! Started logfile: J1853-3628_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:45:24 2005 obs J1853-3628_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1853-3628_S_2004_05_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1853-3628 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1433 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1853-3628_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.418134 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.685643Jy sigma=9.014417 ! Fit after self-cal, rms=0.685708Jy sigma=9.011744 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.293 mas, bmaj=7.284 mas, bpa=-5.691 degrees ! Estimated noise=2.1347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.279479 Jy ! Component: 100 - total flux cleaned = 0.382798 Jy ! Total flux subtracted in 100 components = 0.382798 Jy ! Clean residual min=-0.027792 max=0.056912 Jy/beam ! Clean residual mean=0.000294 rms=0.011456 Jy/beam ! Combined flux in latest and established models = 0.382798 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.382798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187404Jy sigma=2.807837 ! Fit after self-cal, rms=0.187291Jy sigma=2.805110 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=8.521 mas, bpa=-4.531 degrees ! Estimated noise=1.25614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.116886 Jy ! Component: 100 - total flux cleaned = 0.162461 Jy ! Component: 150 - total flux cleaned = 0.180485 Jy ! Component: 200 - total flux cleaned = 0.183848 Jy ! Total flux subtracted in 200 components = 0.183848 Jy ! Clean residual min=-0.031962 max=0.073804 Jy/beam ! Clean residual mean=0.000265 rms=0.014649 Jy/beam ! Combined flux in latest and established models = 0.566646 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.566646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156113Jy sigma=2.139794 ! Fit after self-cal, rms=0.156136Jy sigma=2.139579 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.156136Jy sigma=2.139579 ! Fit after self-cal, rms=0.156136Jy sigma=2.139579 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156136Jy sigma=2.139579 ! Fit after self-cal, rms=0.156132Jy sigma=2.139528 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=8.521 mas, bpa=-4.531 degrees ! Estimated noise=1.25614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743597 Jy ! Component: 100 - total flux cleaned = 0.102159 Jy ! Component: 150 - total flux cleaned = 0.119198 Jy ! Component: 200 - total flux cleaned = 0.125139 Jy ! Total flux subtracted in 200 components = 0.125139 Jy ! Clean residual min=-0.027689 max=0.036642 Jy/beam ! Clean residual mean=0.000232 rms=0.010674 Jy/beam ! Combined flux in latest and established models = 0.691784 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 93 components and 0.691784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134668Jy sigma=1.768554 ! Fit after self-cal, rms=0.133147Jy sigma=1.736023 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133147Jy sigma=1.736023 ! Fit after self-cal, rms=0.130918Jy sigma=1.705619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167436 Jy ! Component: 100 - total flux cleaned = 0.0199537 Jy ! Component: 150 - total flux cleaned = 0.0212149 Jy ! Component: 200 - total flux cleaned = 0.0226989 Jy ! Total flux subtracted in 200 components = 0.0226989 Jy ! Clean residual min=-0.025237 max=0.035796 Jy/beam ! Clean residual mean=0.000228 rms=0.009985 Jy/beam ! Combined flux in latest and established models = 0.714483 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.714483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128583Jy sigma=1.677863 ! Fit after self-cal, rms=0.128462Jy sigma=1.673334 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.054 x 8.521 at -4.531 degrees (North through East) ! Clean map min=-0.024661 max=0.31109 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128462Jy sigma=1.673334 ! Fit after self-cal, rms=0.128462Jy sigma=1.673334 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128462Jy sigma=1.673334 ! Fit after self-cal, rms=0.128456Jy sigma=1.673195 ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=8.521 mas, bpa=-4.531 degrees ! Estimated noise=1.25614 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464634 Jy ! Component: 100 - total flux cleaned = 0.00632717 Jy ! Component: 150 - total flux cleaned = 0.00710892 Jy ! Component: 200 - total flux cleaned = 0.00761818 Jy ! Total flux subtracted in 200 components = 0.00761818 Jy ! Clean residual min=-0.024601 max=0.035763 Jy/beam ! Clean residual mean=0.000229 rms=0.009853 Jy/beam ! Combined flux in latest and established models = 0.722101 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 0.722101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127128Jy sigma=1.661194 ! Fit after self-cal, rms=0.127130Jy sigma=1.660471 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127130Jy sigma=1.660471 ! Fit after self-cal, rms=0.126816Jy sigma=1.653915 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126816Jy sigma=1.653915 ! Fit after self-cal, rms=0.126813Jy sigma=1.653887 ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=8.49 mas, bpa=-4.655 degrees ! Estimated noise=1.25365 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302963 Jy ! Component: 100 - total flux cleaned = 0.00373041 Jy ! Component: 150 - total flux cleaned = 0.00395305 Jy ! Component: 200 - total flux cleaned = 0.00441035 Jy ! Total flux subtracted in 200 components = 0.00441035 Jy ! Clean residual min=-0.023483 max=0.034964 Jy/beam ! Clean residual mean=0.000213 rms=0.009561 Jy/beam ! Combined flux in latest and established models = 0.726512 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.726512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125819Jy sigma=1.645320 ! Fit after self-cal, rms=0.125825Jy sigma=1.644977 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.498 mas, bmaj=27.24 mas, bpa=1.341 degrees ! Estimated noise=1.61788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130967 Jy ! Component: 100 - total flux cleaned = 0.0142589 Jy ! Component: 150 - total flux cleaned = 0.0142623 Jy ! Component: 200 - total flux cleaned = 0.014506 Jy ! Total flux subtracted in 200 components = 0.014506 Jy ! Clean residual min=-0.032676 max=0.057156 Jy/beam ! Clean residual mean=0.000519 rms=0.015899 Jy/beam ! Combined flux in latest and established models = 0.741018 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 124 components and 0.741018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125583Jy sigma=1.642594 ! Fit after self-cal, rms=0.125585Jy sigma=1.642158 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=7.277 mas, bpa=-5.717 degrees ! Estimated noise=2.13008 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.279273 Jy ! Component: 100 - total flux cleaned = 0.384985 Jy ! Component: 150 - total flux cleaned = 0.454481 Jy ! Component: 200 - total flux cleaned = 0.503988 Jy ! Total flux subtracted in 200 components = 0.503988 Jy ! Clean residual min=-0.022726 max=0.039976 Jy/beam ! Clean residual mean=0.000176 rms=0.008816 Jy/beam ! Combined flux in latest and established models = 0.503988 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.503988 Jy ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=8.49 mas, bpa=-4.655 degrees ! Estimated noise=1.25365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816641 Jy ! Component: 100 - total flux cleaned = 0.130063 Jy ! Component: 150 - total flux cleaned = 0.162045 Jy ! Component: 200 - total flux cleaned = 0.183655 Jy ! Total flux subtracted in 200 components = 0.183655 Jy ! Clean residual min=-0.022884 max=0.033888 Jy/beam ! Clean residual mean=0.000216 rms=0.010184 Jy/beam ! Combined flux in latest and established models = 0.687642 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 103 components and 0.687642 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.498 mas, bmaj=27.24 mas, bpa=1.341 degrees ! Estimated noise=1.61788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297086 Jy ! Component: 100 - total flux cleaned = 0.0431212 Jy ! Component: 150 - total flux cleaned = 0.0474008 Jy ! Component: 200 - total flux cleaned = 0.0476595 Jy ! Total flux subtracted in 200 components = 0.0476595 Jy ! Clean residual min=-0.032988 max=0.057001 Jy/beam ! Clean residual mean=0.000539 rms=0.015921 Jy/beam ! Combined flux in latest and established models = 0.735302 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 0.735302 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=8.49 mas, bpa=-4.655 degrees ! Estimated noise=1.25365 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0103893 Jy ! Component: 100 - total flux cleaned = -0.0101677 Jy ! Component: 150 - total flux cleaned = -0.0099191 Jy ! Component: 200 - total flux cleaned = -0.00919921 Jy ! Total flux subtracted in 200 components = -0.00919921 Jy ! Clean residual min=-0.023437 max=0.034660 Jy/beam ! Clean residual mean=0.000234 rms=0.009583 Jy/beam ! Combined flux in latest and established models = 0.726103 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.726103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125983Jy sigma=1.647711 ! Fit after self-cal, rms=0.125940Jy sigma=1.647132 wmodel J1853-3628_S_2004_05_08_yyk\_map.mod ! Writing 121 model components to file: J1853-3628_S_2004_05_08_yyk_map.mod wobs J1853-3628_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1853-3628_S_2004_05_08_yyk_uvs.fits wwins J1853-3628_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J1853-3628_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147881 Jy ! Component: 100 - total flux cleaned = 0.0255816 Jy ! Component: 150 - total flux cleaned = 0.0320915 Jy ! Component: 200 - total flux cleaned = 0.0391758 Jy ! Component: 250 - total flux cleaned = 0.0460577 Jy ! Component: 300 - total flux cleaned = 0.052491 Jy ! Component: 350 - total flux cleaned = 0.0578906 Jy ! Component: 400 - total flux cleaned = 0.0629613 Jy ! Component: 450 - total flux cleaned = 0.0680328 Jy ! Component: 500 - total flux cleaned = 0.0728414 Jy ! Component: 550 - total flux cleaned = 0.0774069 Jy ! Component: 600 - total flux cleaned = 0.0817539 Jy ! Component: 650 - total flux cleaned = 0.0861216 Jy ! Component: 700 - total flux cleaned = 0.0894276 Jy ! Component: 750 - total flux cleaned = 0.0926073 Jy ! Component: 800 - total flux cleaned = 0.0952667 Jy ! Component: 850 - total flux cleaned = 0.0980282 Jy ! Component: 900 - total flux cleaned = 0.0999366 Jy ! Component: 950 - total flux cleaned = 0.100864 Jy ! Component: 1000 - total flux cleaned = 0.102498 Jy ! Component: 1050 - total flux cleaned = 0.103558 Jy ! Component: 1100 - total flux cleaned = 0.105101 Jy ! Component: 1150 - total flux cleaned = 0.106438 Jy ! Component: 1200 - total flux cleaned = 0.108069 Jy ! Component: 1250 - total flux cleaned = 0.109344 Jy ! Component: 1300 - total flux cleaned = 0.110125 Jy ! Component: 1350 - total flux cleaned = 0.111348 Jy ! Component: 1400 - total flux cleaned = 0.111948 Jy ! Component: 1450 - total flux cleaned = 0.112832 Jy ! Component: 1500 - total flux cleaned = 0.112978 Jy ! Component: 1550 - total flux cleaned = 0.113548 Jy ! Component: 1600 - total flux cleaned = 0.113828 Jy ! Component: 1650 - total flux cleaned = 0.113965 Jy ! Component: 1700 - total flux cleaned = 0.113829 Jy ! Component: 1750 - total flux cleaned = 0.113693 Jy ! Component: 1800 - total flux cleaned = 0.113423 Jy ! Component: 1850 - total flux cleaned = 0.112893 Jy ! Component: 1900 - total flux cleaned = 0.113023 Jy ! Component: 1950 - total flux cleaned = 0.112499 Jy ! Component: 2000 - total flux cleaned = 0.11211 Jy ! Total flux subtracted in 2048 components = 0.111854 Jy ! Clean residual min=-0.008255 max=0.007367 Jy/beam ! Clean residual mean=-0.000002 rms=0.003218 Jy/beam ! Combined flux in latest and established models = 0.837956 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 349 components and 0.837956 Jy ![Exited script file: muppet] wmap "J1853-3628_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.045 x 8.49 at -4.655 degrees (North through East) ! Clean map min=-0.017699 max=0.30241 Jy/beam ! Writing clean map to FITS file: J1853-3628_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.302409 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00312008 device "J1853-3628_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1853-3628_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.09522 3.09522 6.19044 12.3809 24.7618 49.5235 99.047 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0093 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.302 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.045 x 8.49 at -4.655 degrees (North through East) ! Clean map min=-0.017699 max=0.30241 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1853-3628_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1853-3628_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1853-3628_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:45:29 2005