! Started logfile: J1844-1324_S_2004_05_27_yyk_uvs.log on Wed Dec  7 01:04:45 2005
obs J1844-1324_S_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J1844-1324_S_2004_05_27_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.50963 visibilities/baseline/integration-bin.
! Found source: J1844-1324
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1392 lines of history.
! 
! Reading 1376 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1844-1324_S_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.101884 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.936622Jy  sigma=17.801497
! Fit after  self-cal, rms=0.928269Jy  sigma=17.642015
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.96 mas, bmaj=15.97 mas, bpa=8.148 degrees
! Estimated noise=1.57137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0634338 Jy
! Component: 100  -  total flux cleaned = 0.0778652 Jy
! Total flux subtracted in 100 components = 0.0778652 Jy
! Clean residual min=-0.005139 max=0.004873 Jy/beam
! Clean residual mean=0.000001 rms=0.001678 Jy/beam
! Combined flux in latest and established models = 0.0778652 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0778652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068821Jy  sigma=1.108022
! Fit after  self-cal, rms=0.068808Jy  sigma=1.107599
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.386 mas, bmaj=18.4 mas, bpa=14.83 degrees
! Estimated noise=1.20641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00747643 Jy
! Component: 100  -  total flux cleaned = 0.0108228 Jy
! Component: 150  -  total flux cleaned = 0.0123507 Jy
! Component: 200  -  total flux cleaned = 0.0129059 Jy
! Total flux subtracted in 200 components = 0.0129059 Jy
! Clean residual min=-0.004758 max=0.003698 Jy/beam
! Clean residual mean=-0.000048 rms=0.001401 Jy/beam
! Combined flux in latest and established models = 0.0907711 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 44 components and 0.0907711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068443Jy  sigma=1.095165
! Fit after  self-cal, rms=0.068442Jy  sigma=1.095037
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.01075
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.98     HN        1.00*    KP        1.02     
!   LA        1.09     MK        1.00*    NL        0.90     OV        1.04     
!   PT        0.98     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.977311
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     HN        1.00*    KP        1.02     
!   LA        1.06     MK        1.00*    NL        1.02     OV        1.10     
!   PT        0.98     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00565
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.84     HN        1.00*    KP        1.07     
!   LA        0.92     MK        1.00*    NL        0.95     OV        0.98     
!   PT        1.03     SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.068442Jy  sigma=1.095037
! Fit after  self-cal, rms=0.068413Jy  sigma=1.087947
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068413Jy  sigma=1.087947
! Fit after  self-cal, rms=0.068398Jy  sigma=1.087893
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.329 mas, bmaj=18.11 mas, bpa=13.87 degrees
! Estimated noise=1.20108 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000861513 Jy
! Component: 100  -  total flux cleaned = 0.00111557 Jy
! Component: 150  -  total flux cleaned = 0.00132327 Jy
! Component: 200  -  total flux cleaned = 0.00152796 Jy
! Total flux subtracted in 200 components = 0.00152796 Jy
! Clean residual min=-0.004598 max=0.002905 Jy/beam
! Clean residual mean=-0.000038 rms=0.001224 Jy/beam
! Combined flux in latest and established models = 0.092299 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.092299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068361Jy  sigma=1.087073
! Fit after  self-cal, rms=0.068372Jy  sigma=1.087008
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068372Jy  sigma=1.087008
! Fit after  self-cal, rms=0.060239Jy  sigma=0.962512
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00392376 Jy
! Component: 100  -  total flux cleaned = 0.00499361 Jy
! Component: 150  -  total flux cleaned = 0.00512773 Jy
! Component: 200  -  total flux cleaned = 0.00517302 Jy
! Total flux subtracted in 200 components = 0.00517302 Jy
! Clean residual min=-0.004599 max=0.003151 Jy/beam
! Clean residual mean=-0.000066 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.097472 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.097472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059997Jy  sigma=0.958424
! Fit after  self-cal, rms=0.059463Jy  sigma=0.950856
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.329 x 18.11 at 13.87 degrees (North through East)
! Clean map  min=-0.0045303  max=0.079625 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.62 mas, bmaj=19.67 mas, bpa=14.21 degrees
! Estimated noise=1.22588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000668283 Jy
! Component: 100  -  total flux cleaned = 0.000726427 Jy
! Component: 150  -  total flux cleaned = 0.000766149 Jy
! Component: 200  -  total flux cleaned = 0.000802466 Jy
! Total flux subtracted in 200 components = 0.000802466 Jy
! Clean residual min=-0.004483 max=0.003148 Jy/beam
! Clean residual mean=-0.000085 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.0982745 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 78 components and 0.0982745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059457Jy  sigma=0.950716
! Fit after  self-cal, rms=0.059411Jy  sigma=0.949948
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.953 mas, bmaj=15.9 mas, bpa=7.695 degrees
! Estimated noise=1.5536 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0678437 Jy
! Component: 100  -  total flux cleaned = 0.0829226 Jy
! Component: 150  -  total flux cleaned = 0.0894639 Jy
! Component: 200  -  total flux cleaned = 0.0928709 Jy
! Total flux subtracted in 200 components = 0.0928709 Jy
! Clean residual min=-0.004086 max=0.003490 Jy/beam
! Clean residual mean=-0.000045 rms=0.001199 Jy/beam
! Combined flux in latest and established models = 0.0928709 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0928709 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.329 mas, bmaj=18.11 mas, bpa=13.87 degrees
! Estimated noise=1.20108 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286781 Jy
! Component: 100  -  total flux cleaned = 0.00419106 Jy
! Component: 150  -  total flux cleaned = 0.00460719 Jy
! Component: 200  -  total flux cleaned = 0.00481071 Jy
! Total flux subtracted in 200 components = 0.00481071 Jy
! Clean residual min=-0.004653 max=0.003120 Jy/beam
! Clean residual mean=-0.000062 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.0976816 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 54 components and 0.0976816 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.62 mas, bmaj=19.67 mas, bpa=14.21 degrees
! Estimated noise=1.22588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258669 Jy
! Component: 100  -  total flux cleaned = 0.000322575 Jy
! Component: 150  -  total flux cleaned = 0.000380508 Jy
! Component: 200  -  total flux cleaned = 0.000451444 Jy
! Total flux subtracted in 200 components = 0.000451444 Jy
! Clean residual min=-0.004510 max=0.003151 Jy/beam
! Clean residual mean=-0.000082 rms=0.001174 Jy/beam
! Combined flux in latest and established models = 0.0981331 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 0.0981331 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.329 mas, bmaj=18.11 mas, bpa=13.87 degrees
! Estimated noise=1.20108 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -4.62458e-06 Jy
! Component: 100  -  total flux cleaned = 4.67621e-05 Jy
! Component: 150  -  total flux cleaned = 9.24057e-05 Jy
! Component: 200  -  total flux cleaned = 0.000120819 Jy
! Total flux subtracted in 200 components = 0.000120819 Jy
! Clean residual min=-0.004609 max=0.003125 Jy/beam
! Clean residual mean=-0.000068 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.0982539 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.0982539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059374Jy  sigma=0.949592
! Fit after  self-cal, rms=0.059370Jy  sigma=0.949434
wmodel J1844-1324_S_2004_05_27_yyk\_map.mod
! Writing 73 model components to file: J1844-1324_S_2004_05_27_yyk_map.mod
wobs J1844-1324_S_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J1844-1324_S_2004_05_27_yyk_uvs.fits
wwins J1844-1324_S_2004_05_27_yyk\_map.win
! wwins: Wrote 1 windows to J1844-1324_S_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00195247 Jy
! Component: 100  -  total flux cleaned = -0.0031934 Jy
! Component: 150  -  total flux cleaned = -0.00391807 Jy
! Component: 200  -  total flux cleaned = -0.00453024 Jy
! Component: 250  -  total flux cleaned = -0.00485174 Jy
! Component: 300  -  total flux cleaned = -0.0052321 Jy
! Component: 350  -  total flux cleaned = -0.00556011 Jy
! Component: 400  -  total flux cleaned = -0.00601734 Jy
! Component: 450  -  total flux cleaned = -0.00649292 Jy
! Component: 500  -  total flux cleaned = -0.00691944 Jy
! Component: 550  -  total flux cleaned = -0.00730023 Jy
! Component: 600  -  total flux cleaned = -0.0076688 Jy
! Component: 650  -  total flux cleaned = -0.00808492 Jy
! Component: 700  -  total flux cleaned = -0.00840198 Jy
! Component: 750  -  total flux cleaned = -0.00873662 Jy
! Component: 800  -  total flux cleaned = -0.0089259 Jy
! Component: 850  -  total flux cleaned = -0.00903144 Jy
! Component: 900  -  total flux cleaned = -0.00923686 Jy
! Component: 950  -  total flux cleaned = -0.00941224 Jy
! Component: 1000  -  total flux cleaned = -0.00955885 Jy
! Total flux subtracted in 1024 components = -0.00960719 Jy
! Clean residual min=-0.001702 max=0.001398 Jy/beam
! Clean residual mean=-0.000074 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.0886467 Jy
keep
! Adding 63 model components to the UV plane model.
! The established model now contains 136 components and 0.0886467 Jy
![Exited script file: muppet]
wmap "J1844-1324_S_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.329 x 18.11 at 13.87 degrees (North through East)
! Clean map  min=-0.0033156  max=0.079536 Jy/beam
! Writing clean map to FITS file: J1844-1324_S_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0795357 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000543083 
device "J1844-1324_S_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J1844-1324_S_2004_05_27_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.04845 2.04845 4.0969 8.1938 16.3876 32.7752 65.5504
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.079 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.329 x 18.11 at 13.87 degrees (North through East)
! Clean map  min=-0.0033156  max=0.079536 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1844-1324_S_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J1844-1324_S_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1844-1324_S_2004_05_27_yyk_uvs.log closed on Wed Dec  7 01:04:46 2005