! Started logfile: J1826-3650_X_2004_05_27_yyk_uvs.log on Wed Dec 7 01:09:51 2005 obs J1826-3650_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1826-3650_X_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777778 visibilities/baseline/integration-bin. ! Found source: J1826-3650 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1387 lines of history. ! ! Reading 560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1826-3650_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.287022 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.738941Jy sigma=11.757388 ! Fit after self-cal, rms=0.738676Jy sigma=11.749815 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6228 mas, bmaj=1.802 mas, bpa=0.5739 degrees ! Estimated noise=2.9837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.216524 Jy ! Component: 100 - total flux cleaned = 0.273671 Jy ! Total flux subtracted in 100 components = 0.273671 Jy ! Clean residual min=-0.018250 max=0.025143 Jy/beam ! Clean residual mean=-0.000142 rms=0.005776 Jy/beam ! Combined flux in latest and established models = 0.273671 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.273671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089823Jy sigma=1.390721 ! Fit after self-cal, rms=0.089671Jy sigma=1.388832 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7794 mas, bmaj=2.089 mas, bpa=-0.2923 degrees ! Estimated noise=2.35569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430037 Jy ! Component: 100 - total flux cleaned = 0.0575841 Jy ! Component: 150 - total flux cleaned = 0.0625476 Jy ! Component: 200 - total flux cleaned = 0.063773 Jy ! Total flux subtracted in 200 components = 0.063773 Jy ! Clean residual min=-0.016410 max=0.020124 Jy/beam ! Clean residual mean=-0.000081 rms=0.004609 Jy/beam ! Combined flux in latest and established models = 0.337444 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.337444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081501Jy sigma=1.160576 ! Fit after self-cal, rms=0.081470Jy sigma=1.159517 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.999311 ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.94 HN 1.00* KP 0.97 ! LA 0.98 MK 0.94 NL 1.00* OV 1.10 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.081470Jy sigma=1.159517 ! Fit after self-cal, rms=0.076024Jy sigma=1.133701 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076024Jy sigma=1.133701 ! Fit after self-cal, rms=0.076031Jy sigma=1.133510 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7832 mas, bmaj=2.097 mas, bpa=-0.8141 degrees ! Estimated noise=2.33839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00341429 Jy ! Component: 100 - total flux cleaned = -0.00333155 Jy ! Component: 150 - total flux cleaned = -0.00326636 Jy ! Component: 200 - total flux cleaned = -0.00320562 Jy ! Total flux subtracted in 200 components = -0.00320562 Jy ! Clean residual min=-0.015158 max=0.018156 Jy/beam ! Clean residual mean=-0.000042 rms=0.004097 Jy/beam ! Combined flux in latest and established models = 0.334238 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.334238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075673Jy sigma=1.130225 ! Fit after self-cal, rms=0.075677Jy sigma=1.130072 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075677Jy sigma=1.130072 ! Fit after self-cal, rms=0.073918Jy sigma=1.099498 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519796 Jy ! Component: 100 - total flux cleaned = 0.000578714 Jy ! Component: 150 - total flux cleaned = 0.000578647 Jy ! Component: 200 - total flux cleaned = 0.000574131 Jy ! Total flux subtracted in 200 components = 0.000574131 Jy ! Clean residual min=-0.015121 max=0.017801 Jy/beam ! Clean residual mean=-0.000037 rms=0.004052 Jy/beam ! Combined flux in latest and established models = 0.334812 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.334813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073898Jy sigma=1.098384 ! Fit after self-cal, rms=0.073840Jy sigma=1.096725 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7832 x 2.097 at -0.8141 degrees (North through East) ! Clean map min=-0.014139 max=0.26459 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073840Jy sigma=1.096725 ! Fit after self-cal, rms=0.073693Jy sigma=1.096340 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073693Jy sigma=1.096340 ! Fit after self-cal, rms=0.073696Jy sigma=1.096239 ! Inverting map and beam ! Estimated beam: bmin=0.7836 mas, bmaj=2.095 mas, bpa=-1.017 degrees ! Estimated noise=2.33328 mJy/beam. ! Added new window around map position (3.4, -1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165785 Jy ! Component: 100 - total flux cleaned = 0.0163737 Jy ! Component: 150 - total flux cleaned = 0.01636 Jy ! Component: 200 - total flux cleaned = 0.0165218 Jy ! Total flux subtracted in 200 components = 0.0165218 Jy ! Clean residual min=-0.013476 max=0.011269 Jy/beam ! Clean residual mean=0.000066 rms=0.003331 Jy/beam ! Combined flux in latest and established models = 0.351334 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.351334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071000Jy sigma=1.045211 ! Fit after self-cal, rms=0.070916Jy sigma=1.041672 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070916Jy sigma=1.041672 ! Fit after self-cal, rms=0.067932Jy sigma=1.000730 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067932Jy sigma=1.000730 ! Fit after self-cal, rms=0.067954Jy sigma=1.000650 ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=2.1 mas, bpa=-0.03337 degrees ! Estimated noise=2.27931 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720023 Jy ! Component: 100 - total flux cleaned = 4.81942e-05 Jy ! Component: 150 - total flux cleaned = -0.000509562 Jy ! Component: 200 - total flux cleaned = -0.000986816 Jy ! Total flux subtracted in 200 components = -0.000986816 Jy ! Clean residual min=-0.011842 max=0.009730 Jy/beam ! Clean residual mean=-0.000002 rms=0.002539 Jy/beam ! Combined flux in latest and established models = 0.350347 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.350347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067086Jy sigma=0.989209 ! Fit after self-cal, rms=0.067111Jy sigma=0.987662 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=9.82 mas, bpa=1.838 degrees ! Estimated noise=3.06258 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014252 Jy ! Component: 100 - total flux cleaned = 0.00100338 Jy ! Component: 150 - total flux cleaned = 0.00100274 Jy ! Component: 200 - total flux cleaned = 0.00100359 Jy ! Total flux subtracted in 200 components = 0.00100359 Jy ! Clean residual min=-0.010372 max=0.009837 Jy/beam ! Clean residual mean=-0.000000 rms=0.003148 Jy/beam ! Combined flux in latest and established models = 0.351351 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.351351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066935Jy sigma=0.985875 ! Fit after self-cal, rms=0.066949Jy sigma=0.985505 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6228 mas, bmaj=1.789 mas, bpa=-0.0135 degrees ! Estimated noise=2.91362 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.211454 Jy ! Component: 100 - total flux cleaned = 0.269338 Jy ! Component: 150 - total flux cleaned = 0.300506 Jy ! Component: 200 - total flux cleaned = 0.318714 Jy ! Total flux subtracted in 200 components = 0.318714 Jy ! Clean residual min=-0.014562 max=0.013521 Jy/beam ! Clean residual mean=-0.000059 rms=0.003759 Jy/beam ! Combined flux in latest and established models = 0.318714 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.318714 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=2.1 mas, bpa=-0.03337 degrees ! Estimated noise=2.27931 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -24.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201666 Jy ! Component: 100 - total flux cleaned = 0.0301754 Jy ! Component: 150 - total flux cleaned = 0.0351599 Jy ! Component: 200 - total flux cleaned = 0.0367478 Jy ! Total flux subtracted in 200 components = 0.0367478 Jy ! Clean residual min=-0.009392 max=0.008021 Jy/beam ! Clean residual mean=0.000028 rms=0.002225 Jy/beam ! Combined flux in latest and established models = 0.355462 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 54 components and 0.355462 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=9.82 mas, bpa=1.838 degrees ! Estimated noise=3.06258 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342321 Jy ! Component: 100 - total flux cleaned = 0.0037631 Jy ! Component: 150 - total flux cleaned = 0.00368037 Jy ! Component: 200 - total flux cleaned = 0.00376275 Jy ! Total flux subtracted in 200 components = 0.00376275 Jy ! Clean residual min=-0.007409 max=0.005773 Jy/beam ! Clean residual mean=0.000070 rms=0.002418 Jy/beam ! Combined flux in latest and established models = 0.359225 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 58 components and 0.359225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7775 mas, bmaj=2.1 mas, bpa=-0.03337 degrees ! Estimated noise=2.27931 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000966038 Jy ! Component: 100 - total flux cleaned = -0.00107452 Jy ! Component: 150 - total flux cleaned = -0.00126548 Jy ! Component: 200 - total flux cleaned = -0.00126286 Jy ! Total flux subtracted in 200 components = -0.00126286 Jy ! Clean residual min=-0.009521 max=0.007742 Jy/beam ! Clean residual mean=0.000035 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.357962 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.357962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065468Jy sigma=0.959919 ! Fit after self-cal, rms=0.065263Jy sigma=0.956001 wmodel J1826-3650_X_2004_05_27_yyk\_map.mod ! Writing 75 model components to file: J1826-3650_X_2004_05_27_yyk_map.mod wobs J1826-3650_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1826-3650_X_2004_05_27_yyk_uvs.fits wwins J1826-3650_X_2004_05_27_yyk\_map.win ! wwins: Wrote 3 windows to J1826-3650_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0036048 Jy ! Component: 100 - total flux cleaned = -0.00460366 Jy ! Component: 150 - total flux cleaned = -0.00472007 Jy ! Component: 200 - total flux cleaned = -0.00422869 Jy ! Component: 250 - total flux cleaned = -0.00359868 Jy ! Component: 300 - total flux cleaned = -0.002603 Jy ! Component: 350 - total flux cleaned = -0.00166919 Jy ! Component: 400 - total flux cleaned = -0.00137455 Jy ! Component: 450 - total flux cleaned = -0.00109256 Jy ! Component: 500 - total flux cleaned = -0.000889563 Jy ! Component: 550 - total flux cleaned = -0.000630049 Jy ! Component: 600 - total flux cleaned = -0.000508158 Jy ! Component: 650 - total flux cleaned = -0.000207854 Jy ! Component: 700 - total flux cleaned = 0.000139151 Jy ! Component: 750 - total flux cleaned = 0.000532328 Jy ! Component: 800 - total flux cleaned = 0.00085935 Jy ! Component: 850 - total flux cleaned = 0.00117757 Jy ! Component: 900 - total flux cleaned = 0.00148693 Jy ! Component: 950 - total flux cleaned = 0.00183871 Jy ! Component: 1000 - total flux cleaned = 0.00218199 Jy ! Component: 1050 - total flux cleaned = 0.00232572 Jy ! Component: 1100 - total flux cleaned = 0.00237278 Jy ! Component: 1150 - total flux cleaned = 0.00241924 Jy ! Component: 1200 - total flux cleaned = 0.00259928 Jy ! Component: 1250 - total flux cleaned = 0.00264324 Jy ! Component: 1300 - total flux cleaned = 0.00277358 Jy ! Component: 1350 - total flux cleaned = 0.00281586 Jy ! Component: 1400 - total flux cleaned = 0.00281539 Jy ! Component: 1450 - total flux cleaned = 0.00281537 Jy ! Component: 1500 - total flux cleaned = 0.00281552 Jy ! Component: 1550 - total flux cleaned = 0.00285464 Jy ! Component: 1600 - total flux cleaned = 0.00281477 Jy ! Component: 1650 - total flux cleaned = 0.00289281 Jy ! Component: 1700 - total flux cleaned = 0.00293156 Jy ! Component: 1750 - total flux cleaned = 0.00289315 Jy ! Component: 1800 - total flux cleaned = 0.00300714 Jy ! Component: 1850 - total flux cleaned = 0.00319508 Jy ! Component: 1900 - total flux cleaned = 0.00319524 Jy ! Component: 1950 - total flux cleaned = 0.00341753 Jy ! Component: 2000 - total flux cleaned = 0.00341789 Jy ! Total flux subtracted in 2048 components = 0.00356465 Jy ! Clean residual min=-0.001899 max=0.002152 Jy/beam ! Clean residual mean=0.000011 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.361527 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 191 components and 0.361527 Jy ![Exited script file: muppet] wmap "J1826-3650_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7775 x 2.1 at -0.03337 degrees (North through East) ! Clean map min=-0.0049149 max=0.25069 Jy/beam ! Writing clean map to FITS file: J1826-3650_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.250693 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000696339 device "J1826-3650_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1826-3650_X_2004_05_27_yyk_map.eps/VPS' loglevs 2*100*3*image_rms/peak_flux ! The new contour levels are: ! -1.6666 1.6666 3.33319 6.66639 13.3328 26.6655 53.3311 print "clev=",int(2*3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.25 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7775 x 2.1 at -0.03337 degrees (North through East) ! Clean map min=-0.0049149 max=0.25069 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1826-3650_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1826-3650_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1826-3650_X_2004_05_27_yyk_uvs.log closed on Wed Dec 7 01:09:55 2005