! Started logfile: J1635-1859_S_2004_05_27_yyk_uvs.log on Wed Dec  7 01:04:18 2005
obs J1635-1859_S_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J1635-1859_S_2004_05_27_yyk_uve.fits
! AN table 1: 15 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.574815 visibilities/baseline/integration-bin.
! Found source: J1635-1859
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1389 lines of history.
! 
! Reading 1552 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1635-1859_S_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.143514 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 67 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 85 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 81 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.912309Jy  sigma=16.784286
! Fit after  self-cal, rms=0.886809Jy  sigma=16.398496
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.766 mas, bmaj=21.55 mas, bpa=18.75 degrees
! Estimated noise=2.27567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0952424 Jy
! Component: 100  -  total flux cleaned = 0.113377 Jy
! Total flux subtracted in 100 components = 0.113377 Jy
! Clean residual min=-0.007822 max=0.007220 Jy/beam
! Clean residual mean=-0.000081 rms=0.002666 Jy/beam
! Combined flux in latest and established models = 0.113377 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.113377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083104Jy  sigma=1.144213
! Fit after  self-cal, rms=0.082925Jy  sigma=1.141706
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.38 mas, bmaj=26.74 mas, bpa=26.95 degrees
! Estimated noise=1.41865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00777148 Jy
! Component: 100  -  total flux cleaned = 0.0111074 Jy
! Component: 150  -  total flux cleaned = 0.0123411 Jy
! Component: 200  -  total flux cleaned = 0.0130169 Jy
! Total flux subtracted in 200 components = 0.0130169 Jy
! Clean residual min=-0.004548 max=0.003997 Jy/beam
! Clean residual mean=-0.000120 rms=0.001254 Jy/beam
! Combined flux in latest and established models = 0.126394 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 56 components and 0.126394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082479Jy  sigma=1.129309
! Fit after  self-cal, rms=0.082465Jy  sigma=1.129222
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.998014
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.03     HN        1.00*    KP        1.00     
!   LA        0.98     MK        1.00*    NL        1.06     OV        1.00     
!   PT        1.07     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00698
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.00*    KP        0.95     
!   LA        1.01     MK        1.00*    NL        1.00*    OV        0.99     
!   PT        0.91     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.082465Jy  sigma=1.129222
! Fit after  self-cal, rms=0.081037Jy  sigma=1.122825
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081037Jy  sigma=1.122825
! Fit after  self-cal, rms=0.081043Jy  sigma=1.122811
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.31 mas, bmaj=26.76 mas, bpa=27.69 degrees
! Estimated noise=1.40683 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536263 Jy
! Component: 100  -  total flux cleaned = 0.000585174 Jy
! Component: 150  -  total flux cleaned = 0.000703047 Jy
! Component: 200  -  total flux cleaned = 0.000735507 Jy
! Total flux subtracted in 200 components = 0.000735507 Jy
! Clean residual min=-0.004634 max=0.004096 Jy/beam
! Clean residual mean=-0.000136 rms=0.001277 Jy/beam
! Combined flux in latest and established models = 0.127129 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 73 components and 0.127129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081067Jy  sigma=1.121677
! Fit after  self-cal, rms=0.081063Jy  sigma=1.121641
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081063Jy  sigma=1.121641
! Fit after  self-cal, rms=0.075165Jy  sigma=1.030254
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200676 Jy
! Component: 100  -  total flux cleaned = 0.00250249 Jy
! Component: 150  -  total flux cleaned = 0.00258834 Jy
! Component: 200  -  total flux cleaned = 0.00268621 Jy
! Total flux subtracted in 200 components = 0.00268621 Jy
! Clean residual min=-0.004534 max=0.003997 Jy/beam
! Clean residual mean=-0.000134 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.129815 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 94 components and 0.129815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074982Jy  sigma=1.028968
! Fit after  self-cal, rms=0.074263Jy  sigma=1.022918
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.31 x 26.76 at 27.69 degrees (North through East)
! Clean map  min=-0.0044816  max=0.11407 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074263Jy  sigma=1.022918
! Fit after  self-cal, rms=0.074272Jy  sigma=1.020728
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074272Jy  sigma=1.020728
! Fit after  self-cal, rms=0.074144Jy  sigma=1.019792
! Inverting map and beam 
! Estimated beam: bmin=11.35 mas, bmaj=26.46 mas, bpa=27.46 degrees
! Estimated noise=1.41145 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000693338 Jy
! Component: 100  -  total flux cleaned = 0.000695831 Jy
! Component: 150  -  total flux cleaned = 0.000665803 Jy
! Component: 200  -  total flux cleaned = 0.00066352 Jy
! Total flux subtracted in 200 components = 0.00066352 Jy
! Clean residual min=-0.004352 max=0.003917 Jy/beam
! Clean residual mean=-0.000121 rms=0.001222 Jy/beam
! Combined flux in latest and established models = 0.130479 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 102 components and 0.130479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074070Jy  sigma=1.019196
! Fit after  self-cal, rms=0.074064Jy  sigma=1.018929
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074064Jy  sigma=1.018929
! Fit after  self-cal, rms=0.073210Jy  sigma=1.018740
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073210Jy  sigma=1.018740
! Fit after  self-cal, rms=0.073298Jy  sigma=1.018448
! Inverting map and beam 
! Estimated beam: bmin=11.48 mas, bmaj=26.16 mas, bpa=26.71 degrees
! Estimated noise=1.40203 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00193544 Jy
! Component: 100  -  total flux cleaned = -0.00179678 Jy
! Component: 150  -  total flux cleaned = -0.0016355 Jy
! Component: 200  -  total flux cleaned = -0.00155035 Jy
! Total flux subtracted in 200 components = -0.00155035 Jy
! Clean residual min=-0.004423 max=0.004013 Jy/beam
! Clean residual mean=-0.000088 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.128929 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 115 components and 0.128928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073282Jy  sigma=1.017437
! Fit after  self-cal, rms=0.073320Jy  sigma=1.017356
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.34 mas, bmaj=26.65 mas, bpa=26.57 degrees
! Estimated noise=1.41254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000171676 Jy
! Component: 100  -  total flux cleaned = -0.000125229 Jy
! Component: 150  -  total flux cleaned = -8.16734e-05 Jy
! Component: 200  -  total flux cleaned = -4.25496e-05 Jy
! Total flux subtracted in 200 components = -4.25496e-05 Jy
! Clean residual min=-0.004268 max=0.004200 Jy/beam
! Clean residual mean=-0.000104 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.128886 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 127 components and 0.128886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073312Jy  sigma=1.017147
! Fit after  self-cal, rms=0.073330Jy  sigma=1.017116
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.762 mas, bmaj=21.28 mas, bpa=17.99 degrees
! Estimated noise=2.24261 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0975509 Jy
! Component: 100  -  total flux cleaned = 0.117304 Jy
! Component: 150  -  total flux cleaned = 0.122099 Jy
! Component: 200  -  total flux cleaned = 0.123666 Jy
! Total flux subtracted in 200 components = 0.123666 Jy
! Clean residual min=-0.007575 max=0.006829 Jy/beam
! Clean residual mean=-0.000040 rms=0.002289 Jy/beam
! Combined flux in latest and established models = 0.123666 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.123666 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.48 mas, bmaj=26.16 mas, bpa=26.71 degrees
! Estimated noise=1.40203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00357172 Jy
! Component: 100  -  total flux cleaned = 0.00464587 Jy
! Component: 150  -  total flux cleaned = 0.00487865 Jy
! Component: 200  -  total flux cleaned = 0.00487389 Jy
! Total flux subtracted in 200 components = 0.00487389 Jy
! Clean residual min=-0.004641 max=0.003802 Jy/beam
! Clean residual mean=-0.000096 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.128539 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 61 components and 0.128539 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.34 mas, bmaj=26.65 mas, bpa=26.57 degrees
! Estimated noise=1.41254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162815 Jy
! Component: 100  -  total flux cleaned = -0.000124956 Jy
! Component: 150  -  total flux cleaned = -9.14974e-05 Jy
! Component: 200  -  total flux cleaned = -6.23354e-05 Jy
! Total flux subtracted in 200 components = -6.23354e-05 Jy
! Clean residual min=-0.004368 max=0.003987 Jy/beam
! Clean residual mean=-0.000109 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 0.128477 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.128477 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.48 mas, bmaj=26.16 mas, bpa=26.71 degrees
! Estimated noise=1.40203 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 7.38804e-05 Jy
! Component: 100  -  total flux cleaned = 0.000136455 Jy
! Component: 150  -  total flux cleaned = 0.000162191 Jy
! Component: 200  -  total flux cleaned = 0.000136644 Jy
! Total flux subtracted in 200 components = 0.000136644 Jy
! Clean residual min=-0.004416 max=0.003872 Jy/beam
! Clean residual mean=-0.000094 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.128614 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 85 components and 0.128614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073325Jy  sigma=1.017296
! Fit after  self-cal, rms=0.073350Jy  sigma=1.017238
wmodel J1635-1859_S_2004_05_27_yyk\_map.mod
! Writing 85 model components to file: J1635-1859_S_2004_05_27_yyk_map.mod
wobs J1635-1859_S_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J1635-1859_S_2004_05_27_yyk_uvs.fits
wwins J1635-1859_S_2004_05_27_yyk\_map.win
! wwins: Wrote 1 windows to J1635-1859_S_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000585594 Jy
! Component: 100  -  total flux cleaned = -0.000652262 Jy
! Component: 150  -  total flux cleaned = -0.000656172 Jy
! Component: 200  -  total flux cleaned = -0.000709374 Jy
! Component: 250  -  total flux cleaned = -0.000576578 Jy
! Component: 300  -  total flux cleaned = -0.000413567 Jy
! Component: 350  -  total flux cleaned = -0.000225389 Jy
! Component: 400  -  total flux cleaned = -0.000293707 Jy
! Component: 450  -  total flux cleaned = -0.000293181 Jy
! Component: 500  -  total flux cleaned = -0.000230177 Jy
! Component: 550  -  total flux cleaned = -0.00020044 Jy
! Component: 600  -  total flux cleaned = -0.000171412 Jy
! Component: 650  -  total flux cleaned = -0.000114657 Jy
! Component: 700  -  total flux cleaned = -8.72833e-05 Jy
! Component: 750  -  total flux cleaned = -6.14321e-05 Jy
! Component: 800  -  total flux cleaned = -0.000112313 Jy
! Component: 850  -  total flux cleaned = -0.000235762 Jy
! Component: 900  -  total flux cleaned = -0.000403445 Jy
! Component: 950  -  total flux cleaned = -0.000566749 Jy
! Component: 1000  -  total flux cleaned = -0.000749263 Jy
! Total flux subtracted in 1024 components = -0.000839063 Jy
! Clean residual min=-0.001357 max=0.001318 Jy/beam
! Clean residual mean=-0.000046 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.127775 Jy
keep
! Adding 69 model components to the UV plane model.
! The established model now contains 154 components and 0.127775 Jy
![Exited script file: muppet]
wmap "J1635-1859_S_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.48 x 26.16 at 26.71 degrees (North through East)
! Clean map  min=-0.0043256  max=0.11383 Jy/beam
! Writing clean map to FITS file: J1635-1859_S_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.113833 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000513765 
device "J1635-1859_S_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J1635-1859_S_2004_05_27_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.35399 1.35399 2.70799 5.41597 10.8319 21.6639 43.3278 86.6555
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.113 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.48 x 26.16 at 26.71 degrees (North through East)
! Clean map  min=-0.0043256  max=0.11383 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1635-1859_S_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J1635-1859_S_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1635-1859_S_2004_05_27_yyk_uvs.log closed on Wed Dec  7 01:04:19 2005