_yyk\_map.win
! wwins: Wrote 3 windows to J2017-2514_S_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000119547 Jy
! Component: 100  -  total flux cleaned = 2.34676e-05 Jy
! Component: 150  -  total flux cleaned = -2.04756e-05 Jy
! Component: 200  -  total flux cleaned = -1.88516e-05 Jy
! Component: 250  -  total flux cleaned = -1.8466e-05 Jy
! Component: 300  -  total flux cleaned = 0.000174652 Jy
! Component: 350  -  total flux cleaned = 0.000287308 Jy
! Component: 400  -  total flux cleaned = 0.000323528 Jy
! Component: 450  -  total flux cleaned = 0.000358562 Jy
! Component: 500  -  total flux cleaned = 0.00022196 Jy
! Component: 550  -  total flux cleaned = 9.05946e-05 Jy
! Component: 600  -  total flux cleaned = 0.000187894 Jy
! Component: 650  -  total flux cleaned = 0.00012497 Jy
! Component: 700  -  total flux cleaned = 6.34117e-05 Jy
! Component: 750  -  total flux cleaned = 6.41162e-05 Jy
! Component: 800  -  total flux cleaned = 6.5254e-05 Jy
! Component: 850  -  total flux cleaned = 7.74997e-06 Jy
! Component: 900  -  total flux cleaned = -2.01076e-05 Jy
! Component: 950  -  total flux cleaned = -0.00018802 Jy
! Component: 1000  -  total flux cleaned = -0.000242319 Jy
! Component: 1050  -  total flux cleaned = -0.000296769 Jy
! Component: 1100  -  total flux cleaned = -0.000349827 Jy
! Component: 1150  -  total flux cleaned = -0.000323175 Jy
! Component: 1200  -  total flux cleaned = -0.000479547 Jy
! Component: 1250  -  total flux cleaned = -0.000504773 Jy
! Component: 1300  -  total flux cleaned = -0.000504216 Jy
! Component: 1350  -  total flux cleaned = -0.000554189 Jy
! Component: 1400  -  total flux cleaned = -0.000504952 Jy
! Component: 1450  -  total flux cleaned = -0.000577829 Jy
! Component: 1500  -  total flux cleaned = -0.000505915 Jy
! Component: 1550  -  total flux cleaned = -0.000482437 Jy
! Component: 1600  -  total flux cleaned = -0.000412535 Jy
! Component: 1650  -  total flux cleaned = -0.000343369 Jy
! Component: 1700  -  total flux cleaned = -0.000274809 Jy
! Component: 1750  -  total flux cleaned = -0.000251703 Jy
! Component: 1800  -  total flux cleaned = -0.000184517 Jy
! Component: 1850  -  total flux cleaned = -0.000117859 Jy
! Component: 1900  -  total flux cleaned = -0.000117964 Jy
! Component: 1950  -  total flux cleaned = -0.000161158 Jy
! Component: 2000  -  total flux cleaned = -0.000139441 Jy
! Total flux subtracted in 2048 components = -0.000139458 Jy
! Clean residual min=-0.001314 max=0.001356 Jy/beam
! Clean residual mean=-0.000009 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.146428 Jy
keep
! Adding 133 model components to the UV plane model.
! The established model now contains 248 components and 0.146428 Jy
![Exited script file: muppet]
wmap "J2017-2514_S_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.557 x 8.801 at -5.127 degrees (North through East)
! Clean map  min=-0.0030552  max=0.11561 Jy/beam
! Writing clean map to FITS file: J2017-2514_S_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.115614 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000434104 
device "J2017-2514_S_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J2017-2514_S_2004_05_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.12643 1.12643 2.25286 4.50572 9.01145 18.0229 36.0458 72.0916
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.115 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.557 x 8.801 at -5.127 degrees (North through East)
! Clean map  min=-0.0030552  max=0.11561 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2017-2514_S_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J2017-2514_S_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J2017-2514_S_2004_05_27_yyk_uvs.log closed on Wed Dec  7 00:49:09 2005