! Started logfile: J1845-2852_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:45:07 2005 obs J1845-2852_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1845-2852_S_2004_05_27_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.858333 visibilities/baseline/integration-bin. ! Found source: J1845-2852 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1386 lines of history. ! ! Reading 1236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1845-2852_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.351763 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.671879Jy sigma=9.638972 ! Fit after self-cal, rms=0.671745Jy sigma=9.636674 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.381 mas, bmaj=6.675 mas, bpa=-2.522 degrees ! Estimated noise=2.0812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.283707 Jy ! Component: 100 - total flux cleaned = 0.325612 Jy ! Total flux subtracted in 100 components = 0.325612 Jy ! Clean residual min=-0.011065 max=0.020845 Jy/beam ! Clean residual mean=-0.000155 rms=0.003601 Jy/beam ! Combined flux in latest and established models = 0.325612 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.325612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103231Jy sigma=1.240863 ! Fit after self-cal, rms=0.103224Jy sigma=1.240712 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.576 mas, bpa=-0.7798 degrees ! Estimated noise=1.49734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225625 Jy ! Component: 100 - total flux cleaned = 0.0311872 Jy ! Component: 150 - total flux cleaned = 0.0326829 Jy ! Component: 200 - total flux cleaned = 0.0333052 Jy ! Total flux subtracted in 200 components = 0.0333052 Jy ! Clean residual min=-0.009600 max=0.011360 Jy/beam ! Clean residual mean=-0.000142 rms=0.002936 Jy/beam ! Combined flux in latest and established models = 0.358917 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.358917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100061Jy sigma=1.183547 ! Fit after self-cal, rms=0.100049Jy sigma=1.183270 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.98789 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.11 KP 0.94 ! LA 1.06 MK 0.99 NL 1.01 OV 0.99 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.994643 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.13 KP 1.00 ! LA 0.94 MK 1.02 NL 1.11 OV 1.03 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.100049Jy sigma=1.183270 ! Fit after self-cal, rms=0.098478Jy sigma=1.138556 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098478Jy sigma=1.138556 ! Fit after self-cal, rms=0.098490Jy sigma=1.138521 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=8.511 mas, bpa=-0.02209 degrees ! Estimated noise=1.48134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000747072 Jy ! Component: 100 - total flux cleaned = -0.000405132 Jy ! Component: 150 - total flux cleaned = -0.000311937 Jy ! Component: 200 - total flux cleaned = -0.0002263 Jy ! Total flux subtracted in 200 components = -0.0002263 Jy ! Clean residual min=-0.007756 max=0.009676 Jy/beam ! Clean residual mean=-0.000022 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.358691 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.358691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098224Jy sigma=1.135101 ! Fit after self-cal, rms=0.098219Jy sigma=1.135029 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098219Jy sigma=1.135029 ! Fit after self-cal, rms=0.096108Jy sigma=1.108713 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492081 Jy ! Component: 100 - total flux cleaned = 0.00064625 Jy ! Component: 150 - total flux cleaned = 0.000713246 Jy ! Component: 200 - total flux cleaned = 0.000840501 Jy ! Total flux subtracted in 200 components = 0.000840501 Jy ! Clean residual min=-0.007881 max=0.009595 Jy/beam ! Clean residual mean=-0.000024 rms=0.002214 Jy/beam ! Combined flux in latest and established models = 0.359531 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 31 components and 0.359531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095987Jy sigma=1.107429 ! Fit after self-cal, rms=0.095830Jy sigma=1.105666 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.157 x 8.511 at -0.02209 degrees (North through East) ! Clean map min=-0.0075066 max=0.32748 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095830Jy sigma=1.105666 ! Fit after self-cal, rms=0.093483Jy sigma=1.063363 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093483Jy sigma=1.063363 ! Fit after self-cal, rms=0.093474Jy sigma=1.063109 ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.501 mas, bpa=0.1786 degrees ! Estimated noise=1.47885 mJy/beam. ! Added new window around map position (-35, 26.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505709 Jy ! Component: 100 - total flux cleaned = 0.0056698 Jy ! Component: 150 - total flux cleaned = 0.00579418 Jy ! Component: 200 - total flux cleaned = 0.00566963 Jy ! Total flux subtracted in 200 components = 0.00566963 Jy ! Clean residual min=-0.006006 max=0.005918 Jy/beam ! Clean residual mean=-0.000000 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 0.365201 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 57 components and 0.365201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092735Jy sigma=1.050048 ! Fit after self-cal, rms=0.092723Jy sigma=1.049094 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092723Jy sigma=1.049094 ! Fit after self-cal, rms=0.092084Jy sigma=1.029574 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092084Jy sigma=1.029574 ! Fit after self-cal, rms=0.092083Jy sigma=1.029542 ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=8.463 mas, bpa=0.2178 degrees ! Estimated noise=1.48719 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439997 Jy ! Component: 100 - total flux cleaned = 0.00455723 Jy ! Component: 150 - total flux cleaned = 0.00480524 Jy ! Component: 200 - total flux cleaned = 0.00491134 Jy ! Total flux subtracted in 200 components = 0.00491134 Jy ! Clean residual min=-0.005301 max=0.005790 Jy/beam ! Clean residual mean=-0.000088 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.370112 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.370112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091714Jy sigma=1.023879 ! Fit after self-cal, rms=0.091700Jy sigma=1.023645 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.307 mas, bmaj=22.93 mas, bpa=3.234 degrees ! Estimated noise=1.89939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295553 Jy ! Component: 100 - total flux cleaned = 7.08051e-05 Jy ! Component: 150 - total flux cleaned = -3.30879e-05 Jy ! Component: 200 - total flux cleaned = -0.000220767 Jy ! Total flux subtracted in 200 components = -0.000220767 Jy ! Clean residual min=-0.006068 max=0.006867 Jy/beam ! Clean residual mean=-0.000149 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.369891 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.369891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091600Jy sigma=1.022453 ! Fit after self-cal, rms=0.091585Jy sigma=1.022316 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=6.626 mas, bpa=-2.065 degrees ! Estimated noise=2.08764 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.28495 Jy ! Component: 100 - total flux cleaned = 0.328239 Jy ! Component: 150 - total flux cleaned = 0.347809 Jy ! Component: 200 - total flux cleaned = 0.357932 Jy ! Total flux subtracted in 200 components = 0.357932 Jy ! Clean residual min=-0.009612 max=0.009381 Jy/beam ! Clean residual mean=-0.000125 rms=0.002672 Jy/beam ! Combined flux in latest and established models = 0.357932 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.357932 Jy ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=8.463 mas, bpa=0.2178 degrees ! Estimated noise=1.48719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618455 Jy ! Component: 100 - total flux cleaned = 0.0083266 Jy ! Component: 150 - total flux cleaned = 0.00959175 Jy ! Component: 200 - total flux cleaned = 0.0098502 Jy ! Total flux subtracted in 200 components = 0.00985019 Jy ! Clean residual min=-0.005540 max=0.005946 Jy/beam ! Clean residual mean=-0.000093 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 0.367782 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 63 components and 0.367782 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.307 mas, bmaj=22.93 mas, bpa=3.234 degrees ! Estimated noise=1.89939 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022606 Jy ! Component: 100 - total flux cleaned = 0.00200426 Jy ! Component: 150 - total flux cleaned = 0.00188889 Jy ! Component: 200 - total flux cleaned = 0.00167209 Jy ! Total flux subtracted in 200 components = 0.00167209 Jy ! Clean residual min=-0.005929 max=0.007038 Jy/beam ! Clean residual mean=-0.000152 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.369454 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.369454 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=8.463 mas, bpa=0.2178 degrees ! Estimated noise=1.48719 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011654 Jy ! Component: 100 - total flux cleaned = -0.00165246 Jy ! Component: 150 - total flux cleaned = -0.00210001 Jy ! Component: 200 - total flux cleaned = -0.00230514 Jy ! Total flux subtracted in 200 components = -0.00230514 Jy ! Clean residual min=-0.005361 max=0.005604 Jy/beam ! Clean residual mean=-0.000083 rms=0.001595 Jy/beam ! Combined flux in latest and established models = 0.367149 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.367149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091783Jy sigma=1.023662 ! Fit after self-cal, rms=0.091761Jy sigma=1.023389 wmodel J1845-2852_S_2004_05_27_yyk\_map.mod ! Writing 90 model components to file: J1845-2852_S_2004_05_27_yyk_map.mod wobs J1845-2852_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1845-2852_S_2004_05_27_yyk_uvs.fits wwins J1845-2852_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J1845-2852_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000567411 Jy ! Component: 100 - total flux cleaned = -0.00207012 Jy ! Component: 150 - total flux cleaned = -0.00342737 Jy ! Component: 200 - total flux cleaned = -0.00473889 Jy ! Component: 250 - total flux cleaned = -0.00600849 Jy ! Component: 300 - total flux cleaned = -0.00716619 Jy ! Component: 350 - total flux cleaned = -0.00814295 Jy ! Component: 400 - total flux cleaned = -0.00902243 Jy ! Component: 450 - total flux cleaned = -0.00966718 Jy ! Component: 500 - total flux cleaned = -0.0102986 Jy ! Component: 550 - total flux cleaned = -0.0109851 Jy ! Component: 600 - total flux cleaned = -0.0115909 Jy ! Component: 650 - total flux cleaned = -0.0124476 Jy ! Component: 700 - total flux cleaned = -0.0130291 Jy ! Component: 750 - total flux cleaned = -0.0139174 Jy ! Component: 800 - total flux cleaned = -0.0146667 Jy ! Component: 850 - total flux cleaned = -0.015526 Jy ! Component: 900 - total flux cleaned = -0.0161905 Jy ! Component: 950 - total flux cleaned = -0.0166063 Jy ! Component: 1000 - total flux cleaned = -0.0171329 Jy ! Component: 1050 - total flux cleaned = -0.0175362 Jy ! Component: 1100 - total flux cleaned = -0.0179909 Jy ! Component: 1150 - total flux cleaned = -0.0184385 Jy ! Component: 1200 - total flux cleaned = -0.0188812 Jy ! Component: 1250 - total flux cleaned = -0.0192107 Jy ! Component: 1300 - total flux cleaned = -0.0198055 Jy ! Component: 1350 - total flux cleaned = -0.0200727 Jy ! Component: 1400 - total flux cleaned = -0.0206007 Jy ! Component: 1450 - total flux cleaned = -0.0210192 Jy ! Component: 1500 - total flux cleaned = -0.0214841 Jy ! Component: 1550 - total flux cleaned = -0.0218933 Jy ! Component: 1600 - total flux cleaned = -0.022499 Jy ! Component: 1650 - total flux cleaned = -0.0227491 Jy ! Component: 1700 - total flux cleaned = -0.0231946 Jy ! Component: 1750 - total flux cleaned = -0.0234397 Jy ! Component: 1800 - total flux cleaned = -0.0238761 Jy ! Component: 1850 - total flux cleaned = -0.0241166 Jy ! Component: 1900 - total flux cleaned = -0.0244981 Jy ! Component: 1950 - total flux cleaned = -0.024781 Jy ! Component: 2000 - total flux cleaned = -0.0250147 Jy ! Total flux subtracted in 2048 components = -0.0252934 Jy ! Clean residual min=-0.002474 max=0.002472 Jy/beam ! Clean residual mean=-0.000045 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.341856 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 226 components and 0.341856 Jy ![Exited script file: muppet] wmap "J1845-2852_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.132 x 8.463 at 0.2178 degrees (North through East) ! Clean map min=-0.0078247 max=0.33253 Jy/beam ! Writing clean map to FITS file: J1845-2852_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.332534 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000956935 device "J1845-2852_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1845-2852_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.86331 0.86331 1.72662 3.45324 6.90648 13.813 27.6259 55.2519 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.332 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.132 x 8.463 at 0.2178 degrees (North through East) ! Clean map min=-0.0078247 max=0.33253 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1845-2852_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1845-2852_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1845-2852_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:45:11 2005