! Started logfile: J1939-1525_X_2004_05_27_yyk_uvs.log on Wed Dec 7 00:48:21 2005 obs J1939-1525_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1939-1525_X_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1939-1525 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1378 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1939-1525_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.649859 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382705Jy sigma=6.328259 ! Fit after self-cal, rms=0.382632Jy sigma=6.326582 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6931 mas, bmaj=1.839 mas, bpa=4.526 degrees ! Estimated noise=2.10014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.533825 Jy ! Component: 100 - total flux cleaned = 0.63939 Jy ! Total flux subtracted in 100 components = 0.63939 Jy ! Clean residual min=-0.019611 max=0.032053 Jy/beam ! Clean residual mean=-0.000007 rms=0.006003 Jy/beam ! Combined flux in latest and established models = 0.63939 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.63939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107237Jy sigma=1.634961 ! Fit after self-cal, rms=0.106832Jy sigma=1.629180 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8422 mas, bmaj=2.135 mas, bpa=2.72 degrees ! Estimated noise=1.54943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0577105 Jy ! Component: 100 - total flux cleaned = 0.0804272 Jy ! Component: 150 - total flux cleaned = 0.0906228 Jy ! Component: 200 - total flux cleaned = 0.0955622 Jy ! Total flux subtracted in 200 components = 0.0955622 Jy ! Clean residual min=-0.015371 max=0.013224 Jy/beam ! Clean residual mean=0.000026 rms=0.003334 Jy/beam ! Combined flux in latest and established models = 0.734952 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 36 components and 0.734952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088230Jy sigma=1.194515 ! Fit after self-cal, rms=0.088181Jy sigma=1.193102 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00831 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.01 KP 0.98 ! LA 1.00 MK 0.98 NL 0.99 OV 1.03 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00612 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.04 KP 0.93 ! LA 0.98 MK 1.02 NL 0.98 OV 1.00 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.995368 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.94 KP 0.89 ! LA 0.99 MK 1.03 NL 0.99 OV 1.04 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.97886 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.97 KP 0.93 ! LA 1.00 MK 1.06 NL 1.00 OV 1.05 ! PT 1.09 SC 1.03 ! ! ! Fit before self-cal, rms=0.088181Jy sigma=1.193102 ! Fit after self-cal, rms=0.082175Jy sigma=1.052148 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082175Jy sigma=1.052148 ! Fit after self-cal, rms=0.082179Jy sigma=1.052121 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8479 mas, bmaj=2.148 mas, bpa=2.934 degrees ! Estimated noise=1.54777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -2.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100616 Jy ! Component: 100 - total flux cleaned = 0.00991943 Jy ! Component: 150 - total flux cleaned = 0.00938638 Jy ! Component: 200 - total flux cleaned = 0.00891791 Jy ! Total flux subtracted in 200 components = 0.00891791 Jy ! Clean residual min=-0.005864 max=0.005485 Jy/beam ! Clean residual mean=0.000004 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.74387 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.74387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080659Jy sigma=1.028102 ! Fit after self-cal, rms=0.080592Jy sigma=1.027239 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080592Jy sigma=1.027239 ! Fit after self-cal, rms=0.077471Jy sigma=0.980476 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292055 Jy ! Component: 100 - total flux cleaned = -7.5623e-05 Jy ! Component: 150 - total flux cleaned = -0.000396627 Jy ! Component: 200 - total flux cleaned = -0.000473063 Jy ! Total flux subtracted in 200 components = -0.000473063 Jy ! Clean residual min=-0.005851 max=0.005153 Jy/beam ! Clean residual mean=0.000004 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.743397 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.743397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077276Jy sigma=0.977120 ! Fit after self-cal, rms=0.077139Jy sigma=0.971223 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8479 x 2.148 at 2.934 degrees (North through East) ! Clean map min=-0.0054246 max=0.62794 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077139Jy sigma=0.971223 ! Fit after self-cal, rms=0.075901Jy sigma=0.937593 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075901Jy sigma=0.937593 ! Fit after self-cal, rms=0.076024Jy sigma=0.936760 ! Inverting map and beam ! Estimated beam: bmin=0.8461 mas, bmaj=2.145 mas, bpa=2.75 degrees ! Estimated noise=1.5452 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201334 Jy ! Component: 100 - total flux cleaned = 0.00201294 Jy ! Component: 150 - total flux cleaned = 0.00194949 Jy ! Component: 200 - total flux cleaned = 0.00200843 Jy ! Total flux subtracted in 200 components = 0.00200843 Jy ! Clean residual min=-0.004977 max=0.004901 Jy/beam ! Clean residual mean=-0.000000 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.745406 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.745406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075930Jy sigma=0.933975 ! Fit after self-cal, rms=0.075970Jy sigma=0.933563 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075970Jy sigma=0.933563 ! Fit after self-cal, rms=0.075638Jy sigma=0.922387 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075638Jy sigma=0.922387 ! Fit after self-cal, rms=0.075675Jy sigma=0.922362 ! Inverting map and beam ! Estimated beam: bmin=0.8446 mas, bmaj=2.143 mas, bpa=2.643 degrees ! Estimated noise=1.54474 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118853 Jy ! Component: 100 - total flux cleaned = 0.00130481 Jy ! Component: 150 - total flux cleaned = 0.00140985 Jy ! Component: 200 - total flux cleaned = 0.0015089 Jy ! Total flux subtracted in 200 components = 0.0015089 Jy ! Clean residual min=-0.005044 max=0.004808 Jy/beam ! Clean residual mean=-0.000000 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.746915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.746915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075623Jy sigma=0.920727 ! Fit after self-cal, rms=0.075606Jy sigma=0.920536 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=4.77 mas, bpa=7.201 degrees ! Estimated noise=1.99582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000287305 Jy ! Component: 100 - total flux cleaned = -0.000275348 Jy ! Component: 150 - total flux cleaned = -0.000237238 Jy ! Component: 200 - total flux cleaned = -0.000237802 Jy ! Total flux subtracted in 200 components = -0.000237802 Jy ! Clean residual min=-0.005986 max=0.004969 Jy/beam ! Clean residual mean=0.000003 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 0.746677 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 101 components and 0.746677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075569Jy sigma=0.920184 ! Fit after self-cal, rms=0.075537Jy sigma=0.919750 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6962 mas, bmaj=1.847 mas, bpa=4.53 degrees ! Estimated noise=2.09828 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.533752 Jy ! Component: 100 - total flux cleaned = 0.638284 Jy ! Component: 150 - total flux cleaned = 0.682728 Jy ! Component: 200 - total flux cleaned = 0.705299 Jy ! Total flux subtracted in 200 components = 0.705298 Jy ! Clean residual min=-0.008941 max=0.009088 Jy/beam ! Clean residual mean=-0.000009 rms=0.002409 Jy/beam ! Combined flux in latest and established models = 0.705298 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.705298 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8446 mas, bmaj=2.143 mas, bpa=2.643 degrees ! Estimated noise=1.54474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192864 Jy ! Component: 100 - total flux cleaned = 0.0286342 Jy ! Component: 150 - total flux cleaned = 0.0340106 Jy ! Component: 200 - total flux cleaned = 0.0365804 Jy ! Total flux subtracted in 200 components = 0.0365804 Jy ! Clean residual min=-0.005432 max=0.004683 Jy/beam ! Clean residual mean=-0.000004 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.741879 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 53 components and 0.741879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=4.77 mas, bpa=7.201 degrees ! Estimated noise=1.99582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280128 Jy ! Component: 100 - total flux cleaned = 0.00324307 Jy ! Component: 150 - total flux cleaned = 0.00340276 Jy ! Component: 200 - total flux cleaned = 0.00353811 Jy ! Total flux subtracted in 200 components = 0.00353811 Jy ! Clean residual min=-0.006305 max=0.004894 Jy/beam ! Clean residual mean=0.000001 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.745417 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.745417 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8446 mas, bmaj=2.143 mas, bpa=2.643 degrees ! Estimated noise=1.54474 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108775 Jy ! Component: 100 - total flux cleaned = 7.31177e-05 Jy ! Component: 150 - total flux cleaned = 0.000180978 Jy ! Component: 200 - total flux cleaned = 0.000327617 Jy ! Total flux subtracted in 200 components = 0.000327617 Jy ! Clean residual min=-0.005280 max=0.004814 Jy/beam ! Clean residual mean=-0.000001 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.745745 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.745745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075504Jy sigma=0.918404 ! Fit after self-cal, rms=0.075456Jy sigma=0.918085 wmodel J1939-1525_X_2004_05_27_yyk\_map.mod ! Writing 81 model components to file: J1939-1525_X_2004_05_27_yyk_map.mod wobs J1939-1525_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1939-1525_X_2004_05_27_yyk_uvs.fits wwins J1939-1525_X_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J1939-1525_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114243 Jy ! Component: 100 - total flux cleaned = -0.00156577 Jy ! Component: 150 - total flux cleaned = -0.00172098 Jy ! Component: 200 - total flux cleaned = -0.00193641 Jy ! Component: 250 - total flux cleaned = -0.00214089 Jy ! Component: 300 - total flux cleaned = -0.00253351 Jy ! Component: 350 - total flux cleaned = -0.00297076 Jy ! Component: 400 - total flux cleaned = -0.00344783 Jy ! Component: 450 - total flux cleaned = -0.00384878 Jy ! Component: 500 - total flux cleaned = -0.00417815 Jy ! Component: 550 - total flux cleaned = -0.00423207 Jy ! Component: 600 - total flux cleaned = -0.00423289 Jy ! Component: 650 - total flux cleaned = -0.00418342 Jy ! Component: 700 - total flux cleaned = -0.00418462 Jy ! Component: 750 - total flux cleaned = -0.00437256 Jy ! Component: 800 - total flux cleaned = -0.0043259 Jy ! Component: 850 - total flux cleaned = -0.00437333 Jy ! Component: 900 - total flux cleaned = -0.00463683 Jy ! Component: 950 - total flux cleaned = -0.00472075 Jy ! Component: 1000 - total flux cleaned = -0.00459589 Jy ! Component: 1050 - total flux cleaned = -0.00463792 Jy ! Component: 1100 - total flux cleaned = -0.00475706 Jy ! Component: 1150 - total flux cleaned = -0.00463903 Jy ! Component: 1200 - total flux cleaned = -0.00479374 Jy ! Component: 1250 - total flux cleaned = -0.00486935 Jy ! Component: 1300 - total flux cleaned = -0.00505394 Jy ! Component: 1350 - total flux cleaned = -0.00508978 Jy ! Component: 1400 - total flux cleaned = -0.00512543 Jy ! Component: 1450 - total flux cleaned = -0.00516023 Jy ! Component: 1500 - total flux cleaned = -0.00512575 Jy ! Component: 1550 - total flux cleaned = -0.00516028 Jy ! Component: 1600 - total flux cleaned = -0.00522781 Jy ! Component: 1650 - total flux cleaned = -0.00516138 Jy ! Component: 1700 - total flux cleaned = -0.0051286 Jy ! Component: 1750 - total flux cleaned = -0.005129 Jy ! Component: 1800 - total flux cleaned = -0.00506536 Jy ! Component: 1850 - total flux cleaned = -0.00503414 Jy ! Component: 1900 - total flux cleaned = -0.00500308 Jy ! Component: 1950 - total flux cleaned = -0.00488128 Jy ! Component: 2000 - total flux cleaned = -0.00494156 Jy ! Total flux subtracted in 2048 components = -0.00488191 Jy ! Clean residual min=-0.001788 max=0.001826 Jy/beam ! Clean residual mean=-0.000001 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.740863 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 219 components and 0.740863 Jy ![Exited script file: muppet] wmap "J1939-1525_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8446 x 2.143 at 2.643 degrees (North through East) ! Clean map min=-0.0033909 max=0.6301 Jy/beam ! Writing clean map to FITS file: J1939-1525_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.630102 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000540418 device "J1939-1525_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1939-1525_X_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.2573 0.2573 0.5146 1.0292 2.0584 4.1168 8.2336 16.4672 32.9344 65.8688 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.63 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8446 x 2.143 at 2.643 degrees (North through East) ! Clean map min=-0.0033909 max=0.6301 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1939-1525_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1939-1525_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1939-1525_X_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:48:25 2005