! Started logfile: J1804-3017_S_2004_05_27_yyk_uvs.log on Wed Dec  7 01:04:39 2005
obs J1804-3017_S_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J1804-3017_S_2004_05_27_yyk_uve.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.390476 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1804-3017
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1383 lines of history.
! 
! Reading 492 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1804-3017_S_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 2.00x2.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.119203 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 35 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.911794Jy  sigma=16.746986
! Fit after  self-cal, rms=0.909514Jy  sigma=16.732625
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.38 mas, bmaj=31.09 mas, bpa=4.884 degrees
! Estimated noise=3.67546 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0763664 Jy
! Component: 100  -  total flux cleaned = 0.0955811 Jy
! Total flux subtracted in 100 components = 0.0955811 Jy
! Clean residual min=-0.011577 max=0.012227 Jy/beam
! Clean residual mean=-0.000067 rms=0.003455 Jy/beam
! Combined flux in latest and established models = 0.0955812 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0955812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072542Jy  sigma=1.192305
! Fit after  self-cal, rms=0.072534Jy  sigma=1.191911
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.83 mas, bmaj=36.1 mas, bpa=14.58 degrees
! Estimated noise=1.96337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0190109 Jy
! Component: 100  -  total flux cleaned = 0.0279777 Jy
! Component: 150  -  total flux cleaned = 0.0332178 Jy
! Component: 200  -  total flux cleaned = 0.036507 Jy
! Total flux subtracted in 200 components = 0.036507 Jy
! Clean residual min=-0.009974 max=0.008209 Jy/beam
! Clean residual mean=0.000011 rms=0.002530 Jy/beam
! Combined flux in latest and established models = 0.132088 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 42 components and 0.132088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070331Jy  sigma=1.118916
! Fit after  self-cal, rms=0.070311Jy  sigma=1.117810
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.070311Jy  sigma=1.117810
! Fit after  self-cal, rms=0.070311Jy  sigma=1.117810
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070311Jy  sigma=1.117810
! Fit after  self-cal, rms=0.070313Jy  sigma=1.117809
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.83 mas, bmaj=36.1 mas, bpa=14.58 degrees
! Estimated noise=1.96337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300607 Jy
! Component: 100  -  total flux cleaned = 0.00472791 Jy
! Component: 150  -  total flux cleaned = 0.00562097 Jy
! Component: 200  -  total flux cleaned = 0.00591281 Jy
! Total flux subtracted in 200 components = 0.0059128 Jy
! Clean residual min=-0.009590 max=0.007827 Jy/beam
! Clean residual mean=0.000023 rms=0.002422 Jy/beam
! Combined flux in latest and established models = 0.138001 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.138001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070245Jy  sigma=1.115616
! Fit after  self-cal, rms=0.070273Jy  sigma=1.115227
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070273Jy  sigma=1.115227
! Fit after  self-cal, rms=0.065492Jy  sigma=1.021295
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00365065 Jy
! Component: 100  -  total flux cleaned = 0.00459227 Jy
! Component: 150  -  total flux cleaned = 0.0048314 Jy
! Component: 200  -  total flux cleaned = 0.00505278 Jy
! Total flux subtracted in 200 components = 0.00505278 Jy
! Clean residual min=-0.008530 max=0.007519 Jy/beam
! Clean residual mean=0.000025 rms=0.002263 Jy/beam
! Combined flux in latest and established models = 0.143054 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 53 components and 0.143054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065142Jy  sigma=1.018143
! Fit after  self-cal, rms=0.064959Jy  sigma=1.011347
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.83 x 36.1 at 14.58 degrees (North through East)
! Clean map  min=-0.008159  max=0.097809 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.57 mas, bmaj=37.38 mas, bpa=15.63 degrees
! Estimated noise=1.97504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000636503 Jy
! Component: 100  -  total flux cleaned = 0.000719521 Jy
! Component: 150  -  total flux cleaned = 0.000755482 Jy
! Component: 200  -  total flux cleaned = 0.000829419 Jy
! Total flux subtracted in 200 components = 0.000829419 Jy
! Clean residual min=-0.008533 max=0.006962 Jy/beam
! Clean residual mean=0.000028 rms=0.002167 Jy/beam
! Combined flux in latest and established models = 0.143883 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.143883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064891Jy  sigma=1.010645
! Fit after  self-cal, rms=0.064899Jy  sigma=1.009891
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.38 mas, bmaj=31.09 mas, bpa=4.884 degrees
! Estimated noise=3.67546 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0788357 Jy
! Component: 100  -  total flux cleaned = 0.100714 Jy
! Component: 150  -  total flux cleaned = 0.112531 Jy
! Component: 200  -  total flux cleaned = 0.120036 Jy
! Total flux subtracted in 200 components = 0.120036 Jy
! Clean residual min=-0.009205 max=0.008969 Jy/beam
! Clean residual mean=-0.000040 rms=0.002718 Jy/beam
! Combined flux in latest and established models = 0.120036 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.120036 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.83 mas, bmaj=36.1 mas, bpa=14.58 degrees
! Estimated noise=1.96337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141151 Jy
! Component: 100  -  total flux cleaned = 0.0196499 Jy
! Component: 150  -  total flux cleaned = 0.0215745 Jy
! Component: 200  -  total flux cleaned = 0.0226561 Jy
! Total flux subtracted in 200 components = 0.0226561 Jy
! Clean residual min=-0.008384 max=0.007342 Jy/beam
! Clean residual mean=0.000021 rms=0.002216 Jy/beam
! Combined flux in latest and established models = 0.142692 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.142692 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.57 mas, bmaj=37.38 mas, bpa=15.63 degrees
! Estimated noise=1.97504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104172 Jy
! Component: 100  -  total flux cleaned = 0.00143186 Jy
! Component: 150  -  total flux cleaned = 0.00168436 Jy
! Component: 200  -  total flux cleaned = 0.00184295 Jy
! Total flux subtracted in 200 components = 0.00184295 Jy
! Clean residual min=-0.008504 max=0.006852 Jy/beam
! Clean residual mean=0.000028 rms=0.002134 Jy/beam
! Combined flux in latest and established models = 0.144535 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.144535 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.83 mas, bmaj=36.1 mas, bpa=14.58 degrees
! Estimated noise=1.96337 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000142207 Jy
! Component: 100  -  total flux cleaned = -4.73136e-05 Jy
! Component: 150  -  total flux cleaned = -1.88213e-05 Jy
! Component: 200  -  total flux cleaned = 8.42942e-06 Jy
! Total flux subtracted in 200 components = 8.42942e-06 Jy
! Clean residual min=-0.008453 max=0.006887 Jy/beam
! Clean residual mean=0.000024 rms=0.002158 Jy/beam
! Combined flux in latest and established models = 0.144544 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 57 components and 0.144544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064598Jy  sigma=1.008964
! Fit after  self-cal, rms=0.064502Jy  sigma=1.007579
wmodel J1804-3017_S_2004_05_27_yyk\_map.mod
! Writing 57 model components to file: J1804-3017_S_2004_05_27_yyk_map.mod
wobs J1804-3017_S_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J1804-3017_S_2004_05_27_yyk_uvs.fits
wwins J1804-3017_S_2004_05_27_yyk\_map.win
! wwins: Wrote 1 windows to J1804-3017_S_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00212485 Jy
! Component: 100  -  total flux cleaned = -0.00293059 Jy
! Component: 150  -  total flux cleaned = -0.00277 Jy
! Component: 200  -  total flux cleaned = -0.0015486 Jy
! Component: 250  -  total flux cleaned = -0.000428593 Jy
! Component: 300  -  total flux cleaned = 0.000406551 Jy
! Component: 350  -  total flux cleaned = 0.00111867 Jy
! Component: 400  -  total flux cleaned = 0.00106277 Jy
! Component: 450  -  total flux cleaned = 0.000855244 Jy
! Component: 500  -  total flux cleaned = 0.000611836 Jy
! Component: 550  -  total flux cleaned = 0.00023596 Jy
! Component: 600  -  total flux cleaned = -0.000261603 Jy
! Component: 650  -  total flux cleaned = -0.000522274 Jy
! Component: 700  -  total flux cleaned = -0.000814355 Jy
! Component: 750  -  total flux cleaned = -0.00101513 Jy
! Component: 800  -  total flux cleaned = -0.00124764 Jy
! Component: 850  -  total flux cleaned = -0.0014335 Jy
! Component: 900  -  total flux cleaned = -0.0015064 Jy
! Component: 950  -  total flux cleaned = -0.0016129 Jy
! Component: 1000  -  total flux cleaned = -0.001682 Jy
! Total flux subtracted in 1024 components = -0.00168211 Jy
! Clean residual min=-0.002151 max=0.002234 Jy/beam
! Clean residual mean=-0.000006 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.142862 Jy
keep
! Adding 55 model components to the UV plane model.
! The established model now contains 112 components and 0.142862 Jy
![Exited script file: muppet]
wmap "J1804-3017_S_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.83 x 36.1 at 14.58 degrees (North through East)
! Clean map  min=-0.0064948  max=0.097716 Jy/beam
! Writing clean map to FITS file: J1804-3017_S_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0977163 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000706761 
device "J1804-3017_S_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J1804-3017_S_2004_05_27_yyk_map.eps/VPS'
loglevs 2*100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.33967 4.33967 8.67935 17.3587 34.7174 69.4348
print "clev=",int(2*3*image_rms*10000)/10000
! clev= 0.0042 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.097 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.83 x 36.1 at 14.58 degrees (North through East)
! Clean map  min=-0.0064948  max=0.097716 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1804-3017_S_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J1804-3017_S_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1804-3017_S_2004_05_27_yyk_uvs.log closed on Wed Dec  7 01:04:40 2005