! Started logfile: J1826-3650_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:44:10 2005 obs J1826-3650_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1826-3650_S_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.733333 visibilities/baseline/integration-bin. ! Found source: J1826-3650 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1387 lines of history. ! ! Reading 528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1826-3650_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.30988 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.724645Jy sigma=9.544314 ! Fit after self-cal, rms=0.724371Jy sigma=9.539485 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.459 mas, bmaj=6.728 mas, bpa=-5.034 degrees ! Estimated noise=3.89193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.237721 Jy ! Component: 100 - total flux cleaned = 0.295125 Jy ! Total flux subtracted in 100 components = 0.295125 Jy ! Clean residual min=-0.021133 max=0.026429 Jy/beam ! Clean residual mean=0.000068 rms=0.006507 Jy/beam ! Combined flux in latest and established models = 0.295125 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.295125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104071Jy sigma=1.214983 ! Fit after self-cal, rms=0.104099Jy sigma=1.214828 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=8.091 mas, bpa=-2.91 degrees ! Estimated noise=3.00776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257065 Jy ! Component: 100 - total flux cleaned = 0.0338647 Jy ! Component: 150 - total flux cleaned = 0.0361844 Jy ! Component: 200 - total flux cleaned = 0.036325 Jy ! Total flux subtracted in 200 components = 0.036325 Jy ! Clean residual min=-0.016891 max=0.023040 Jy/beam ! Clean residual mean=-0.000023 rms=0.005741 Jy/beam ! Combined flux in latest and established models = 0.33145 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.33145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099711Jy sigma=1.156339 ! Fit after self-cal, rms=0.099728Jy sigma=1.156305 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01056 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.00* KP 0.94 ! LA 1.01 MK 0.88 NL 1.10 OV 0.90 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993386 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.00* KP 0.95 ! LA 0.98 MK 1.10 NL 1.15 OV 0.96 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.099728Jy sigma=1.156305 ! Fit after self-cal, rms=0.099816Jy sigma=1.118163 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099816Jy sigma=1.118163 ! Fit after self-cal, rms=0.099812Jy sigma=1.118118 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=8.035 mas, bpa=-2.067 degrees ! Estimated noise=2.95617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00287012 Jy ! Component: 100 - total flux cleaned = -0.00286777 Jy ! Component: 150 - total flux cleaned = -0.00286773 Jy ! Component: 200 - total flux cleaned = -0.00279127 Jy ! Total flux subtracted in 200 components = -0.00279127 Jy ! Clean residual min=-0.012404 max=0.018281 Jy/beam ! Clean residual mean=-0.000050 rms=0.004624 Jy/beam ! Combined flux in latest and established models = 0.328658 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.328658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099681Jy sigma=1.114533 ! Fit after self-cal, rms=0.099679Jy sigma=1.114488 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099679Jy sigma=1.114488 ! Fit after self-cal, rms=0.097267Jy sigma=1.088861 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552252 Jy ! Component: 100 - total flux cleaned = 0.000663788 Jy ! Component: 150 - total flux cleaned = 0.000713525 Jy ! Component: 200 - total flux cleaned = 0.000713068 Jy ! Total flux subtracted in 200 components = 0.000713068 Jy ! Clean residual min=-0.012315 max=0.018460 Jy/beam ! Clean residual mean=-0.000047 rms=0.004609 Jy/beam ! Combined flux in latest and established models = 0.329371 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.329371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097160Jy sigma=1.088271 ! Fit after self-cal, rms=0.096533Jy sigma=1.085876 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.056 x 8.035 at -2.067 degrees (North through East) ! Clean map min=-0.01178 max=0.2802 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096533Jy sigma=1.085876 ! Fit after self-cal, rms=0.095625Jy sigma=1.082284 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095625Jy sigma=1.082284 ! Fit after self-cal, rms=0.095345Jy sigma=1.081589 ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.013 mas, bpa=-1.459 degrees ! Estimated noise=2.92172 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00281193 Jy ! Component: 100 - total flux cleaned = -0.00282012 Jy ! Component: 150 - total flux cleaned = -0.00275644 Jy ! Component: 200 - total flux cleaned = -0.00265606 Jy ! Total flux subtracted in 200 components = -0.00265606 Jy ! Clean residual min=-0.011839 max=0.017826 Jy/beam ! Clean residual mean=-0.000045 rms=0.004443 Jy/beam ! Combined flux in latest and established models = 0.326715 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.326715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095319Jy sigma=1.079334 ! Fit after self-cal, rms=0.095126Jy sigma=1.078928 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095126Jy sigma=1.078928 ! Fit after self-cal, rms=0.094315Jy sigma=1.079888 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094315Jy sigma=1.079888 ! Fit after self-cal, rms=0.094213Jy sigma=1.079654 ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=7.935 mas, bpa=-2.49 degrees ! Estimated noise=2.88402 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150038 Jy ! Component: 100 - total flux cleaned = -0.00160322 Jy ! Component: 150 - total flux cleaned = -0.00159969 Jy ! Component: 200 - total flux cleaned = -0.00164971 Jy ! Total flux subtracted in 200 components = -0.00164971 Jy ! Clean residual min=-0.012338 max=0.017816 Jy/beam ! Clean residual mean=-0.000084 rms=0.004275 Jy/beam ! Combined flux in latest and established models = 0.325066 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.325066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094347Jy sigma=1.077191 ! Fit after self-cal, rms=0.094289Jy sigma=1.077033 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.185 mas, bmaj=28.02 mas, bpa=-0.09001 degrees ! Estimated noise=3.7757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -9.58721e-06 Jy ! Component: 100 - total flux cleaned = 7.34656e-05 Jy ! Component: 150 - total flux cleaned = 0.000155371 Jy ! Component: 200 - total flux cleaned = 0.000230816 Jy ! Total flux subtracted in 200 components = 0.000230816 Jy ! Clean residual min=-0.011306 max=0.017669 Jy/beam ! Clean residual mean=-0.000115 rms=0.005692 Jy/beam ! Combined flux in latest and established models = 0.325296 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 73 components and 0.325296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094250Jy sigma=1.078493 ! Fit after self-cal, rms=0.094232Jy sigma=1.078024 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.433 mas, bmaj=6.693 mas, bpa=-4.739 degrees ! Estimated noise=3.75767 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.230617 Jy ! Component: 100 - total flux cleaned = 0.288201 Jy ! Component: 150 - total flux cleaned = 0.310828 Jy ! Component: 200 - total flux cleaned = 0.320978 Jy ! Total flux subtracted in 200 components = 0.320978 Jy ! Clean residual min=-0.017765 max=0.022096 Jy/beam ! Clean residual mean=-0.000014 rms=0.005407 Jy/beam ! Combined flux in latest and established models = 0.320978 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.320978 Jy ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=7.935 mas, bpa=-2.49 degrees ! Estimated noise=2.88402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464431 Jy ! Component: 100 - total flux cleaned = 0.00483511 Jy ! Component: 150 - total flux cleaned = 0.00491316 Jy ! Component: 200 - total flux cleaned = 0.0050524 Jy ! Total flux subtracted in 200 components = 0.0050524 Jy ! Clean residual min=-0.012098 max=0.018062 Jy/beam ! Clean residual mean=-0.000085 rms=0.004307 Jy/beam ! Combined flux in latest and established models = 0.326031 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.326031 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.185 mas, bmaj=28.02 mas, bpa=-0.09001 degrees ! Estimated noise=3.7757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143947 Jy ! Component: 100 - total flux cleaned = -3.66419e-05 Jy ! Component: 150 - total flux cleaned = 6.86454e-05 Jy ! Component: 200 - total flux cleaned = 0.000161443 Jy ! Total flux subtracted in 200 components = 0.000161443 Jy ! Clean residual min=-0.011096 max=0.017725 Jy/beam ! Clean residual mean=-0.000118 rms=0.005726 Jy/beam ! Combined flux in latest and established models = 0.326192 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.326192 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=7.935 mas, bpa=-2.49 degrees ! Estimated noise=2.88402 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125042 Jy ! Component: 100 - total flux cleaned = -0.000202571 Jy ! Component: 150 - total flux cleaned = -0.000273177 Jy ! Component: 200 - total flux cleaned = -0.000393939 Jy ! Total flux subtracted in 200 components = -0.000393939 Jy ! Clean residual min=-0.012058 max=0.018057 Jy/beam ! Clean residual mean=-0.000084 rms=0.004296 Jy/beam ! Combined flux in latest and established models = 0.325798 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.325798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094423Jy sigma=1.079112 ! Fit after self-cal, rms=0.094433Jy sigma=1.079034 wmodel J1826-3650_S_2004_05_27_yyk\_map.mod ! Writing 61 model components to file: J1826-3650_S_2004_05_27_yyk_map.mod wobs J1826-3650_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1826-3650_S_2004_05_27_yyk_uvs.fits wwins J1826-3650_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J1826-3650_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00750403 Jy ! Component: 100 - total flux cleaned = 0.0136705 Jy ! Component: 150 - total flux cleaned = 0.0172072 Jy ! Component: 200 - total flux cleaned = 0.0198347 Jy ! Component: 250 - total flux cleaned = 0.0213477 Jy ! Component: 300 - total flux cleaned = 0.0222396 Jy ! Component: 350 - total flux cleaned = 0.0224069 Jy ! Component: 400 - total flux cleaned = 0.0227249 Jy ! Component: 450 - total flux cleaned = 0.0227252 Jy ! Component: 500 - total flux cleaned = 0.023308 Jy ! Component: 550 - total flux cleaned = 0.0237206 Jy ! Component: 600 - total flux cleaned = 0.0237168 Jy ! Component: 650 - total flux cleaned = 0.0246119 Jy ! Component: 700 - total flux cleaned = 0.0252332 Jy ! Component: 750 - total flux cleaned = 0.0259557 Jy ! Component: 800 - total flux cleaned = 0.0264191 Jy ! Component: 850 - total flux cleaned = 0.0267562 Jy ! Component: 900 - total flux cleaned = 0.0270861 Jy ! Component: 950 - total flux cleaned = 0.0274075 Jy ! Component: 1000 - total flux cleaned = 0.0277193 Jy ! Component: 1050 - total flux cleaned = 0.0279234 Jy ! Component: 1100 - total flux cleaned = 0.0280214 Jy ! Component: 1150 - total flux cleaned = 0.0278286 Jy ! Component: 1200 - total flux cleaned = 0.0273555 Jy ! Component: 1250 - total flux cleaned = 0.0270769 Jy ! Component: 1300 - total flux cleaned = 0.026531 Jy ! Component: 1350 - total flux cleaned = 0.0261739 Jy ! Component: 1400 - total flux cleaned = 0.0257343 Jy ! Component: 1450 - total flux cleaned = 0.0255607 Jy ! Component: 1500 - total flux cleaned = 0.0255597 Jy ! Component: 1550 - total flux cleaned = 0.0253079 Jy ! Component: 1600 - total flux cleaned = 0.0254743 Jy ! Component: 1650 - total flux cleaned = 0.0256376 Jy ! Component: 1700 - total flux cleaned = 0.0257192 Jy ! Component: 1750 - total flux cleaned = 0.0258788 Jy ! Component: 1800 - total flux cleaned = 0.026198 Jy ! Component: 1850 - total flux cleaned = 0.0265147 Jy ! Component: 1900 - total flux cleaned = 0.0269879 Jy ! Component: 1950 - total flux cleaned = 0.0274612 Jy ! Component: 2000 - total flux cleaned = 0.0278548 Jy ! Total flux subtracted in 2048 components = 0.0282515 Jy ! Clean residual min=-0.005135 max=0.004543 Jy/beam ! Clean residual mean=0.000020 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.35405 Jy keep ! Adding 120 model components to the UV plane model. ! The established model now contains 181 components and 0.35405 Jy ![Exited script file: muppet] wmap "J1826-3650_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 7.935 at -2.49 degrees (North through East) ! Clean map min=-0.0064789 max=0.26969 Jy/beam ! Writing clean map to FITS file: J1826-3650_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.269694 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0014587 device "J1826-3650_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1826-3650_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.62262 1.62262 3.24524 6.49049 12.981 25.962 51.9239 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.269 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 7.935 at -2.49 degrees (North through East) ! Clean map min=-0.0064789 max=0.26969 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1826-3650_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1826-3650_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1826-3650_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:44:13 2005