! Started logfile: J1720-0832_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:39:15 2005 obs J1720-0832_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1720-0832_S_2004_05_27_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.903704 visibilities/baseline/integration-bin. ! Found source: J1720-0832 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1382 lines of history. ! ! Reading 1464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1720-0832_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.133642 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.889801Jy sigma=16.035319 ! Fit after self-cal, rms=0.889724Jy sigma=16.033378 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=6.966 mas, bpa=-4.434 degrees ! Estimated noise=1.6085 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0971803 Jy ! Component: 100 - total flux cleaned = 0.11525 Jy ! Total flux subtracted in 100 components = 0.11525 Jy ! Clean residual min=-0.006497 max=0.006878 Jy/beam ! Clean residual mean=0.000008 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.11525 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.11525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070167Jy sigma=1.031041 ! Fit after self-cal, rms=0.070157Jy sigma=1.030289 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.329 mas, bpa=-5.258 degrees ! Estimated noise=1.08576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519413 Jy ! Component: 100 - total flux cleaned = 0.00679146 Jy ! Component: 150 - total flux cleaned = 0.00698968 Jy ! Component: 200 - total flux cleaned = 0.00714269 Jy ! Total flux subtracted in 200 components = 0.00714269 Jy ! Clean residual min=-0.004285 max=0.006301 Jy/beam ! Clean residual mean=0.000027 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.122392 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.122392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069841Jy sigma=1.024759 ! Fit after self-cal, rms=0.069846Jy sigma=1.024637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0057 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.92 KP 0.96 ! LA 1.01 MK 0.96 NL 1.02 OV 1.00 ! PT 1.02 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984214 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.95 HN 1.08 KP 0.98 ! LA 1.01 MK 1.01 NL 0.98 OV 1.08 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01629 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.05 KP 0.84 ! LA 1.00* MK 0.93 NL 1.02 OV 0.88 ! PT 1.00 SC 1.19 ! ! ! Fit before self-cal, rms=0.069846Jy sigma=1.024637 ! Fit after self-cal, rms=0.069366Jy sigma=1.008532 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069366Jy sigma=1.008532 ! Fit after self-cal, rms=0.069382Jy sigma=1.008493 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=8.42 mas, bpa=-5.704 degrees ! Estimated noise=1.07952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000530147 Jy ! Component: 100 - total flux cleaned = -0.000693168 Jy ! Component: 150 - total flux cleaned = -0.000755769 Jy ! Component: 200 - total flux cleaned = -0.000783801 Jy ! Total flux subtracted in 200 components = -0.000783801 Jy ! Clean residual min=-0.004236 max=0.005727 Jy/beam ! Clean residual mean=0.000014 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.121609 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.121609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069325Jy sigma=1.007823 ! Fit after self-cal, rms=0.069328Jy sigma=1.007769 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069328Jy sigma=1.007769 ! Fit after self-cal, rms=0.066664Jy sigma=0.969397 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -10.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438101 Jy ! Component: 100 - total flux cleaned = 0.0047413 Jy ! Component: 150 - total flux cleaned = 0.00496609 Jy ! Component: 200 - total flux cleaned = 0.00515647 Jy ! Total flux subtracted in 200 components = 0.00515647 Jy ! Clean residual min=-0.003612 max=0.003276 Jy/beam ! Clean residual mean=0.000005 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.126765 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 80 components and 0.126765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066274Jy sigma=0.961875 ! Fit after self-cal, rms=0.065910Jy sigma=0.957939 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 8.42 at -5.704 degrees (North through East) ! Clean map min=-0.003564 max=0.1117 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065910Jy sigma=0.957939 ! Fit after self-cal, rms=0.065247Jy sigma=0.955961 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065247Jy sigma=0.955961 ! Fit after self-cal, rms=0.065163Jy sigma=0.955229 ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.406 mas, bpa=-5.801 degrees ! Estimated noise=1.07112 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000644944 Jy ! Component: 100 - total flux cleaned = 0.000708134 Jy ! Component: 150 - total flux cleaned = 0.000762827 Jy ! Component: 200 - total flux cleaned = 0.00085283 Jy ! Total flux subtracted in 200 components = 0.00085283 Jy ! Clean residual min=-0.003308 max=0.003380 Jy/beam ! Clean residual mean=0.000006 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.127618 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 104 components and 0.127618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065059Jy sigma=0.953574 ! Fit after self-cal, rms=0.065037Jy sigma=0.953226 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065037Jy sigma=0.953226 ! Fit after self-cal, rms=0.065690Jy sigma=0.944550 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065690Jy sigma=0.944550 ! Fit after self-cal, rms=0.065673Jy sigma=0.944374 ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=8.406 mas, bpa=-6.283 degrees ! Estimated noise=1.07444 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000855031 Jy ! Component: 100 - total flux cleaned = 0.000990104 Jy ! Component: 150 - total flux cleaned = 0.00102666 Jy ! Component: 200 - total flux cleaned = 0.00106234 Jy ! Total flux subtracted in 200 components = 0.00106234 Jy ! Clean residual min=-0.003163 max=0.003389 Jy/beam ! Clean residual mean=0.000005 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.12868 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 0.12868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065564Jy sigma=0.943332 ! Fit after self-cal, rms=0.065566Jy sigma=0.943239 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.76 mas, bmaj=14.99 mas, bpa=-11.41 degrees ! Estimated noise=1.35817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000632998 Jy ! Component: 100 - total flux cleaned = -0.000729135 Jy ! Component: 150 - total flux cleaned = -0.000814826 Jy ! Component: 200 - total flux cleaned = -0.000840733 Jy ! Total flux subtracted in 200 components = -0.000840733 Jy ! Clean residual min=-0.004444 max=0.003448 Jy/beam ! Clean residual mean=0.000013 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.12784 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 130 components and 0.12784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065557Jy sigma=0.943078 ! Fit after self-cal, rms=0.065557Jy sigma=0.943015 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=6.993 mas, bpa=-4.925 degrees ! Estimated noise=1.60053 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.098199 Jy ! Component: 100 - total flux cleaned = 0.115947 Jy ! Component: 150 - total flux cleaned = 0.124011 Jy ! Component: 200 - total flux cleaned = 0.12761 Jy ! Total flux subtracted in 200 components = 0.12761 Jy ! Clean residual min=-0.005650 max=0.005135 Jy/beam ! Clean residual mean=-0.000009 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.12761 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.12761 Jy ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=8.406 mas, bpa=-6.283 degrees ! Estimated noise=1.07444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137466 Jy ! Component: 100 - total flux cleaned = 0.00165415 Jy ! Component: 150 - total flux cleaned = 0.00181204 Jy ! Component: 200 - total flux cleaned = 0.00187744 Jy ! Total flux subtracted in 200 components = 0.00187744 Jy ! Clean residual min=-0.003545 max=0.003502 Jy/beam ! Clean residual mean=0.000002 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.129487 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 62 components and 0.129487 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.76 mas, bmaj=14.99 mas, bpa=-11.41 degrees ! Estimated noise=1.35817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000969282 Jy ! Component: 100 - total flux cleaned = -0.00105648 Jy ! Component: 150 - total flux cleaned = -0.00113115 Jy ! Component: 200 - total flux cleaned = -0.00119812 Jy ! Total flux subtracted in 200 components = -0.00119812 Jy ! Clean residual min=-0.004527 max=0.003429 Jy/beam ! Clean residual mean=0.000011 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.128289 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.128289 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=8.406 mas, bpa=-6.283 degrees ! Estimated noise=1.07444 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00084599 Jy ! Component: 100 - total flux cleaned = 0.000842809 Jy ! Component: 150 - total flux cleaned = 0.000842405 Jy ! Component: 200 - total flux cleaned = 0.000840437 Jy ! Total flux subtracted in 200 components = 0.000840437 Jy ! Clean residual min=-0.003343 max=0.003454 Jy/beam ! Clean residual mean=0.000005 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.12913 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.12913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065591Jy sigma=0.944288 ! Fit after self-cal, rms=0.065586Jy sigma=0.944138 wmodel J1720-0832_S_2004_05_27_yyk\_map.mod ! Writing 94 model components to file: J1720-0832_S_2004_05_27_yyk_map.mod wobs J1720-0832_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1720-0832_S_2004_05_27_yyk_uvs.fits wwins J1720-0832_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J1720-0832_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290733 Jy ! Component: 100 - total flux cleaned = -0.000509535 Jy ! Component: 150 - total flux cleaned = -0.000809971 Jy ! Component: 200 - total flux cleaned = -0.00108999 Jy ! Component: 250 - total flux cleaned = -0.00108821 Jy ! Component: 300 - total flux cleaned = -0.00108941 Jy ! Component: 350 - total flux cleaned = -0.0011666 Jy ! Component: 400 - total flux cleaned = -0.00120232 Jy ! Component: 450 - total flux cleaned = -0.00120212 Jy ! Component: 500 - total flux cleaned = -0.00127227 Jy ! Component: 550 - total flux cleaned = -0.00130697 Jy ! Component: 600 - total flux cleaned = -0.00147093 Jy ! Component: 650 - total flux cleaned = -0.0015655 Jy ! Component: 700 - total flux cleaned = -0.00156552 Jy ! Component: 750 - total flux cleaned = -0.00162609 Jy ! Component: 800 - total flux cleaned = -0.00171507 Jy ! Component: 850 - total flux cleaned = -0.00171537 Jy ! Component: 900 - total flux cleaned = -0.00174424 Jy ! Component: 950 - total flux cleaned = -0.00177275 Jy ! Component: 1000 - total flux cleaned = -0.00182694 Jy ! Component: 1050 - total flux cleaned = -0.00177372 Jy ! Component: 1100 - total flux cleaned = -0.00179938 Jy ! Component: 1150 - total flux cleaned = -0.00174872 Jy ! Component: 1200 - total flux cleaned = -0.00169927 Jy ! Component: 1250 - total flux cleaned = -0.00167488 Jy ! Component: 1300 - total flux cleaned = -0.00162677 Jy ! Component: 1350 - total flux cleaned = -0.00157911 Jy ! Component: 1400 - total flux cleaned = -0.00143948 Jy ! Component: 1450 - total flux cleaned = -0.00134841 Jy ! Component: 1500 - total flux cleaned = -0.00128121 Jy ! Component: 1550 - total flux cleaned = -0.00119316 Jy ! Component: 1600 - total flux cleaned = -0.00108391 Jy ! Component: 1650 - total flux cleaned = -0.000997955 Jy ! Component: 1700 - total flux cleaned = -0.000849794 Jy ! Component: 1750 - total flux cleaned = -0.000724968 Jy ! Component: 1800 - total flux cleaned = -0.000663329 Jy ! Component: 1850 - total flux cleaned = -0.000602225 Jy ! Component: 1900 - total flux cleaned = -0.000522225 Jy ! Component: 1950 - total flux cleaned = -0.000542039 Jy ! Component: 2000 - total flux cleaned = -0.000463483 Jy ! Total flux subtracted in 2048 components = -0.000405292 Jy ! Clean residual min=-0.001154 max=0.001144 Jy/beam ! Clean residual mean=0.000012 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.128724 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 226 components and 0.128724 Jy ![Exited script file: muppet] wmap "J1720-0832_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 8.406 at -6.283 degrees (North through East) ! Clean map min=-0.0025435 max=0.11213 Jy/beam ! Writing clean map to FITS file: J1720-0832_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112131 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000390511 device "J1720-0832_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1720-0832_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04479 1.04479 2.08958 4.17917 8.35834 16.7167 33.4334 66.8667 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 8.406 at -6.283 degrees (North through East) ! Clean map min=-0.0025435 max=0.11213 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1720-0832_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1720-0832_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1720-0832_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:39:19 2005