! Started logfile: J1934-2416_X_2004_05_27_yyk_uvs.log on Wed Dec 7 01:10:21 2005 obs J1934-2416_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1934-2416_X_2004_05_27_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.686111 visibilities/baseline/integration-bin. ! Found source: J1934-2416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1383 lines of history. ! ! Reading 988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1934-2416_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.400x0.400 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.20951 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.811134Jy sigma=14.595656 ! Fit after self-cal, rms=0.810668Jy sigma=14.589377 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.072 mas, bmaj=5.77 mas, bpa=-1.411 degrees ! Estimated noise=1.80981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.162963 Jy ! Component: 100 - total flux cleaned = 0.20169 Jy ! Total flux subtracted in 100 components = 0.20169 Jy ! Clean residual min=-0.009566 max=0.012185 Jy/beam ! Clean residual mean=0.000012 rms=0.003004 Jy/beam ! Combined flux in latest and established models = 0.20169 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.20169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075392Jy sigma=1.119609 ! Fit after self-cal, rms=0.075367Jy sigma=1.119205 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.378 mas, bmaj=6.482 mas, bpa=-1.339 degrees ! Estimated noise=1.54049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175994 Jy ! Component: 100 - total flux cleaned = 0.0246676 Jy ! Component: 150 - total flux cleaned = 0.0286003 Jy ! Component: 200 - total flux cleaned = 0.0300474 Jy ! Total flux subtracted in 200 components = 0.0300474 Jy ! Clean residual min=-0.006188 max=0.006450 Jy/beam ! Clean residual mean=0.000091 rms=0.001861 Jy/beam ! Combined flux in latest and established models = 0.231737 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.231737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072799Jy sigma=1.058745 ! Fit after self-cal, rms=0.072783Jy sigma=1.058519 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01125 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.00* KP 1.02 ! LA 0.95 MK 1.00* NL 1.05 OV 1.02 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01075 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00* KP 0.93 ! LA 0.96 MK 1.00* NL 1.00 OV 1.01 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.999001 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 1.00* KP 0.87 ! LA 1.01 MK 1.00* NL 1.00 OV 1.01 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.973088 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.08 HN 1.00* KP 0.88 ! LA 1.01 MK 1.00* NL 1.03 OV 1.07 ! PT 1.17 SC 1.00* ! ! ! Fit before self-cal, rms=0.072783Jy sigma=1.058519 ! Fit after self-cal, rms=0.070888Jy sigma=1.018912 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070888Jy sigma=1.018912 ! Fit after self-cal, rms=0.070879Jy sigma=1.018782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.413 mas, bmaj=6.479 mas, bpa=-1.506 degrees ! Estimated noise=1.53956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000946006 Jy ! Component: 100 - total flux cleaned = -0.00110635 Jy ! Component: 150 - total flux cleaned = -0.00115156 Jy ! Component: 200 - total flux cleaned = -0.00111199 Jy ! Total flux subtracted in 200 components = -0.00111199 Jy ! Clean residual min=-0.005057 max=0.006295 Jy/beam ! Clean residual mean=0.000025 rms=0.001608 Jy/beam ! Combined flux in latest and established models = 0.230625 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.230625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070820Jy sigma=1.017529 ! Fit after self-cal, rms=0.070802Jy sigma=1.017421 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070802Jy sigma=1.017421 ! Fit after self-cal, rms=0.067025Jy sigma=0.944544 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773958 Jy ! Component: 100 - total flux cleaned = 0.000728863 Jy ! Component: 150 - total flux cleaned = 0.000731266 Jy ! Component: 200 - total flux cleaned = 0.000732063 Jy ! Total flux subtracted in 200 components = 0.000732063 Jy ! Clean residual min=-0.005374 max=0.006380 Jy/beam ! Clean residual mean=0.000026 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.231357 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.231357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067018Jy sigma=0.943592 ! Fit after self-cal, rms=0.066893Jy sigma=0.937348 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.413 x 6.479 at -1.506 degrees (North through East) ! Clean map min=-0.0051875 max=0.19539 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066893Jy sigma=0.937348 ! Fit after self-cal, rms=0.066516Jy sigma=0.914985 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066516Jy sigma=0.914985 ! Fit after self-cal, rms=0.066600Jy sigma=0.914122 ! Inverting map and beam ! Estimated beam: bmin=2.396 mas, bmaj=6.491 mas, bpa=-1.268 degrees ! Estimated noise=1.53044 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000580651 Jy ! Component: 100 - total flux cleaned = -0.000581033 Jy ! Component: 150 - total flux cleaned = -0.000545179 Jy ! Component: 200 - total flux cleaned = -0.000544394 Jy ! Total flux subtracted in 200 components = -0.000544394 Jy ! Clean residual min=-0.004505 max=0.005315 Jy/beam ! Clean residual mean=0.000024 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.230813 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.230813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066580Jy sigma=0.913352 ! Fit after self-cal, rms=0.066626Jy sigma=0.913184 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066626Jy sigma=0.913184 ! Fit after self-cal, rms=0.066835Jy sigma=0.904246 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066835Jy sigma=0.904246 ! Fit after self-cal, rms=0.066896Jy sigma=0.904172 ! Inverting map and beam ! Estimated beam: bmin=2.401 mas, bmaj=6.501 mas, bpa=-1.338 degrees ! Estimated noise=1.53186 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123696 Jy ! Component: 100 - total flux cleaned = -0.000123172 Jy ! Component: 150 - total flux cleaned = -0.000122821 Jy ! Component: 200 - total flux cleaned = -0.000147221 Jy ! Total flux subtracted in 200 components = -0.000147221 Jy ! Clean residual min=-0.004479 max=0.005278 Jy/beam ! Clean residual mean=0.000019 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.230665 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.230665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066885Jy sigma=0.903803 ! Fit after self-cal, rms=0.066903Jy sigma=0.903784 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=6.795 mas, bpa=0.2468 degrees ! Estimated noise=1.57064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000782718 Jy ! Component: 100 - total flux cleaned = -0.000909234 Jy ! Component: 150 - total flux cleaned = -0.000976182 Jy ! Component: 200 - total flux cleaned = -0.00103799 Jy ! Total flux subtracted in 200 components = -0.00103799 Jy ! Clean residual min=-0.004569 max=0.005270 Jy/beam ! Clean residual mean=0.000014 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 0.229627 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 60 components and 0.229627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066911Jy sigma=0.903675 ! Fit after self-cal, rms=0.066924Jy sigma=0.903655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.083 mas, bmaj=5.773 mas, bpa=-1.507 degrees ! Estimated noise=1.81796 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.164487 Jy ! Component: 100 - total flux cleaned = 0.202584 Jy ! Component: 150 - total flux cleaned = 0.218695 Jy ! Component: 200 - total flux cleaned = 0.224844 Jy ! Total flux subtracted in 200 components = 0.224844 Jy ! Clean residual min=-0.005470 max=0.006525 Jy/beam ! Clean residual mean=0.000020 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.224844 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.224844 Jy ! Inverting map and beam ! Estimated beam: bmin=2.401 mas, bmaj=6.501 mas, bpa=-1.338 degrees ! Estimated noise=1.53186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219606 Jy ! Component: 100 - total flux cleaned = 0.00256917 Jy ! Component: 150 - total flux cleaned = 0.00296146 Jy ! Component: 200 - total flux cleaned = 0.00329068 Jy ! Total flux subtracted in 200 components = 0.00329068 Jy ! Clean residual min=-0.004593 max=0.005399 Jy/beam ! Clean residual mean=0.000013 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.228135 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.228135 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=6.795 mas, bpa=0.2468 degrees ! Estimated noise=1.57064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127487 Jy ! Component: 100 - total flux cleaned = 0.000192669 Jy ! Component: 150 - total flux cleaned = 0.000281112 Jy ! Component: 200 - total flux cleaned = 0.000334181 Jy ! Total flux subtracted in 200 components = 0.000334181 Jy ! Clean residual min=-0.004606 max=0.005133 Jy/beam ! Clean residual mean=0.000012 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.228469 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.228469 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.401 mas, bmaj=6.501 mas, bpa=-1.338 degrees ! Estimated noise=1.53186 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336262 Jy ! Component: 100 - total flux cleaned = 0.000507202 Jy ! Component: 150 - total flux cleaned = 0.000659043 Jy ! Component: 200 - total flux cleaned = 0.000795121 Jy ! Total flux subtracted in 200 components = 0.000795121 Jy ! Clean residual min=-0.004412 max=0.005200 Jy/beam ! Clean residual mean=0.000017 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.229264 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.229264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066941Jy sigma=0.904159 ! Fit after self-cal, rms=0.066935Jy sigma=0.904133 wmodel J1934-2416_X_2004_05_27_yyk\_map.mod ! Writing 42 model components to file: J1934-2416_X_2004_05_27_yyk_map.mod wobs J1934-2416_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1934-2416_X_2004_05_27_yyk_uvs.fits wwins J1934-2416_X_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J1934-2416_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213333 Jy ! Component: 100 - total flux cleaned = 0.0029753 Jy ! Component: 150 - total flux cleaned = 0.00338247 Jy ! Component: 200 - total flux cleaned = 0.00394428 Jy ! Component: 250 - total flux cleaned = 0.0044768 Jy ! Component: 300 - total flux cleaned = 0.0046468 Jy ! Component: 350 - total flux cleaned = 0.00453926 Jy ! Component: 400 - total flux cleaned = 0.00448917 Jy ! Component: 450 - total flux cleaned = 0.00444085 Jy ! Component: 500 - total flux cleaned = 0.00439396 Jy ! Component: 550 - total flux cleaned = 0.00434859 Jy ! Component: 600 - total flux cleaned = 0.0043476 Jy ! Component: 650 - total flux cleaned = 0.00443181 Jy ! Component: 700 - total flux cleaned = 0.00443272 Jy ! Component: 750 - total flux cleaned = 0.00451262 Jy ! Component: 800 - total flux cleaned = 0.00462664 Jy ! Component: 850 - total flux cleaned = 0.00477332 Jy ! Component: 900 - total flux cleaned = 0.00491585 Jy ! Component: 950 - total flux cleaned = 0.0049154 Jy ! Component: 1000 - total flux cleaned = 0.00498259 Jy ! Total flux subtracted in 1024 components = 0.00504879 Jy ! Clean residual min=-0.002378 max=0.001810 Jy/beam ! Clean residual mean=0.000012 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.234313 Jy keep ! Adding 78 model components to the UV plane model. ! The established model now contains 120 components and 0.234313 Jy ![Exited script file: muppet] wmap "J1934-2416_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.401 x 6.501 at -1.338 degrees (North through East) ! Clean map min=-0.0035855 max=0.19525 Jy/beam ! Writing clean map to FITS file: J1934-2416_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.195249 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000749906 device "J1934-2416_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1934-2416_X_2004_05_27_yyk_map.eps/VPS' loglevs 1*100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15223 1.15223 2.30446 4.60891 9.21782 18.4356 36.8713 73.7426 print "clev=",int(1*3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.195 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.401 x 6.501 at -1.338 degrees (North through East) ! Clean map min=-0.0035855 max=0.19525 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1934-2416_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1934-2416_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1934-2416_X_2004_05_27_yyk_uvs.log closed on Wed Dec 7 01:10:22 2005