! Started logfile: J1855-1754_S_2004_05_27_yyk_uvs.log on Wed Dec 7 01:04:47 2005 obs J1855-1754_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1855-1754_S_2004_05_27_yyk_uve.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6 visibilities/baseline/integration-bin. ! Found source: J1855-1754 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 756 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1855-1754_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.142758 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897369Jy sigma=15.648674 ! Fit after self-cal, rms=0.884918Jy sigma=15.380538 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.089 mas, bmaj=17.17 mas, bpa=-1.629 degrees ! Estimated noise=2.42338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.097537 Jy ! Component: 100 - total flux cleaned = 0.126199 Jy ! Total flux subtracted in 100 components = 0.126199 Jy ! Clean residual min=-0.009104 max=0.009296 Jy/beam ! Clean residual mean=0.000057 rms=0.002944 Jy/beam ! Combined flux in latest and established models = 0.126199 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.126199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074105Jy sigma=1.108336 ! Fit after self-cal, rms=0.074039Jy sigma=1.106463 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.958 mas, bmaj=18.52 mas, bpa=0.4151 degrees ! Estimated noise=1.64601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172522 Jy ! Component: 100 - total flux cleaned = 0.0248995 Jy ! Component: 150 - total flux cleaned = 0.0289869 Jy ! Component: 200 - total flux cleaned = 0.0313038 Jy ! Total flux subtracted in 200 components = 0.0313038 Jy ! Clean residual min=-0.006460 max=0.005604 Jy/beam ! Clean residual mean=-0.000055 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.157503 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 52 components and 0.157503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071485Jy sigma=1.050247 ! Fit after self-cal, rms=0.071445Jy sigma=1.049605 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00139 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.05 HN 0.98 KP 0.93 ! LA 1.07 MK 1.00* NL 1.03 OV 1.00 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00396 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.85 HN 0.97 KP 0.92 ! LA 1.00 MK 1.00* NL 1.02 OV 1.04 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04393 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.90 HN 1.00* KP 0.89 ! LA 1.00* MK 1.00* NL 0.93 OV 0.86 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.071445Jy sigma=1.049605 ! Fit after self-cal, rms=0.069417Jy sigma=1.028488 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069417Jy sigma=1.028488 ! Fit after self-cal, rms=0.069408Jy sigma=1.028440 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.972 mas, bmaj=18.4 mas, bpa=0.1921 degrees ! Estimated noise=1.62751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119205 Jy ! Component: 100 - total flux cleaned = 0.00136051 Jy ! Component: 150 - total flux cleaned = 0.00153881 Jy ! Component: 200 - total flux cleaned = 0.00172643 Jy ! Total flux subtracted in 200 components = 0.00172643 Jy ! Clean residual min=-0.005428 max=0.005626 Jy/beam ! Clean residual mean=-0.000005 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.159229 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.159229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069381Jy sigma=1.027372 ! Fit after self-cal, rms=0.069374Jy sigma=1.027265 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069374Jy sigma=1.027265 ! Fit after self-cal, rms=0.066214Jy sigma=0.972437 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148695 Jy ! Component: 100 - total flux cleaned = 0.00180743 Jy ! Component: 150 - total flux cleaned = 0.00198998 Jy ! Component: 200 - total flux cleaned = 0.00211126 Jy ! Total flux subtracted in 200 components = 0.00211126 Jy ! Clean residual min=-0.004691 max=0.005366 Jy/beam ! Clean residual mean=0.000009 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.16134 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.16134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066144Jy sigma=0.971791 ! Fit after self-cal, rms=0.065892Jy sigma=0.968966 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.972 x 18.4 at 0.1921 degrees (North through East) ! Clean map min=-0.0045023 max=0.12066 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065892Jy sigma=0.968966 ! Fit after self-cal, rms=0.066202Jy sigma=0.960042 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066202Jy sigma=0.960042 ! Fit after self-cal, rms=0.066196Jy sigma=0.959755 ! Inverting map and beam ! Estimated beam: bmin=6.951 mas, bmaj=18.49 mas, bpa=0.0489 degrees ! Estimated noise=1.63006 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921268 Jy ! Component: 100 - total flux cleaned = 0.000977897 Jy ! Component: 150 - total flux cleaned = 0.00105165 Jy ! Component: 200 - total flux cleaned = 0.00109852 Jy ! Total flux subtracted in 200 components = 0.00109852 Jy ! Clean residual min=-0.004635 max=0.004699 Jy/beam ! Clean residual mean=0.000024 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.162439 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.162439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066161Jy sigma=0.959362 ! Fit after self-cal, rms=0.066160Jy sigma=0.959328 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066160Jy sigma=0.959328 ! Fit after self-cal, rms=0.066716Jy sigma=0.958246 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066716Jy sigma=0.958246 ! Fit after self-cal, rms=0.066724Jy sigma=0.958216 ! Inverting map and beam ! Estimated beam: bmin=6.987 mas, bmaj=18.23 mas, bpa=-0.5752 degrees ! Estimated noise=1.6188 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000758116 Jy ! Component: 100 - total flux cleaned = -0.000730163 Jy ! Component: 150 - total flux cleaned = -0.000676285 Jy ! Component: 200 - total flux cleaned = -0.000628348 Jy ! Total flux subtracted in 200 components = -0.000628348 Jy ! Clean residual min=-0.004384 max=0.005566 Jy/beam ! Clean residual mean=0.000006 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.161811 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.161811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066688Jy sigma=0.957685 ! Fit after self-cal, rms=0.066692Jy sigma=0.957616 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.15 mas, bmaj=19.46 mas, bpa=1.937 degrees ! Estimated noise=1.69534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464017 Jy ! Component: 100 - total flux cleaned = -0.000486809 Jy ! Component: 150 - total flux cleaned = -0.000507196 Jy ! Component: 200 - total flux cleaned = -0.000526379 Jy ! Total flux subtracted in 200 components = -0.00052638 Jy ! Clean residual min=-0.004081 max=0.004744 Jy/beam ! Clean residual mean=0.000014 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.161284 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 95 components and 0.161284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066672Jy sigma=0.957592 ! Fit after self-cal, rms=0.066666Jy sigma=0.957566 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.102 mas, bmaj=17.02 mas, bpa=-1.991 degrees ! Estimated noise=2.37057 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0970164 Jy ! Component: 100 - total flux cleaned = 0.126073 Jy ! Component: 150 - total flux cleaned = 0.139762 Jy ! Component: 200 - total flux cleaned = 0.147963 Jy ! Total flux subtracted in 200 components = 0.147963 Jy ! Clean residual min=-0.008761 max=0.007003 Jy/beam ! Clean residual mean=0.000068 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.147963 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.147963 Jy ! Inverting map and beam ! Estimated beam: bmin=6.987 mas, bmaj=18.23 mas, bpa=-0.5752 degrees ! Estimated noise=1.6188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759412 Jy ! Component: 100 - total flux cleaned = 0.0108404 Jy ! Component: 150 - total flux cleaned = 0.0123422 Jy ! Component: 200 - total flux cleaned = 0.0126349 Jy ! Total flux subtracted in 200 components = 0.0126349 Jy ! Clean residual min=-0.004671 max=0.005573 Jy/beam ! Clean residual mean=0.000012 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.160598 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.160598 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.15 mas, bmaj=19.46 mas, bpa=1.937 degrees ! Estimated noise=1.69534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.42163e-05 Jy ! Component: 100 - total flux cleaned = 1.17449e-05 Jy ! Component: 150 - total flux cleaned = 1.38812e-05 Jy ! Component: 200 - total flux cleaned = 3.31594e-05 Jy ! Total flux subtracted in 200 components = 3.31594e-05 Jy ! Clean residual min=-0.004244 max=0.004817 Jy/beam ! Clean residual mean=0.000019 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.160631 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.160631 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.987 mas, bmaj=18.23 mas, bpa=-0.5752 degrees ! Estimated noise=1.6188 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135827 Jy ! Component: 100 - total flux cleaned = 0.000329364 Jy ! Component: 150 - total flux cleaned = 0.000424405 Jy ! Component: 200 - total flux cleaned = 0.000510477 Jy ! Total flux subtracted in 200 components = 0.000510477 Jy ! Clean residual min=-0.004661 max=0.005549 Jy/beam ! Clean residual mean=0.000011 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.161142 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.161142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066631Jy sigma=0.957798 ! Fit after self-cal, rms=0.066622Jy sigma=0.957712 wmodel J1855-1754_S_2004_05_27_yyk\_map.mod ! Writing 74 model components to file: J1855-1754_S_2004_05_27_yyk_map.mod wobs J1855-1754_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1855-1754_S_2004_05_27_yyk_uvs.fits wwins J1855-1754_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J1855-1754_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670773 Jy ! Component: 100 - total flux cleaned = 0.000150278 Jy ! Component: 150 - total flux cleaned = -0.000322596 Jy ! Component: 200 - total flux cleaned = -0.000449637 Jy ! Component: 250 - total flux cleaned = -0.000388708 Jy ! Component: 300 - total flux cleaned = -0.000275358 Jy ! Component: 350 - total flux cleaned = -6.16617e-06 Jy ! Component: 400 - total flux cleaned = 9.56401e-05 Jy ! Component: 450 - total flux cleaned = 0.000145485 Jy ! Component: 500 - total flux cleaned = 0.000193856 Jy ! Component: 550 - total flux cleaned = 5.50594e-05 Jy ! Component: 600 - total flux cleaned = -7.97882e-05 Jy ! Component: 650 - total flux cleaned = -0.000124872 Jy ! Component: 700 - total flux cleaned = -0.000381797 Jy ! Component: 750 - total flux cleaned = -0.00059092 Jy ! Component: 800 - total flux cleaned = -0.000753752 Jy ! Component: 850 - total flux cleaned = -0.000793722 Jy ! Component: 900 - total flux cleaned = -0.00095118 Jy ! Component: 950 - total flux cleaned = -0.00106619 Jy ! Component: 1000 - total flux cleaned = -0.00117969 Jy ! Total flux subtracted in 1024 components = -0.00129119 Jy ! Clean residual min=-0.002223 max=0.002655 Jy/beam ! Clean residual mean=0.000003 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.159851 Jy keep ! Adding 62 model components to the UV plane model. ! The established model now contains 136 components and 0.159851 Jy ![Exited script file: muppet] wmap "J1855-1754_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.987 x 18.23 at -0.5752 degrees (North through East) ! Clean map min=-0.0041982 max=0.12027 Jy/beam ! Writing clean map to FITS file: J1855-1754_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120269 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000828593 device "J1855-1754_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1855-1754_S_2004_05_27_yyk_map.eps/VPS' loglevs 1*100*3*image_rms/peak_flux ! The new contour levels are: ! -2.06684 2.06684 4.13368 8.26736 16.5347 33.0694 66.1389 print "clev=",int(1*3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.987 x 18.23 at -0.5752 degrees (North through East) ! Clean map min=-0.0041982 max=0.12027 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1855-1754_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1855-1754_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1855-1754_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 01:04:48 2005