! Started logfile: J1925-3401_X_2004_04_30_yyk_uvs.log on Wed Dec 7 00:47:11 2005 obs J1925-3401_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1925-3401_X_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1925-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1550 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1925-3401_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.272865 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.758022Jy sigma=12.222465 ! Fit after self-cal, rms=0.757875Jy sigma=12.218015 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6041 mas, bmaj=1.796 mas, bpa=-3.089 degrees ! Estimated noise=2.58347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.197685 Jy ! Component: 100 - total flux cleaned = 0.259232 Jy ! Total flux subtracted in 100 components = 0.259232 Jy ! Clean residual min=-0.014191 max=0.022335 Jy/beam ! Clean residual mean=-0.000077 rms=0.004533 Jy/beam ! Combined flux in latest and established models = 0.259232 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.259232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089515Jy sigma=1.311030 ! Fit after self-cal, rms=0.089389Jy sigma=1.309281 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8083 mas, bmaj=2.162 mas, bpa=-1.11 degrees ! Estimated noise=1.8185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 0.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433038 Jy ! Component: 100 - total flux cleaned = 0.0592594 Jy ! Component: 150 - total flux cleaned = 0.0664303 Jy ! Component: 200 - total flux cleaned = 0.0695961 Jy ! Total flux subtracted in 200 components = 0.0695961 Jy ! Clean residual min=-0.010188 max=0.008366 Jy/beam ! Clean residual mean=0.000018 rms=0.002351 Jy/beam ! Combined flux in latest and established models = 0.328828 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.328828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076661Jy sigma=1.045920 ! Fit after self-cal, rms=0.076528Jy sigma=1.043815 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00602 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.00* KP 0.97 ! LA 1.00 MK 1.03 NL 1.04 OV 0.99 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00875 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00* KP 0.91 ! LA 0.95 MK 1.02 NL 1.05 OV 1.00 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00266 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.00* KP 0.87 ! LA 0.97 MK 0.91 NL 1.01 OV 1.04 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.986597 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 1.00* KP 0.94 ! LA 0.96 MK 0.94 NL 1.04 OV 1.04 ! PT 1.14 SC 0.97 ! ! ! Fit before self-cal, rms=0.076528Jy sigma=1.043815 ! Fit after self-cal, rms=0.074056Jy sigma=0.999915 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074056Jy sigma=0.999915 ! Fit after self-cal, rms=0.074060Jy sigma=0.999799 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7988 mas, bmaj=2.148 mas, bpa=-1.3 degrees ! Estimated noise=1.80851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163545 Jy ! Component: 100 - total flux cleaned = 0.00195872 Jy ! Component: 150 - total flux cleaned = 0.00195679 Jy ! Component: 200 - total flux cleaned = 0.00191081 Jy ! Total flux subtracted in 200 components = 0.00191082 Jy ! Clean residual min=-0.006719 max=0.006095 Jy/beam ! Clean residual mean=0.000009 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.330739 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.330739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073966Jy sigma=0.998480 ! Fit after self-cal, rms=0.073960Jy sigma=0.998214 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073960Jy sigma=0.998214 ! Fit after self-cal, rms=0.072229Jy sigma=0.968181 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556294 Jy ! Component: 100 - total flux cleaned = 0.000712659 Jy ! Component: 150 - total flux cleaned = 0.000665657 Jy ! Component: 200 - total flux cleaned = 0.000666361 Jy ! Total flux subtracted in 200 components = 0.000666361 Jy ! Clean residual min=-0.006678 max=0.006131 Jy/beam ! Clean residual mean=0.000010 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.331406 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.331405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072167Jy sigma=0.967214 ! Fit after self-cal, rms=0.072047Jy sigma=0.965102 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7988 x 2.148 at -1.3 degrees (North through East) ! Clean map min=-0.0062269 max=0.23893 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072047Jy sigma=0.965102 ! Fit after self-cal, rms=0.071917Jy sigma=0.962442 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071917Jy sigma=0.962442 ! Fit after self-cal, rms=0.071900Jy sigma=0.962274 ! Inverting map and beam ! Estimated beam: bmin=0.7974 mas, bmaj=2.144 mas, bpa=-1.399 degrees ! Estimated noise=1.80685 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455865 Jy ! Component: 100 - total flux cleaned = 0.000408423 Jy ! Component: 150 - total flux cleaned = 0.000322518 Jy ! Component: 200 - total flux cleaned = 0.000280479 Jy ! Total flux subtracted in 200 components = 0.000280479 Jy ! Clean residual min=-0.006642 max=0.006020 Jy/beam ! Clean residual mean=0.000006 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.331686 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.331686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071846Jy sigma=0.961522 ! Fit after self-cal, rms=0.071837Jy sigma=0.961453 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071837Jy sigma=0.961453 ! Fit after self-cal, rms=0.071273Jy sigma=0.949447 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071273Jy sigma=0.949447 ! Fit after self-cal, rms=0.071279Jy sigma=0.949432 ! Inverting map and beam ! Estimated beam: bmin=0.796 mas, bmaj=2.141 mas, bpa=-1.506 degrees ! Estimated noise=1.80504 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280698 Jy ! Component: 100 - total flux cleaned = 0.000238486 Jy ! Component: 150 - total flux cleaned = 0.000158099 Jy ! Component: 200 - total flux cleaned = 0.000119387 Jy ! Total flux subtracted in 200 components = 0.000119387 Jy ! Clean residual min=-0.006635 max=0.005820 Jy/beam ! Clean residual mean=0.000006 rms=0.001710 Jy/beam ! Combined flux in latest and established models = 0.331805 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.331805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071232Jy sigma=0.948771 ! Fit after self-cal, rms=0.071229Jy sigma=0.948732 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=8.27 mas, bpa=1.111 degrees ! Estimated noise=2.36935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121197 Jy ! Component: 100 - total flux cleaned = -5.20724e-05 Jy ! Component: 150 - total flux cleaned = 9.86059e-06 Jy ! Component: 200 - total flux cleaned = 6.23514e-05 Jy ! Total flux subtracted in 200 components = 6.23513e-05 Jy ! Clean residual min=-0.007263 max=0.007501 Jy/beam ! Clean residual mean=0.000009 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 0.331868 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.331868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071215Jy sigma=0.948679 ! Fit after self-cal, rms=0.071213Jy sigma=0.948573 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5988 mas, bmaj=1.791 mas, bpa=-3.345 degrees ! Estimated noise=2.55216 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.196798 Jy ! Component: 100 - total flux cleaned = 0.260129 Jy ! Component: 150 - total flux cleaned = 0.290966 Jy ! Component: 200 - total flux cleaned = 0.30711 Jy ! Total flux subtracted in 200 components = 0.30711 Jy ! Clean residual min=-0.009665 max=0.009275 Jy/beam ! Clean residual mean=-0.000031 rms=0.002619 Jy/beam ! Combined flux in latest and established models = 0.30711 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.30711 Jy ! Inverting map and beam ! Estimated beam: bmin=0.796 mas, bmaj=2.141 mas, bpa=-1.506 degrees ! Estimated noise=1.80504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013736 Jy ! Component: 100 - total flux cleaned = 0.0192933 Jy ! Component: 150 - total flux cleaned = 0.0214942 Jy ! Component: 200 - total flux cleaned = 0.0219487 Jy ! Total flux subtracted in 200 components = 0.0219487 Jy ! Clean residual min=-0.006671 max=0.005922 Jy/beam ! Clean residual mean=-0.000003 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 0.329059 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.329059 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=8.27 mas, bpa=1.111 degrees ! Estimated noise=2.36935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945503 Jy ! Component: 100 - total flux cleaned = 0.00107706 Jy ! Component: 150 - total flux cleaned = 0.00124111 Jy ! Component: 200 - total flux cleaned = 0.00135673 Jy ! Total flux subtracted in 200 components = 0.00135673 Jy ! Clean residual min=-0.007255 max=0.007480 Jy/beam ! Clean residual mean=-0.000001 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.330416 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.330416 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.796 mas, bmaj=2.141 mas, bpa=-1.506 degrees ! Estimated noise=1.80504 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000466629 Jy ! Component: 100 - total flux cleaned = -0.000411266 Jy ! Component: 150 - total flux cleaned = -0.000363067 Jy ! Component: 200 - total flux cleaned = -0.000315937 Jy ! Total flux subtracted in 200 components = -0.000315937 Jy ! Clean residual min=-0.006669 max=0.005832 Jy/beam ! Clean residual mean=0.000001 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.3301 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.3301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071352Jy sigma=0.950020 ! Fit after self-cal, rms=0.071313Jy sigma=0.949659 wmodel J1925-3401_X_2004_04_30_yyk\_map.mod ! Writing 58 model components to file: J1925-3401_X_2004_04_30_yyk_map.mod wobs J1925-3401_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1925-3401_X_2004_04_30_yyk_uvs.fits wwins J1925-3401_X_2004_04_30_yyk\_map.win ! wwins: Wrote 2 windows to J1925-3401_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213176 Jy ! Component: 100 - total flux cleaned = -0.00356601 Jy ! Component: 150 - total flux cleaned = -0.00460013 Jy ! Component: 200 - total flux cleaned = -0.00564596 Jy ! Component: 250 - total flux cleaned = -0.00622063 Jy ! Component: 300 - total flux cleaned = -0.00683945 Jy ! Component: 350 - total flux cleaned = -0.00728204 Jy ! Component: 400 - total flux cleaned = -0.00784577 Jy ! Component: 450 - total flux cleaned = -0.00818193 Jy ! Component: 500 - total flux cleaned = -0.00843952 Jy ! Component: 550 - total flux cleaned = -0.00856345 Jy ! Component: 600 - total flux cleaned = -0.00868203 Jy ! Component: 650 - total flux cleaned = -0.008855 Jy ! Component: 700 - total flux cleaned = -0.0090774 Jy ! Component: 750 - total flux cleaned = -0.00918462 Jy ! Component: 800 - total flux cleaned = -0.00944622 Jy ! Component: 850 - total flux cleaned = -0.00954735 Jy ! Component: 900 - total flux cleaned = -0.00959622 Jy ! Component: 950 - total flux cleaned = -0.00969241 Jy ! Component: 1000 - total flux cleaned = -0.00983159 Jy ! Component: 1050 - total flux cleaned = -0.00996688 Jy ! Component: 1100 - total flux cleaned = -0.0100545 Jy ! Component: 1150 - total flux cleaned = -0.010226 Jy ! Component: 1200 - total flux cleaned = -0.0102674 Jy ! Component: 1250 - total flux cleaned = -0.0103077 Jy ! Component: 1300 - total flux cleaned = -0.0103479 Jy ! Component: 1350 - total flux cleaned = -0.010348 Jy ! Component: 1400 - total flux cleaned = -0.0103874 Jy ! Component: 1450 - total flux cleaned = -0.0104246 Jy ! Component: 1500 - total flux cleaned = -0.0104243 Jy ! Component: 1550 - total flux cleaned = -0.0103883 Jy ! Component: 1600 - total flux cleaned = -0.0104235 Jy ! Component: 1650 - total flux cleaned = -0.0103891 Jy ! Component: 1700 - total flux cleaned = -0.0104921 Jy ! Component: 1750 - total flux cleaned = -0.0105593 Jy ! Component: 1800 - total flux cleaned = -0.0105262 Jy ! Component: 1850 - total flux cleaned = -0.0105266 Jy ! Component: 1900 - total flux cleaned = -0.010494 Jy ! Component: 1950 - total flux cleaned = -0.0104615 Jy ! Component: 2000 - total flux cleaned = -0.0104612 Jy ! Total flux subtracted in 2048 components = -0.0104612 Jy ! Clean residual min=-0.001877 max=0.001548 Jy/beam ! Clean residual mean=0.000006 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.319638 Jy keep ! Adding 100 model components to the UV plane model. ! The established model now contains 158 components and 0.319638 Jy ![Exited script file: muppet] wmap "J1925-3401_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.796 x 2.141 at -1.506 degrees (North through East) ! Clean map min=-0.0039114 max=0.24043 Jy/beam ! Writing clean map to FITS file: J1925-3401_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.240425 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000584883 device "J1925-3401_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1925-3401_X_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.729811 0.729811 1.45962 2.91925 5.83849 11.677 23.354 46.7079 93.4159 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.24 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.796 x 2.141 at -1.506 degrees (North through East) ! Clean map min=-0.0039114 max=0.24043 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1925-3401_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1925-3401_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1925-3401_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:47:15 2005