! Started logfile: J1846-0651_X_2004_05_08_yyk_uvs.log on Wed Dec 7 01:10:39 2005 obs J1846-0651_X_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1846-0651_X_2004_05_08_yyk_uve.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.733333 visibilities/baseline/integration-bin. ! Found source: J1846-0651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1438 lines of history. ! ! Reading 1980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1846-0651_X_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.400x0.400 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.125644 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905844Jy sigma=18.527868 ! Fit after self-cal, rms=0.905603Jy sigma=18.515623 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.332 mas, bmaj=3.837 mas, bpa=-6.652 degrees ! Estimated noise=1.31651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0802878 Jy ! Component: 100 - total flux cleaned = 0.101129 Jy ! Total flux subtracted in 100 components = 0.101129 Jy ! Clean residual min=-0.006335 max=0.007586 Jy/beam ! Clean residual mean=-0.000038 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.101129 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.101129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076399Jy sigma=1.248801 ! Fit after self-cal, rms=0.076373Jy sigma=1.247238 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.78 mas, bmaj=4.285 mas, bpa=-6.869 degrees ! Estimated noise=0.884283 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100844 Jy ! Component: 100 - total flux cleaned = 0.0139983 Jy ! Component: 150 - total flux cleaned = 0.0154282 Jy ! Component: 200 - total flux cleaned = 0.0159422 Jy ! Total flux subtracted in 200 components = 0.0159422 Jy ! Clean residual min=-0.004661 max=0.005934 Jy/beam ! Clean residual mean=-0.000023 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.117072 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 0.117072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075263Jy sigma=1.224679 ! Fit after self-cal, rms=0.075232Jy sigma=1.223550 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.996662 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.99 HN 1.04 KP 0.91 ! LA 0.99 MK 1.00* NL 1.00 OV 0.91 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.075232Jy sigma=1.223550 ! Fit after self-cal, rms=0.075456Jy sigma=1.219516 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075456Jy sigma=1.219516 ! Fit after self-cal, rms=0.075448Jy sigma=1.218747 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.79 mas, bmaj=4.367 mas, bpa=-7.278 degrees ! Estimated noise=0.878826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000935091 Jy ! Component: 100 - total flux cleaned = -0.0011717 Jy ! Component: 150 - total flux cleaned = -0.00136325 Jy ! Component: 200 - total flux cleaned = -0.00155183 Jy ! Total flux subtracted in 200 components = -0.00155183 Jy ! Clean residual min=-0.004843 max=0.006118 Jy/beam ! Clean residual mean=-0.000018 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.11552 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.11552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075428Jy sigma=1.217650 ! Fit after self-cal, rms=0.075410Jy sigma=1.216895 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075410Jy sigma=1.216895 ! Fit after self-cal, rms=0.072018Jy sigma=1.116059 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183985 Jy ! Component: 100 - total flux cleaned = 0.00189301 Jy ! Component: 150 - total flux cleaned = 0.00189088 Jy ! Component: 200 - total flux cleaned = 0.00192681 Jy ! Total flux subtracted in 200 components = 0.00192681 Jy ! Clean residual min=-0.004749 max=0.005321 Jy/beam ! Clean residual mean=-0.000019 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.117447 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.117447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071957Jy sigma=1.113879 ! Fit after self-cal, rms=0.071776Jy sigma=1.105967 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.79 x 4.367 at -7.278 degrees (North through East) ! Clean map min=-0.0044933 max=0.10062 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071776Jy sigma=1.105967 ! Fit after self-cal, rms=0.071471Jy sigma=1.105440 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071471Jy sigma=1.105440 ! Fit after self-cal, rms=0.071531Jy sigma=1.103928 ! Inverting map and beam ! Estimated beam: bmin=1.768 mas, bmaj=4.389 mas, bpa=-7.291 degrees ! Estimated noise=0.872598 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351524 Jy ! Component: 100 - total flux cleaned = -0.000427216 Jy ! Component: 150 - total flux cleaned = -0.000448081 Jy ! Component: 200 - total flux cleaned = -0.000426809 Jy ! Total flux subtracted in 200 components = -0.000426809 Jy ! Clean residual min=-0.004652 max=0.005299 Jy/beam ! Clean residual mean=-0.000020 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.11702 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.11702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071515Jy sigma=1.103579 ! Fit after self-cal, rms=0.071563Jy sigma=1.103184 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071563Jy sigma=1.103184 ! Fit after self-cal, rms=0.071433Jy sigma=1.101452 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071433Jy sigma=1.101452 ! Fit after self-cal, rms=0.071454Jy sigma=1.101126 ! Inverting map and beam ! Estimated beam: bmin=1.769 mas, bmaj=4.425 mas, bpa=-7.596 degrees ! Estimated noise=0.870263 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000867337 Jy ! Component: 100 - total flux cleaned = -0.000992157 Jy ! Component: 150 - total flux cleaned = -0.000991984 Jy ! Component: 200 - total flux cleaned = -0.000992255 Jy ! Total flux subtracted in 200 components = -0.000992255 Jy ! Clean residual min=-0.004640 max=0.005274 Jy/beam ! Clean residual mean=-0.000023 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.116028 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.116028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071453Jy sigma=1.100770 ! Fit after self-cal, rms=0.071466Jy sigma=1.100704 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=4.614 mas, bpa=-6.467 degrees ! Estimated noise=0.927278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991326 Jy ! Component: 100 - total flux cleaned = 0.00106025 Jy ! Component: 150 - total flux cleaned = 0.00117234 Jy ! Component: 200 - total flux cleaned = 0.00124884 Jy ! Total flux subtracted in 200 components = 0.00124884 Jy ! Clean residual min=-0.004804 max=0.005615 Jy/beam ! Clean residual mean=-0.000024 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 0.117276 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.117276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071502Jy sigma=1.100832 ! Fit after self-cal, rms=0.071502Jy sigma=1.100709 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.328 mas, bmaj=3.906 mas, bpa=-7.008 degrees ! Estimated noise=1.30235 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0820209 Jy ! Component: 100 - total flux cleaned = 0.101696 Jy ! Component: 150 - total flux cleaned = 0.10956 Jy ! Component: 200 - total flux cleaned = 0.112739 Jy ! Total flux subtracted in 200 components = 0.112739 Jy ! Clean residual min=-0.005153 max=0.005367 Jy/beam ! Clean residual mean=-0.000016 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 0.112739 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.112739 Jy ! Inverting map and beam ! Estimated beam: bmin=1.769 mas, bmaj=4.425 mas, bpa=-7.596 degrees ! Estimated noise=0.870263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320306 Jy ! Component: 100 - total flux cleaned = 0.00337415 Jy ! Component: 150 - total flux cleaned = 0.00337842 Jy ! Component: 200 - total flux cleaned = 0.0033829 Jy ! Total flux subtracted in 200 components = 0.0033829 Jy ! Clean residual min=-0.004741 max=0.005324 Jy/beam ! Clean residual mean=-0.000023 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.116121 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.116121 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=4.614 mas, bpa=-6.467 degrees ! Estimated noise=0.927278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123658 Jy ! Component: 100 - total flux cleaned = 0.00127542 Jy ! Component: 150 - total flux cleaned = 0.00134901 Jy ! Component: 200 - total flux cleaned = 0.00144382 Jy ! Total flux subtracted in 200 components = 0.00144382 Jy ! Clean residual min=-0.004837 max=0.005659 Jy/beam ! Clean residual mean=-0.000024 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.117565 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.117565 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.769 mas, bmaj=4.425 mas, bpa=-7.596 degrees ! Estimated noise=0.870263 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000621217 Jy ! Component: 100 - total flux cleaned = -0.000723675 Jy ! Component: 150 - total flux cleaned = -0.000754794 Jy ! Component: 200 - total flux cleaned = -0.000782845 Jy ! Total flux subtracted in 200 components = -0.000782845 Jy ! Clean residual min=-0.004684 max=0.005163 Jy/beam ! Clean residual mean=-0.000022 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.116782 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.116782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071526Jy sigma=1.100970 ! Fit after self-cal, rms=0.071524Jy sigma=1.100906 wmodel J1846-0651_X_2004_05_08_yyk\_map.mod ! Writing 32 model components to file: J1846-0651_X_2004_05_08_yyk_map.mod wobs J1846-0651_X_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1846-0651_X_2004_05_08_yyk_uvs.fits wwins J1846-0651_X_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1846-0651_X_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741492 Jy ! Component: 100 - total flux cleaned = 0.000664928 Jy ! Component: 150 - total flux cleaned = 0.000331708 Jy ! Component: 200 - total flux cleaned = 0.000145313 Jy ! Component: 250 - total flux cleaned = 0.000310571 Jy ! Component: 300 - total flux cleaned = 0.000467958 Jy ! Component: 350 - total flux cleaned = 0.000818082 Jy ! Component: 400 - total flux cleaned = 0.00105474 Jy ! Component: 450 - total flux cleaned = 0.00141609 Jy ! Component: 500 - total flux cleaned = 0.00176378 Jy ! Component: 550 - total flux cleaned = 0.00201519 Jy ! Component: 600 - total flux cleaned = 0.00225873 Jy ! Component: 650 - total flux cleaned = 0.00257222 Jy ! Component: 700 - total flux cleaned = 0.00279814 Jy ! Component: 750 - total flux cleaned = 0.00298218 Jy ! Component: 800 - total flux cleaned = 0.0032681 Jy ! Component: 850 - total flux cleaned = 0.00354593 Jy ! Component: 900 - total flux cleaned = 0.00378318 Jy ! Component: 950 - total flux cleaned = 0.00388252 Jy ! Component: 1000 - total flux cleaned = 0.0040114 Jy ! Total flux subtracted in 1024 components = 0.00391617 Jy ! Clean residual min=-0.001718 max=0.001769 Jy/beam ! Clean residual mean=-0.000018 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.120699 Jy keep ! Adding 68 model components to the UV plane model. ! The established model now contains 100 components and 0.120698 Jy ![Exited script file: muppet] wmap "J1846-0651_X_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.769 x 4.425 at -7.596 degrees (North through East) ! Clean map min=-0.0031903 max=0.099514 Jy/beam ! Writing clean map to FITS file: J1846-0651_X_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0995143 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000664407 device "J1846-0651_X_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1846-0651_X_2004_05_08_yyk_map.eps/VPS' loglevs 1*100*3*image_rms/peak_flux ! The new contour levels are: ! -2.00295 2.00295 4.0059 8.01179 16.0236 32.0472 64.0944 print "clev=",int(1*3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.769 x 4.425 at -7.596 degrees (North through East) ! Clean map min=-0.0031903 max=0.099514 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1846-0651_X_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1846-0651_X_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1846-0651_X_2004_05_08_yyk_uvs.log closed on Wed Dec 7 01:10:40 2005