! Started logfile: J1939-1525_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:48:04 2005 obs J1939-1525_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1939-1525_S_2004_05_08_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.893333 visibilities/baseline/integration-bin. ! Found source: J1939-1525 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1939-1525_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.608054 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.426544Jy sigma=6.232089 ! Fit after self-cal, rms=0.426485Jy sigma=6.231024 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.706 mas, bmaj=6.557 mas, bpa=5.948 degrees ! Estimated noise=2.68828 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.503855 Jy ! Component: 100 - total flux cleaned = 0.593054 Jy ! Total flux subtracted in 100 components = 0.593054 Jy ! Clean residual min=-0.025555 max=0.032481 Jy/beam ! Clean residual mean=0.000296 rms=0.007230 Jy/beam ! Combined flux in latest and established models = 0.593054 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.593054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122526Jy sigma=1.616266 ! Fit after self-cal, rms=0.122486Jy sigma=1.615750 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=8.315 mas, bpa=4.611 degrees ! Estimated noise=1.79948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443097 Jy ! Component: 100 - total flux cleaned = 0.0604403 Jy ! Component: 150 - total flux cleaned = 0.0672862 Jy ! Component: 200 - total flux cleaned = 0.0684041 Jy ! Total flux subtracted in 200 components = 0.0684041 Jy ! Clean residual min=-0.015233 max=0.017452 Jy/beam ! Clean residual mean=-0.000139 rms=0.004343 Jy/beam ! Combined flux in latest and established models = 0.661458 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 37 components and 0.661458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115929Jy sigma=1.415263 ! Fit after self-cal, rms=0.115933Jy sigma=1.415047 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.976995 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.04 HN 1.18 KP 0.97 ! LA 1.10 MK 0.97 NL 0.99 OV 0.93 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.115933Jy sigma=1.415047 ! Fit after self-cal, rms=0.111192Jy sigma=1.338682 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111192Jy sigma=1.338682 ! Fit after self-cal, rms=0.111196Jy sigma=1.338674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=8.268 mas, bpa=4.763 degrees ! Estimated noise=1.78374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220388 Jy ! Component: 100 - total flux cleaned = -0.00154277 Jy ! Component: 150 - total flux cleaned = -0.00103997 Jy ! Component: 200 - total flux cleaned = -0.000732167 Jy ! Total flux subtracted in 200 components = -0.000732167 Jy ! Clean residual min=-0.012004 max=0.012734 Jy/beam ! Clean residual mean=0.000033 rms=0.003304 Jy/beam ! Combined flux in latest and established models = 0.660726 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.660726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110301Jy sigma=1.330921 ! Fit after self-cal, rms=0.110302Jy sigma=1.330886 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110302Jy sigma=1.330886 ! Fit after self-cal, rms=0.108185Jy sigma=1.300057 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118417 Jy ! Component: 100 - total flux cleaned = 0.000115443 Jy ! Component: 150 - total flux cleaned = 0.000184412 Jy ! Component: 200 - total flux cleaned = 0.000182426 Jy ! Total flux subtracted in 200 components = 0.000182426 Jy ! Clean residual min=-0.011759 max=0.013084 Jy/beam ! Clean residual mean=0.000034 rms=0.003296 Jy/beam ! Combined flux in latest and established models = 0.660909 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.660909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108024Jy sigma=1.298732 ! Fit after self-cal, rms=0.107828Jy sigma=1.296074 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 8.268 at 4.763 degrees (North through East) ! Clean map min=-0.011226 max=0.59318 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107828Jy sigma=1.296074 ! Fit after self-cal, rms=0.107888Jy sigma=1.275629 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107888Jy sigma=1.275629 ! Fit after self-cal, rms=0.107874Jy sigma=1.275329 ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=8.231 mas, bpa=4.724 degrees ! Estimated noise=1.80767 mJy/beam. ! Added new window around map position (-8.5, -12.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108726 Jy ! Component: 100 - total flux cleaned = 0.0127592 Jy ! Component: 150 - total flux cleaned = 0.0135811 Jy ! Component: 200 - total flux cleaned = 0.0144633 Jy ! Total flux subtracted in 200 components = 0.0144633 Jy ! Clean residual min=-0.010336 max=0.011065 Jy/beam ! Clean residual mean=0.000050 rms=0.002933 Jy/beam ! Combined flux in latest and established models = 0.675372 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 80 components and 0.675372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103972Jy sigma=1.227601 ! Fit after self-cal, rms=0.103759Jy sigma=1.223360 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103759Jy sigma=1.223360 ! Fit after self-cal, rms=0.096962Jy sigma=1.081331 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096962Jy sigma=1.081331 ! Fit after self-cal, rms=0.096962Jy sigma=1.081177 ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.311 mas, bpa=4.56 degrees ! Estimated noise=1.79135 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00382851 Jy ! Component: 100 - total flux cleaned = -0.00491593 Jy ! Component: 150 - total flux cleaned = -0.00557792 Jy ! Component: 200 - total flux cleaned = -0.00616246 Jy ! Total flux subtracted in 200 components = -0.00616246 Jy ! Clean residual min=-0.008027 max=0.008179 Jy/beam ! Clean residual mean=0.000016 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 0.669209 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.66921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095874Jy sigma=1.071895 ! Fit after self-cal, rms=0.095853Jy sigma=1.071627 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.75 mas, bmaj=18.94 mas, bpa=15.71 degrees ! Estimated noise=2.22564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142857 Jy ! Component: 100 - total flux cleaned = 9.6458e-05 Jy ! Component: 150 - total flux cleaned = 5.03006e-05 Jy ! Component: 200 - total flux cleaned = 5.09313e-06 Jy ! Total flux subtracted in 200 components = 5.09313e-06 Jy ! Clean residual min=-0.007864 max=0.009151 Jy/beam ! Clean residual mean=0.000017 rms=0.002582 Jy/beam ! Combined flux in latest and established models = 0.669215 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 107 components and 0.669215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095680Jy sigma=1.071141 ! Fit after self-cal, rms=0.095689Jy sigma=1.071048 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.558 mas, bpa=5.921 degrees ! Estimated noise=2.68718 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.504049 Jy ! Component: 100 - total flux cleaned = 0.595397 Jy ! Component: 150 - total flux cleaned = 0.630396 Jy ! Component: 200 - total flux cleaned = 0.643005 Jy ! Total flux subtracted in 200 components = 0.643005 Jy ! Clean residual min=-0.012933 max=0.013983 Jy/beam ! Clean residual mean=0.000134 rms=0.003737 Jy/beam ! Combined flux in latest and established models = 0.643005 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.643005 Jy ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.311 mas, bpa=4.56 degrees ! Estimated noise=1.79135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159859 Jy ! Component: 100 - total flux cleaned = 0.0221004 Jy ! Component: 150 - total flux cleaned = 0.0231207 Jy ! Component: 200 - total flux cleaned = 0.0236368 Jy ! Total flux subtracted in 200 components = 0.0236368 Jy ! Clean residual min=-0.008265 max=0.008662 Jy/beam ! Clean residual mean=0.000066 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 0.666642 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 60 components and 0.666641 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.75 mas, bmaj=18.94 mas, bpa=15.71 degrees ! Estimated noise=2.22564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231995 Jy ! Component: 100 - total flux cleaned = 0.00231932 Jy ! Component: 150 - total flux cleaned = 0.00239957 Jy ! Component: 200 - total flux cleaned = 0.0025184 Jy ! Total flux subtracted in 200 components = 0.0025184 Jy ! Clean residual min=-0.008133 max=0.009471 Jy/beam ! Clean residual mean=0.000026 rms=0.002566 Jy/beam ! Combined flux in latest and established models = 0.66916 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.66916 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.311 mas, bpa=4.56 degrees ! Estimated noise=1.79135 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351031 Jy ! Component: 100 - total flux cleaned = -0.000477791 Jy ! Component: 150 - total flux cleaned = -0.000605469 Jy ! Component: 200 - total flux cleaned = -0.000832823 Jy ! Total flux subtracted in 200 components = -0.000832823 Jy ! Clean residual min=-0.008475 max=0.008244 Jy/beam ! Clean residual mean=0.000035 rms=0.002085 Jy/beam ! Combined flux in latest and established models = 0.668327 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.668327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095346Jy sigma=1.070491 ! Fit after self-cal, rms=0.095321Jy sigma=1.070036 wmodel J1939-1525_S_2004_05_08_yyk\_map.mod ! Writing 86 model components to file: J1939-1525_S_2004_05_08_yyk_map.mod wobs J1939-1525_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1939-1525_S_2004_05_08_yyk_uvs.fits wwins J1939-1525_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J1939-1525_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185904 Jy ! Component: 100 - total flux cleaned = -0.00299564 Jy ! Component: 150 - total flux cleaned = -0.00426396 Jy ! Component: 200 - total flux cleaned = -0.00573431 Jy ! Component: 250 - total flux cleaned = -0.00642097 Jy ! Component: 300 - total flux cleaned = -0.00669609 Jy ! Component: 350 - total flux cleaned = -0.00696003 Jy ! Component: 400 - total flux cleaned = -0.00730177 Jy ! Component: 450 - total flux cleaned = -0.00771239 Jy ! Component: 500 - total flux cleaned = -0.00818805 Jy ! Component: 550 - total flux cleaned = -0.00864907 Jy ! Component: 600 - total flux cleaned = -0.00909734 Jy ! Component: 650 - total flux cleaned = -0.00938573 Jy ! Component: 700 - total flux cleaned = -0.00966864 Jy ! Component: 750 - total flux cleaned = -0.00973892 Jy ! Component: 800 - total flux cleaned = -0.0100086 Jy ! Component: 850 - total flux cleaned = -0.0101384 Jy ! Component: 900 - total flux cleaned = -0.0100732 Jy ! Component: 950 - total flux cleaned = -0.010072 Jy ! Component: 1000 - total flux cleaned = -0.00994922 Jy ! Component: 1050 - total flux cleaned = -0.00994876 Jy ! Component: 1100 - total flux cleaned = -0.0101247 Jy ! Component: 1150 - total flux cleaned = -0.0101257 Jy ! Component: 1200 - total flux cleaned = -0.0101822 Jy ! Component: 1250 - total flux cleaned = -0.0100699 Jy ! Component: 1300 - total flux cleaned = -0.00995926 Jy ! Component: 1350 - total flux cleaned = -0.00990516 Jy ! Component: 1400 - total flux cleaned = -0.00985243 Jy ! Component: 1450 - total flux cleaned = -0.00974857 Jy ! Component: 1500 - total flux cleaned = -0.00990232 Jy ! Component: 1550 - total flux cleaned = -0.00985074 Jy ! Component: 1600 - total flux cleaned = -0.0097509 Jy ! Component: 1650 - total flux cleaned = -0.0097513 Jy ! Component: 1700 - total flux cleaned = -0.00980047 Jy ! Component: 1750 - total flux cleaned = -0.00980041 Jy ! Component: 1800 - total flux cleaned = -0.00980017 Jy ! Component: 1850 - total flux cleaned = -0.00993966 Jy ! Component: 1900 - total flux cleaned = -0.00993949 Jy ! Component: 1950 - total flux cleaned = -0.00989439 Jy ! Component: 2000 - total flux cleaned = -0.0100742 Jy ! Total flux subtracted in 2048 components = -0.0100749 Jy ! Clean residual min=-0.002553 max=0.002349 Jy/beam ! Clean residual mean=0.000025 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.658252 Jy keep ! Adding 103 model components to the UV plane model. ! The established model now contains 189 components and 0.658252 Jy ![Exited script file: muppet] wmap "J1939-1525_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.477 x 8.311 at 4.56 degrees (North through East) ! Clean map min=-0.0098935 max=0.58582 Jy/beam ! Writing clean map to FITS file: J1939-1525_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.585824 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000844604 device "J1939-1525_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1939-1525_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.432521 0.432521 0.865042 1.73008 3.46017 6.92034 13.8407 27.6814 55.3627 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.585 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.477 x 8.311 at 4.56 degrees (North through East) ! Clean map min=-0.0098935 max=0.58582 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1939-1525_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1939-1525_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1939-1525_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:48:08 2005